PowerMadd 34452 ATV/MX Mount User manual

PowerMadd Sentinel Handguard mounting on
KTM 690/790/1090/1190/1290 Adventure
34452 ATV/MX Mount
NOTE: Use these instructions along with the instructions provided with the mount kit.
Clutch side:
Loosen the clutch perch assembly
and slide to the left up against control
cluster. Mount bracket underneath
the lever right next to clutch perch as
shown in photo. Adjust height and
width of the handguard to your
preference using the instructions
included in the 34452 mounting kit.
Tighten all fasteners.
Use 34253 handwrap instructions to
install handwrap.
Throttle side:
Loosen front brake perch and slide to
the left (towards center of motorcycle)
just enough to make room for the
mounting bracket. Mount bracket
over the brake lever, between brake
perch and throttle assembly as
shown in the photo. Adjust height and
width of the handguard to your
preference using the instructions
included in the 34452 mounting kit.
Tighten all fasteners.
Use the 34253 handwrap instructions
to install handwrap.

Sentinel Street LED light kit Instructions
KTM 690/790/1090/1190/1290 Adventure
34491
NOTE: Use these instructions along with the instructions provided with the Sentinel
Street LED light kit.
NOTE: KTM has two accessory leads. ACC1 = constant power. ACC2 power when key
is on.
Remove the headlight to expose wires. See owners manual for disassembly instructions.
Connect all four of the supplied spade terminals to the four wires on the LED module.
1.) Find the
ACC 2
accessory wires.
Connect the
wire labeled “-“
to the brown
wire and the
wire label “+” to
the other wire.
2.) Find the
right turn signal
wires. Remove
a 1.5” section of
the wire cover.
Connect a
supplied T-tap
to the hot wire
(blk/white). The
white wire
labeled “right”
will connect
here.
3.) Find the left
turn signal
wires. Remove
a 1.5” section of
the wire cover.
Connect a
supplied T-tap
to the hot wire
(purple). The
yellow wire
labeled “left” will
connect here.
Using the instructions provided with the 34491 kit, complete the installation of the Sentinel Street LED
light kit.