Powerplus POWXG4035 User manual

POWXG4035 EN
Copyright © 2015 VARO P a g e | 1www.varo.com
1APPLICATION..................................................................................2
2DESCRIPTION (FIG A) ....................................................................2
3PACKAGE CONTENT LIST.............................................................2
4SYMBOLS........................................................................................3
5FAMILIARIZING YOURSELF WITH THE BLOWER.......................3
5.1 Instructions .............................................................................................................3
5.2 Safety and health precautions ...............................................................................3
6OPERATING THE DEVICE..............................................................4
7MAINTENANCE AND STORAGE....................................................4
8BEFORE USE...................................................................................4
9ASSEMBLY......................................................................................5
9.1 safety switch ...........................................................................................................5
9.2 Shoulder strap: .......................................................................................................5
9.3 Leaf bag (Fig. 2) ......................................................................................................5
10 OPERATION.....................................................................................5
10.1 Switching ON/OFF...................................................................................................5
10.2 Speed regulation.....................................................................................................5
10.3 Use/Operation. ........................................................................................................5
10.4 Switching operating mode (Fig. 3).........................................................................5
10.5 Leaf bag (Fig. 4) ......................................................................................................5
11 MAINTENANCE ...............................................................................6
12 TECHNICAL DATA..........................................................................6
13 NOISE...............................................................................................6
14 SERVICE DEPARTMENT................................................................6
15 WARRANTY.....................................................................................6
16 ENVIRONMENT ...............................................................................7
17 DECLARATION OF CONFORMITY ................................................8

POWXG4035 EN
Copyright © 2015 VARO P a g e | 2www.varo.com
LEAF BLOWER/ VACUUM 3000W
POWXG4035
1 APPLICATION
The blower/vacuum is designed to blow/vacuum leaves as well as lawn debris such as grass
clippings and small twigs. It is not to be used for any other purpose
The device is only to be used on dry surfaces,
The device is intended for non-commercial use in private home* and gardens. Under no
circumstances is it to be used in public outdoor areas, sports stadiums or in agricultural or
forestry settings. It is not designed for commercial use.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION (FIG A)
1. Bottom tube section
2. Rollers
3. Top tube section
4. Leaf bag securing clip on the top
tube
5. Leaf bag
6. Blow - Vacuum function selector
lever
7. Motor casing
8. Shoulder strap
9. Main ON/OFF switch
10. Speed Control
3 PACKAGE CONTENT LIST
Remove all packing materials
Remove remaining packaging and transit supports (if existing)
Check the completeness of the packing content
Check the appliance, the power cord, the power plug and all accessories for transportation
damages.
Keep the packaging materials as far as possible till the end of the warranty period.
Dispose it into your local waste disposal system afterwards.
WARNING Packing materials are no toys! Children must not play with
plastic bags! Danger of suffocation!
leaf blower/ vacuum 3000W
Shoulder strap
Leaf bag
Instruction Manual
When parts are missing or damaged, please contact your dealer.

POWXG4035 EN
Copyright © 2015 VARO P a g e | 3www.varo.com
4 SYMBOLS
In this manual and/or on the machine the following symbols are used:
Warning / Danger
Keep bystanders away.
Read manual before usage
Remove plug from the
mains immediately if the
cable is damaged or cut.
In accordance with essential
applicable safety standards of
European directives
Switch off and unplug the
device before cleaning or
performing maintenance on
it.
Never operate or leave the
machine in the rain or in
damp or wet conditions.
Moisture is an electrical
shock hazard.
Wear ear guards and
goggles.
Class II - The machine is double insulated; Earthing wire is therefore not
necessary.
5 FAMILIARIZING YOURSELF WITH THE BLOWER
5.1 Instructions
Read these instructions carefully so as to familiarize yourself with proper use of the device
and its operating and control functions.
Under no circumstances should children be permitted to operate the blower.
Under no circumstances should persons who are unfamiliar with the contents of these
instructions be permitted to operate the device. Ordinances and regulations in some
municipalities may set a minimum age for operation of the blower
Under no circumstances should the blower ever be operated when other persons,
particularly children, or pets are nearby.
The user is liable for any accidents or damage incurred by third parties or their property.
5.2 Safety and health precautions
When you operate t he blower, always wear full-length trousers, as well as sturdy, closed
shoes that provide good support.
Under no circumstances should jewelry, any other body ornamentation, or loose clothing
be worn while operating the device as these items could be drawn into the suction orifice.
When working outdoors, rubber gloves and n on-slip footwear should always be worn. If
you have long hair, put it in a hair net.
Wear protective garb and goggles. Wearing protective garb such as a dust mask, non-slip
footwear, protective gloves, a helmet and/or hearing protection (depending on the type
and application of the electrical device concerned) reduces the risk of injury.
When performing work that generates dust, wear a breathing mask.
Each time you use the blower, check the integrity of the device's power cord and your own
extension cord. The device should only be operated when its accessories are in perfect
working order. Any damaged or defective components should be repaired immediately by
a qualified technician.

