Powr-Flite PF20BP User manual

Model PF20BP
Backpack Vacuum
Save These Instructions
BP100
OPERATING INSTRUCTIONS
COMMERCIAL AND HOUSEHOLD
BACKPACK VACUUM CLEANERS
CONGRATULATIONS
YOU HAVE JUST ACQUIRED A HIGH QUALITY VACUUM
CLEANER. PLEASE READ THIS MANUAL CAREFULLY,
BEFORE OPERATING YOUR NEW VACUUM CLEANER.
KEEP MANUAL ON HAND FOR FURTHER REFERENCES.

To reduce risk of fire, electric shock, or injury:
●Do not use outdoors or on wet surfaces.
●Do not leave vacuum cleaner unattended when plugged in. Turn off
the switch and unplug the electrical cord when not in use and before
servicing.
●Do not allow to be used as a toy. Close attention is necessary when
used by or near children.
●Use only as described in this manual. Only manufacturer’s
recommended attachments.
●Do not use with damaged cord or plug. If vacuum cleaner is not
working as it should, has been dropped damaged, left outdoors, or
dropped into water, return it to a service center before using.
●Do not pull or carry by cord, use cord as a handle, close a door on
cord, or pull a cord around sharp edges or corners. Do not run
vacuum cleaner over cord. Keep cord away from heated surfaces.
●Do not use extension cords or outlets with inadequate current
carrying capacity.
●Turn off all controls before unplugging.
●Do not handle plug or vacuum cleaner with wet hands.
●Do not put any objects into openings. Do not use with any opening
blocked, keep free of dust, lint, hair, and anything that may
reduce airflow.
●This vacuum cleaner creates suction. Keep hair, loose clothing,
fingers, and all parts of body away from openings.
●Do not pick up anything that is burning or smoking, such as cigarettes,
matches or hot ashes. Do not use without dust bag in place. Use
extra care when cleaning on stairs. Do not use to pick up flammable
or combustible liquids such as gasoline, or use in areas where they
may be present.
●Store your cleaner indoors in a cool, dry area.
●Do not unplug by pulling on cord. To unplug, grasp the plug,
NOT THE CORD.
THESE MODELS ARE GROUNDED, CONNECT TO A PROPERLY
GROUNDED OUTLET ONLY - SEE GROUNDING INSTRUCTIONS.
GROUNDING INSTRUCTIONS
This appliance must be grounded. If it should malfunction or breakdown,
grounding provides a path of least resistance for electric current to
reduce the risk of shock. This appliance is equipped with a cord having
an equipment-grounding conductor and grounding plug. The plug must
be inserted into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
WARNING -Improper connection of the equipment-grounding conductor
can result in a risk of electric shock. Check with a qualified electrician or
service person if you are in doubt as to whether the outlet is properly
grounded. Do not modify the plug provided with the appliance - if it will
not fit the outlet, have a proper outlet installed by a qualified electrician.
This appliance is for use on a normal 120 volt circuit, and has a grounded
plug that looks like the plug illustrated in sketch A. A temporary adapter
that looks like the adapter illustrated in fig B and C may be used to con-
nect this plug to a 2-pole receptacle as shown in fig B if a properly
grounded outlet is not available. The temporary adapter should be used
only until a properly grounded outlet (fig A) can be installed by a qualified
electrician, The green colored rigid ear, lug, or the like extending for the
adapter must be connected to a permanent ground such as a properly
grounded outlet box cover. Whenever the adapter is used, it must be
held in place by a metal screw.
Note: In Canada, the use of a temporary adapter is not permitted by the
Canadian Electrical Code.
●Do not vacuum water or liquids.
●Do not vacuum up hard or sharp objects, as they may damage the
hose, vacuum bag or the vacuum motor.
●Do not drop the vacuum on the floor.
●Do not operate the vacuum while it is standing on high-pile carpet.
It is essential that the exhaust airflow is not restricted.
●Do not wash or launder the cloth vacuum bag. It would destroy
the filtration capacity of the fabric.
●Do not kink or twist the power cord.
●Do not attempt to service the vacuum yourself. Repair by anyone
other than an authorized repair service may void the warranty.
●Clean the cloth vacuum bag regularly.After emptying the vacuum
bag, turn it inside out and shake as much dust out of the fabric as
possible. Optimum performance is achieved by using a paper
vacuum bag with the cloth bag.
●Check the power cord for damage.
Always unwind the cable completely.
●Ensure that the vacuum hose, the extension wand and the
vacuuming accessories are not blocked.
●Ensure that the electrical outlet and the plug are securely
connected. Incorrect connections may cause sparking and damage
to the cable socket.
●Have your Backpac Vac served by an authorized repair service
if you suspect any potential problems.
●Use only approved paper vacuum bags.
●Ensure that the flexible vacuum bag ring provides a proper seal
before vacuuming.
MAINTENANCE
SAFETY PRECAUTIONS
WARNING
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
*When using an electrical back pack vacuum cleaner, basic precautions should be followed.
*Read all instructions before using vacuum cleaner.

