Praktica Praktica User manual

Praktica, Praktica FX & Praktiflex FX User manual, year 1952
–1 –
Praktica, Praktica FX & Praktiflex FX
(technically comparable cameras)
Instruction for use, 1952.
Introduction
The PRAKTICA is a one-lens reflex camera taking the perforated 35 mm cine film. The size of the
picture is 24×36mm.
The PRAKTICA possesses all the advantages of a modern precision miniature camera, e. g. shutter
winder coupled with film advancement, lock against double and blank exposures, interchangeability of
the lenses, and adaptability tomicrophotography.
Focusing is performed by means of a light-collecting lens which produces a clear, bright image.
The PRAKTICA takes all current daylight film cartridges for 36 exposures in black-and-white and
color film. The PRAKTICA FX is sure to give perfect results and mechanical safety if the instructions
for use are closely followed and carriedout.
Explanation of signs
I. Inserting the film
The camera back is unlocked by pushing the knob No. 18 in the direction of the arrow. Open the
camera back and take it off, and pull out the rewind-knob No. 6.
The film cartridge must be placed into the empty chamber with the beginning of the film projecting
in the direction of the picture level. Pull the film from the cartridge and fix it into the empty spool on
the right-hand side of the camera.
It is of importance that the sprocket teeth catch both perforated edges of the film.
Wind the shutter by rotating the knob No. 2.
Make sure that the film lies evenly on the film guide and toothed drum, link the camera back into
the right-hand groove and close it down.
The film pressure-plate must be perfectly clean before the camera back is closed.
After having bolted the camera back, make two blank exposures. The rewind-knob (6) must hereby
turn in the opposite direction of the arrow mark.
When all these manipulations have been performed, the counting mechanism has to be set to stroke
No. 1.
The camera is now ready for the firstexposure.

Praktica, Praktica FX & Praktiflex FX User manual, year 1952
–2 –
II. Changing the film
36 exposures having been made, a certain resistance will be noticed in winding the shutter –a sign
that the whole film is exposed and has to be rewound into the cartridge.
This is done by pressing down the little button No. 13
and at the same time turning the rewind-knob No. 6 in the
direction of the arrow.
The beginning of the film will audibly slip out of the
cartridge, and the rewinding procedure is completed.
The camera back must now be opened and the exposed
film takenout.
Do not change the film in bright sunlight, but if possible
in the shade. It is advisable to deposit the film in light-tight
paper or in metal box after has been removed from the
camera.
III. Shutter and film transport
a) Winding the shutter
A full rotation of the knob No. 2 as far as it will go to the right (clockwise) winds the shutter,
advances the film to the next picture, and swings the reflex mirror into the light-ray level of the lens.
Take care that the release knob No. 1 is not pressed in while the shutter is being wound up.
b) Setting the speeds
The speeds are set by means of the adjusting knob No. 4
and the supplementary knob No. 5. The speed disc is
engraved with
black figures for the short speeds from 1/500th to 1/25th
second,with
red figures for the long speeds from 1/10th to 1/2
second, and with “B” setting for time exposures of any
desired length.

Praktica, Praktica FX & Praktiflex FX User manual, year 1952
–3 –
When set to the speeds of 1/500th to 1/25th second, the red triangle on the supplementary knob No.
5 must point towards the black triangle on the cameratop.
When set to the speeds of 1/10th to 1/2 second, the red triangle on the supplementary knob must
point to the red triangle on the cameratop.
The “B” setting can be employed in both positions.
To set the speeds, lift the outer ring No. 4, turn it to the desired number and click it in. There is only
one rest-hole for 1/2 and 1/25th second, marked by a dot between the speed numbers 1/2 and 1/25.
1 –Release knob;
2 –Knob for winding the shutter and transporting
the film;
3 –Picture-counting disc;
4 –Knob for setting the shutter speeds;
5 –Knob for setting the speedgroups;
6 –Film rewind-knob;
7 –Loops to hold the neck-strap;
8 –Interchangeable lenswith rotatable rings for
setting distance and diaphragm, and with
distance, diaphragm anddepth-of focus scales;
09 –Light-hood;
10 –Magnifying lens;
11 –Rear flap of thelight-hood;
12 –Latch button for light-hood;
13 –Release knob for rewind mechanism;
14 –Filmspool;
15 –Sprocket wheel for transporting the film;
16 –Picture level;
17 –Cameraback;
18 –Catch for camera back;
19 –Film pressure-plate
c) Releasing the shutter
The exposure is made by gently pressing in the button
No. 1. In order to avoid blurring the picture, the knob
should not be let loose until the shutter has run down.
When set at “B”, the shutter must be pressed as long as the
exposure is to last. For the use of a wire release, the knob
is provided with a thread into which the release can be
screwed. A special wire release is supplied with the
camera for long time exposures in the T-setting (e. g. in
nightphotography).

