Powerline 3DG User manual

3DG
MULTI-LINE LASER
INSTRUCTION MANUAL

2
SAFETY
Read the following safety instructions before
attempting to operate this product.
Keep these instructions in a safe place or store
in the carry case for future reference.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE.
WARNING: Read and understand all
instructions.
▪Use the laser only with the specically
designated batteries.
▪Store the laser out of reach of children and
other untrained persons. Lasers are dangerous
in the hands of untrained users.
▪Use only accessories that are recommended
for your model.
!
▪Tool service must be performed only by
qualied repair personnel. Repairs, service
or maintenance performed by unqualied
personnel will void the warranty. Only
approved and authorised service technicians
can carry out warranty repairs.
▪Do not use optical tools such as a telescope
or transit to view the laser beam. Serious eye
injury could result.
▪Do not place the laser in a position which
may cause anyone to intentionally or
unintentionally stare into the laser beam.
Serious eye injury could result.
▪ Do not position the laser near a reective
surface which may reect the laser beam
toward anyone’s eyes. Serious eye injury
could result.
▪Do not use optical tools to view the laser
beam.

3
!
!
▪Do not set up the tool at a position where
the laser beam can cross any person at head
height.
▪Do not let children come in contact with the
laser.
▪ Turn the laser o when it is not in use. Leaving
the laser on increases the risk of staring into
the laser beam.
▪Do not operate the laser around children or
allow children to operate the laser. Serious eye
injury may result.
▪Do not remove or deface warning labels.
▪Position the laser securely on a level surface.
Damage to the laser or serious injury could
result if the laser falls.
WARNING: DO NOT DISASSEMBLE
THE LASER. There are no user serviceable
parts inside. Disassembling the laser will
void all warranties on the product. Do not
modify the product in any way. Modifying
the tool may result in hazardous laser
radiation exposure.
CAUTION: Class 3 Laser Product
▪Never look into the laser beam directly and
intentionally.
▪Do not use optical tools to view the laser
beam.
▪Do not set up the tool at a position where
the laser beam can cross any person at
head height.
▪Do not let children come in contact with
the laser.

4
Carry case
Rechargeable
batteries
Multi-purpose mount
(two piece)
Powerline 3DG Detector & clamp
ITEM CHECKLIST
Please ensure the following items are included with your laser level.
If anything is missing please contact your retailer.
Laser glasses
Indoor lithium-ion
charger (two piece)
Mains power
adaptor
Laser target
INCHES CM
1
1
2
3
4
5
6
7
2
3

5
LASER OVERVIEW
Laser port
Laser port
1/4” tripod thread Battery door cover
Control panel
Power / locking switch
Mains power port

6
LASER CONTROL PANEL
Line mode
Pulse mode
Battery indicator
Locking indicator
Pulse mode indicator

7
DETECTOR OVERVIEW
Line mode
Speaker
Sound on / off
LED speaker indicator
Laser sensor
Power
Bubble vial
LED power indicator
LED direction indicator
LED direction indicator
LED centre indicator
Bubble vial

8
POWER SUPPLY
USING YOUR LASER
▪The instrument is supplied with four AA
lithium-ion batteries as its standard power
source.
▪The instrument can also be powered by the
mains power supply.
Charging or replacing the Li-ion batteries
▪Remove the battery cover door and the
batteries.
▪Insert the batteries into the indoor charger.
The indoor charger can be powered via
the supplied power cable or via the mains
power adaptor. The indoor charger can also
be powered via a micro USB cable (not
supplied).
▪The indoor charger will display progress
on the charging LED idicators as below:
Red = Battery is charging
Blue = Battery is charged
▪ When fully charged, insert the batteries
into the instrument according to polarity
and replace the battery door.
▪Do not store in locations where moisture
can be present or where the charger could
be exposed to extreme temperatures.
NOTE: The indoor charger is designed for
lithium-ion batteries only. Do not attempt to
charge Ni-Mh or alkaline batteries.

9
INDOOR CHARGER OVERVIEW
Micro USB port (cable not supplied)
Power LED indicator
Charging LED indicators
Mains power adaptor port Power cable port

10
Mains power
▪The instrument can operate on mains
power as an alternative to battery
operation.
▪Insert the mains power adaptor into the
port and plug into a power source.
▪Do not store in locations where moisture
can be present or where the adaptor could
be exposed to extreme temperatures.
NOTE: The mains power adaptor does
not charge the batteries. (To charge the
batteries, follow the procedure on page 8).