Please read the following operating instructions carefully. They will help
you to get the best performance from this professional quality vacuum
cleaner and to maintain it in optimum condition.
Follow these simple steps for easy and effective
operation of the Backpac Vac.
Open the lid and ensure that the cloth bag is correctly located and the
flexible ring provides a proper seal when the lid is closed. For optimum
filtration and maximum hygiene, it is advisable to use a paper vacuum
bag in addition to the standard cloth bag.
If you use a paper vacuum bag, simply insert it into the cloth bag, making
sure that the cardboard disk is centered on the flexible sealing ring.
When you replace the lid, the short nozzle in the center of the lid will be
forced into the central hole of the cardboard disk of the paper vacuum
bag thus providing a tight seal. Make sure the paper vacuum bag is tight-
ly secured over the short nozzle before vacuuming.
Lock the lid down with the two latches. Please note that the lid may be
located for either right or left handed operation.Always ensure that the
vacuum bag is empty before vacuuming. Your Backpac Vac as been fit-
ted with a thermal overload switch to protect the motor against damage
should the airflow be blocked for extended periods. This may occur if the
vacuum bag is overfull or if the vacuum hose is blocked. The vacuum
motor will stop before it can get too hot. If it happens, empty and thor-
oughly clean the vacuum bag or free any blockage and ensure that ade-
quate airflow is restored. The motor will automatically restart after it has
cooled to a safe operating temperature.
1. The vacuum hose is fitted into the screw hub in the lid. It should not
be necessary to remove the hose in normal operation. If you wish to
remove the hose it may be unscrewed from the lid. To unscrew it, hold
the lid in one hand and with the other, turn the hose in a counter
clockwise direction. Torefit the hose, reverse this operation and turn
the hose in a clockwise direction.
2. Place the Backpac Vac on your back, adjust the shoulder straps until
you feel comfortable and then tighten the waist belt. The Backpac Vac
is designed to ride higher on your back for maximum comfort.
3. Plug the cord into a 110 volt, grounded outlet. Always unwind the cord
completely before vacuuming. It is important to maintain the power
cord in good condition. Use care when pulling the cord around sharp
edges and through doorways
Never operate the Backpac Vac if the power cord is
damaged in any way.
4. Attach the extension wand to the pistol grip and fit the floor tool or
any of the other vacuuming accessories on the wand.
5. Turn the vacuum on. The toggle switch is located near the bottom
of the Backpac Vac.
6. Toadjust the suction on the Backpac Vac, open the by-pass valve
on the pistol grip, regulating it until you attain the proper suction.
OPERATION INSTRUCTIONS

ref # order # description
1BP1 lid
2BP2 dust bag
3BP3 lid clamp lid clamp assembly
4BP4 body
6BP5 motor seal
11 BP7 motor cover
12 BP8 motor cover screws
13 BP9 filter pad - external
14 BP14 filter cover
15 BP27 paper dust bag
16 BP25 dusting brush
17 BP26 crevice tool
18 BP24 floor tool
19 BP13 wire loom set
20 BP22 hand piece
21 BP19 screw hub
22 BP20 clip ring
23 BP21 extension wand
24 BP18 vac hose
27 BP12 rocker switch
28 BP17 waist harness inc: webbing & clip
29 BP11 back support
30 BP10 filter pad - internal
31 BP15 frame
32 BP16 shoulder strap assembly
33 BP31 motor assembly
Model PF10BP and PF20BPParts
A Tacony Company
Ft. Worth, TX 76140
1-800-880-2193
The Powr-Flite Limited Warranty
The manufacturer warrants to the original purchaser that products manufactured are free from defects, provided such goods are
installed, operated and maintained in accordance with written manuals or other instructions for a period of 1 year from date of pur-
chase on workmanship, motor,and parts, 2 years on fan, switch, and yoke. In case you, as our customer,meet any trouble with your
machine, contact a Powr-Flite representative, who will be happy to be of service to you and will take care of any warranty issues.