PowerBlock SPORT 24 User manual

1
4
5
3
2
PLACE APPROPRIATE ADHESIVE
BACKED WEIGHT CHARTS
IN POSITION AS SHOWN.
6
TOOLS NEEDED: One 17 mm & One 16 mm Wrench
USING THE HARDWARE PROVIDED
AND USING THE HOLES ON THE METAL PLATES
, 1.
ATTACH THE BARBELL HANDLES TO THE BAR.
SPORT 24 BARBELL HANDLE ASSEMBLY INSTRUCTIONS
PAGE 1
ITEM NO. DESCRIPTION QTY.
1 STRAIGHT OR EZ CURL BAR 1
2 BARBELL HANDLES 2
3 STEEL BOLTS M10 - 1.5 X 25 mm 4
4 STEEL NUTS M10 - 1.5 4
5 STEEL WASHERS M10 8
6 DECAL WEIGHT CHARTS 2

SPORT 24 BARBELL HANDLE ASSEMBLY INSTRUCTIONS
PAGE 2
Thank you for purchasing the PowerBlock Barbell System. If you have any questions
concerning this product, please email customer service at [email protected].
Warning: Before using PowerBlock products, read owners manual supplied with
PowerBlock weight set and all labels. Failure to follow all safety precautions
and instructions can result in serious injury. If manual is missing, obtain a
replacement from www.powerblock.com.
Warning: Barbell system is rated at 100 lbs. total load. Barbell is never to exceed max
weight of 100 lbs. Failure to observe this maximum load rating could result in falling
weights and/or injury.
Warning: Never adjust weight set and/or bar unless securely positioned on the
floor/ground or flat surface. Failure to do so can result in falling wieghts and/or
serious injury.
Please inspect the barbell system prior to each use. Do not use the barbell system if parts
are worn, damaged, or loose. Please check to make sure all parts are tightened before
use