Powerline XL5 User manual

INSTRUCTION MANUAL
XL5 Multi-line Laser

2
Please read this instruction manual before operating this product.
Please store this instruction manual in the carry case for future reference.
CAUTION: Class 2 Laser Product
Do not stare directly into the laser beam from apertures.
Do not disassemble the instrument or attempt to perform any internal servicing
as this will void your warranty. No user serviceable parts included.
Only approved and authorised service technicians can carry out warranty repairs.
SAFETY

3
Carry case
Laser glasses
Battery packCharger
Wall mount
Detector and clamp Laser target
Tripod spacer
Powerline XL5
Please ensure the following items are included with your laser.
If anything is missing please contact your retailer.
ITEM CHECKLIST
INCHES CM
1
1
2
3
4
5
6
7
2
3
MODE

4
Adjustable support legs
360° protractor base
Carry strap
Vertical laser ports (x4)
PRODUCT OVERVIEW
Horizontal laser port (x4)
Control panel

5
CONTROL PANEL
V1V2
H
PULSE
Vertical lines
Power
Levelling LED
Power indicator
Horizontal lines
Vertical line
Pulse mode indicator
Pulse mode

6
MODE
DETECTOR CONTROL PANEL
Sound on / off
Laser sensor
Power indicator
Coarse / fine mode indicator
Coarse / fine mode
Bubble vial
On/off switch
Direction arrows

7
USING YOUR LASER
Setting Up
Power Supply
Operation
‣Select a place as close as practical to the work site.
Ensure the location is clear of traffic.
‣Place the laser on a level surface such as a bench or mount.
The XL5 is powered by a lithium-ion battery pack.
‣To turn the unit on press the power button. Self levelling will
commence and the horizontal beam will appear.
‣If the unit is outside the self levelling range the unit will not
level and the beam will flash repeatedly.
‣Press the V1, V2 and Hbutton on the control panel to cycle
through the active beams.

8
Using Your Detector
‣Press the pulse button on the control panel on top of the laser to
enter into pulse mode.
‣Switch the detector on and move it into the path of the laser beam.
‣Hold the detector upright for horizontal beams. Rotate the detector 90°
for vertical beams. The direction arrows will indicate the position of the
laser beam. The centre LED will indicate alignment with the beam.
MODE
MODE

9
CARE AND MAINTENANCE
‣Reflective surfaces such as glass may reflect the beam, causing
two beams to strike the detector at the same time. This may
create inaccurate reference points.
‣This is a precision instrument and should always be transported
within the carry case provided.
‣Always turn the unit off before transporting.
‣Whenever possible, store the instrument in a dry, shady location.
‣The XL5 should be calibrated every 6 months, if ongoing accurate
levelling is required or an impact has occurred.
‣The operator should check the XL5 for accuracy before precision
levelling is attempted.
‣Clean the instrument with a dry, soft cloth after use in dusty, damp
or wet conditions before storing.
‣Smudges and fingerprints may be removed with a damp tissue
or a soft, lint-free cloth.

10
WARRANTY
The Powerline XL5 comes with a 6 year manufacturers warranty.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.
Separate to the above Australia Consumer Law, Spot-on oers a global warranty.
Customer Support
To assist you with any queries or technical questions please contact the
customer support line: 1300 658 338
Operates 5 days a week: 8am - 5pm (EST)
30 Day Free Service
If your laser is out of calibration within the rst 30 days of purchase you
are entitled to a free calibration adjustment. For more information please
contact your retailer or Spot-on.

11
SPECIFICATIONS
Specications Powerline XL5
Product code 50030
Warranty 6 Years
Accuracy ±1mm at 10m
Range 50m
Levelling range ±8°
Laser class 2 Red
Battery life 8 hours
Battery type Lithium-ion (sealed pack)
Vertical lines 4
Horizontal lines 4
IP rating 65
Weight (kg) 1.50
Dimensions (mm) 210x130x130

www.spoton.com.au