POWXG4035 EN
Copyright © 2015 VARO P a g e | 4www.varo.com
Under no circumstances should the blower be operated while you are wearing damaged
protective garb, shielding or without basic safely equipment such as a deflection device or
collection bag.
Only extension cords that are rated for outdoor use should be used outdoors. Any
extension cord used should measure a minimum of 1.5 mm across.
All plug-in connections should have an earthing contact and water-spray shielding.
6 OPERATING THE DEVICE
Make sure the power cord is kept behind and away from the device while you work.
If the power cord or extension cord are damaged while you work, unplug the blower
immediately. Disconnect the plug from the power source before making any adjustments,
changing accessories, or storing power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
Never use the power cord as a handle to lift or carry the device.
Always unplug the device under the fol lowing circumstances:
oWhen the blower is not in use, is being carried/transported, or is left
unattended.
oWhile examining, cleaning or unclogging the device.
oWhen cleaning the device, performing maintenance on it, or attaching
accessories to it.
oIf the device strikes a foreign object or begins vibrating abnormally.
Use the blower in daylight or with adequate illumination.
Bear in mind that the force generated by an electrical device can make you lose your
balance. Therefore, make sure that your feet are firmly planted and that your body is well
balanced when you are operating the device.
Never operate the blower on damp or wet grass.
Using the blower on sloping areas: Do not work in areas with unduly steep slopes.
Use the blower as follows when working on slopes:
Always position yourself horizontally to the slope and make sure your feet are firmly
planted. Exercise particular caution whenever you change directions while working on a
slope.
Walk at a measured pace while operating the blower. DO NOT RUN.
Keep the air outlet unobstructed and clean at all times.
Never direct the suction/blown air opening toward persons or animals.
7 MAINTENANCE AND STORAGE
Make sure that all screws, nuts and bolts are tight; doing this will ensure that the blower is
safe to operate.
Check the collection bag regularly for signs of wear and/or distortion.
Make sure the correct type of replacement cutting blades are used.
For reasons of safety, any worn or damaged component should be replaced or repaired
immediately by a qualified technician.
When not in use, the blower should be stored in a dry location that is inaccessible to
children.
The blower can be plugged into any 230 volt AC outlet with 10 amps of fuse protection.
The electrical outlet is to be protected by an earth leakage circuit breaker (ELCB). with a
max triggering current of 30 m amps.
8 BEFORE USE
Steps prior to operation
Only operate the device after completely assembling it. Prior to each use, check the power
cord for signs of damage. Under no circumstances should the power cord be used if it shows
any signs of damage.

POWXG4035 EN
Copyright © 2015 VARO P a g e | 5www.varo.com
9 ASSEMBLY
You new blower vac requires very little assembly work before it is ready for use. (Fig. 1)
ATTENTION ! The 2 supplied tube parts have to be mounted otherwise the machine will NOT
work ! (build in safety switch !)
9.1 safety switch
Your blow-vac has a build in safety switch that prevents the machine from being started in
case the supplied tubes are not mounted.
9.2 Shoulder strap:
The shoulder strap will be supplied inside the leaf bag. Take the shoulder strap out of the leaf
bag, open the snap fastener, thread the strap through the metal clip on the top of the motor
casing and then close the snap fastener. To adjust the shoulder strap to the required length,
simply slide the adjustable strap buckle forward or backwards.
9.3 Leaf bag (Fig. 2)
To secure the leaf bag to the machine, simply attach the buckle to the top tube section
and pull the expanding bag opening over the leaf discharge point on the bottom of the motor
casing. Then tighten the securing belt.
10 OPERATION
Ensure that the blower vac is only connected to conventional sockets with a 240V alternating
current supply. Only use extension cables if they are really necessary. The use of extension
cables may cause a drop in voltage, which will result in the machine not performing to its peak
or the motor overheating.
10.1 Switching ON/OFF
To switch on the blow/vac push in the on/off trigger switch (9). And hold
to switch off the machine, release the on/off trigger switch.
10.2 Speed regulation
You can vary the speed by turning the switch (10) from 1 (low speed) to 6 (high speed)
10.3 Use/Operation.
The easiest way to use the blower vac is to place the shoulder strap in a comfortable position
over your shoulder and hold the rear handle at hip height so that the majority of the machine’s
weight rests on the rollers.
When using the blower vac to pick up leaves it is best to move the machine on the rollers. This
ensures that the blower vac is at the perfect height above the ground. The blower vac is
designed only to pick up leaves. To avoid machine damage that is not covered by the warranty,
do not use it to pick up branches, stones or other hard materials.
When using the machine as a leaf blower always work away from solid objects such as walls,
fences, etc. Whilst you work do not place the blower vac tube too close to the leaves. The
machine will be more effective if you keep it at a certain distance away from the leaves and
blow the leaves forwards.
10.4 Switching operating mode (Fig. 3)
To switch the machine from blower mode to vacuum mode, simply switch it off at the main
switch and move the function selector lever to the other position.
10.5 Leaf bag (Fig. 4)
Note: Before you remove and empty the leaf bag ensure that the machine has been
disconnected from the mains power supply.
To empty the leaf bag simply open the zip fastener, empty the bag and then close the zip
fastener again.

POWXG4035 EN
Copyright © 2015 VARO P a g e | 6www.varo.com
When the leaf bag is open you can also check the function of the blower vac’s slide control. If
there is a blockage in the machine, check this function and remove the blockage.
11 MAINTENANCE
Check the blower vac for any signs of damage before each use
After using the machine
1. Empty the leaf bag.
2. Check the vacuum tube and remove leaf residue.
3. Check the blower vac’s slide control for leaf residue.
4. Clean the machine with a soft dry cloth.
5. Store the machine in a safe place where it is out of the reach of children.
12 TECHNICAL DATA
POWXG4035
voltage :
230V-240V~ 50 Hz
Power
3000W
no load speed :
6000-15000 min-1
max airspeed
270 km/h
max air volume
14 m³/min
dust bag
50 L
shredding ratio :
10:1
13 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
86 dB(A)
Acoustic power level LwA
99 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
1.3 m/s²
K = 1,5 m/s²
14 SERVICE DEPARTMENT
Damaged switches must be replaced by our after-sales service department.
If the connecting cable (or mains plug) is damaged, it must be replaced by a particular
connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by
a qualified person (qualified electrician).
15 WARRANTY
This product is warranted for a 36-month period effective from the date of purchase by the
first user.
This warranty covers all material or production flaws excluding : batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
We also disclaim all liability for any bodily injury resulting from inappropriate use of the
tool.

POWXG4035 EN
Copyright © 2015 VARO P a g e | 7www.varo.com
Repairs may only be carried out by an authorised customer service centre for Powerplus
tools.
You can always obtain more information at the number 00 32 3 292 92 90.
Any transportation costs shall always be borne by the customer, unless agreed otherwise
in writing.
At the same time, no claim can be made on the warranty if the damage of the device is the
result of negligent maintenance or overload.
Definitely excluded from the warranty is damage resulting from fluid permeation, excessive
dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate
usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not
following the instructions given in the manual), inexpert assembly, lightning strike,
erroneus net voltage. This list is not exhaustive.
Acceptance of claims under warranty can never lead to the prolongation of the warranty
period nor commencement of a new warranty period in case of a device replacement.
Devices or parts which are replaced under the warranty therefore remain the property of
Varo NV.
We reserve the right to reject a claim whenever the purchase cannot be verified or when it
is clear that the product has not been properly maintained. (Clean ventilation slots, carbon
brushes serviced regularly, etc.).
Your purchase receipt must be kept as proof of date of purchase.
Your appliance must be returned undismantled to your dealer in an acceptably clean state,
(in its original blow-moulded case if applicable to the unit), accompanied by proof of
purchase.
16 ENVIRONMENT
Should your appliance need replacement after extended use, do not dispose of it
with the household refuse, but in an environmentally safe way.
Waste produced by electrical machine items should not be handled like normal
household rubbish. Please recycle where recycle facilities exist. Check with your
Local Authority or retailer for recycling advice.

POWXG4035 EN
Copyright © 2015 VARO P a g e | 8www.varo.com
17 DECLARATION OF CONFORMITY
VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that,
Product: leaf blower/ vacuum 3000W
Trade mark: POWERplus
Model: POWXG4035
is in conformity with the essential requirements and other relevant provisions of the applicable
European Directives, based on the application of European harmonized standards. Any
unauthorized modification of the apparatus voids this declaration.
European Directives (including, if applicable, their amendments);
2011/65/EU
2006/42/EC
2004/108/EC
2000/14/EC Annex V LwA 97dB / 99dB
European harmonized standards (including, if applicable, their amendments);
EN60335-1: 2012
IEC60335-2-100: 1.0: 2002
EN55014-1: 2006
EN55014-2: 1997
EN61000-3-2: 2006
EN61000-3-3: 2013
Keeper of the Technical Documentation : Philippe Vankerkhove, VARO –Vic. Van Rompuy
N.V.
The undersigned acts on behalf of the company CEO,
Philippe Vankerkhove
Regulatory Affairs –Compliance Manager
13/04/2015, Belgium