Praktica, Praktica FX & Praktiflex FX User manual, year 1952
–4 –
IV. Lens and Shutter
a) Press the button No. 12, and the light-hood will spring up, uncovering the finder lens. When the
shutter is wound up, a bright, clear picture will appear on the ground-glass surface of the finder. By
turning the distance meter ring on the lens mount, the lens is focused to the greatest possible sharpness.
Focusing should be performed with the diaphragm set to the widest aperture, and the lens stopped
down to the desired aperture immediately before making the exposure.
The camera is equipped with a magnifying lens for easier focusing. It is swung into operating
position by means of the lever No. 10.
When using the magnifying lens, a distance of 15 to 25 mm between the eye and the glass should be
observed. Only then will the image on the ground glass be perfectly clear.
The direct-vision view finder in the light-hood is very handy for sportssnapshots.
In order to disengage this finder, the flap in the front of the light-hood must be swung in,
whereupon the magnifying lens is brought into working position. In this way the flap is held level, and
the sports finder can be used.
To close the light-hood, first swing in the magnifying lens. Then push in the rear flap with the
forefinger and close down the light-hood.
b) The lens scales
The front ring on the lens mount is engraved with the
diaphragm scale and the index point, the middle ring with
the distance scale in meters or feet, and the back ring with
a diaphragm scale showing the depth-of-focus.
According to this scale, for instance, the Biotar lens f/2
with a focal length of 5,8 cm (2 1/4″), at a distance setting
of 12 ft. (4 meters) and an f/11 aperture, gives a sharpness
reaching from 7′6″to 30′(2,5 to 10 meters).

Praktica, Praktica FX & Praktiflex FX User manual, year 1952
–5 –
c) Changing the lens
The lens in the camera body is interchangeable within
its threaded flange. By being turned to the left (anti-
clockwise) the lens can be removed from the camera body.
Should the camera be loaded when the lens is being
screwed out, take care to shield the aperture from glaring
light.
d) The mirror
The mirror is a very sensitive element in the camera, and it must be protected even from the
slightest damage. It is advisable, before exchanging the lenses, to swing the mirror up. Only use a very
soft haired brush to remove any possible uncleanliness from themirror.
e) Lenses with the diaphragm-presetting device
To preset the aperture desired for the exposure, draw
the milled ring directly behind the diaphragm scale back-
ward, holding the diaphragm ring –which has before been
adjusted to the desired number –with the other hand and
setting the red index dot against the diaphragm number
chosen. The milled ring, when springing back into posi-
tion, will get coupled with the diaphragm ring. For focu-
sing, the diaphragm ring can now be set to the full aperture
and, without changing the position of the camera, turned
back until it stops at the preset diaphragm number.
V. Close-up Tubes(Macro-photography)
The lenses in the Praktica make it possible for you to
approach your object up to about 70 cm (28 in.). For expo-
sures at shorter distances you will have to use intermediate
tubes.
The table below shows the numbers and lengths of the
intermediate tubes, the distance of the object, measured
from the rim of the lens and the size of the object, also the
proportionate time of exposure.
Tube No.
Length
of Tube
Scale of
Reproduction
Distance
of Objekt
Size of Object
Proportionate
Time of
explosure
1
5,8 mm
0,23 in.
0,1 to 0,174
622 to 374 mm
249 to 15 in.
240×260 to 138×207 mm
9,6×10,4 to 5,5×8,3 in.
1,20
2
17,4 mm
0,7 in.
0,3 to 0,374
234 to 198 mm
94 to 79 in.
80×120 to 64×96 mm
3,2×4,8 to 2,56×3,84 in.
1,70
1 + 2
23,2 mm
0,93 in.
0,4 to 0,474
187 to 165 mm
75 to 66 in.
60×90 to 50×76 mm
2,4×3,6 to 2×3 in.
1,96
3
34,8 mm
1,4 in.
0,6 to 0,674
139 to 128 mm
55 to 51 in.
40×60 to 35×53 mm
1,6×2,4 to 1,4×2,1 in.
2,60
1 + 3
40,6 mm
1,6 in.
0,7 to 0,774
125 to 117 mm
50 to 47 in.
34×51 to 31×46 mm
1,36×2 to 1,24×1,84 in.
2,90
2 + 3
52,2 mm
2,09 in.
0,9 to 0,974
107 to 103 mm
43 to 41 in.
26×40 to 24×36 mm
1,04×1,6 to 0,96×1,44 in.
3,60
1 + 2 + 3
58,0 mm
2,3 in.
1,0 to 10,74
100 to 96 mm
40 to 38 in.
24×36 to 22×33 mm
0,96×1,44 to 0,88×1,32 in.
4,00

Praktica, Praktica FX & Praktiflex FX User manual, year 1952
–6 –
VI. The Prismatic Finder
A Prismatic Finder is available as an accessory to the
Praktica. At eye-level, this finder gives a ground glass view
of the image –upright, correct-sided, and free from
parallax error.
The Prismatic Finder is attached to the top of the camera
light-hood by fixing the nose marked “N”into the spring
catch (12) of the light hood (9) and pushing the two spring
tacks marked “S” underneath the light hood cover (9).
VII. Electronic and Regular FlashConnection
On the front of the camera are three contact sockets. The socket marked “X” takes electronic
flashes, whereas the “F” mark is for regular flashsynchronization.
a) Electronic flashes (Xsynchronization)
To be employed for all kinds of electronic devices acting without delay.
Synchronization allows for exposures up to 1/50 th second.
b) Flash guns (F synchronization)
When using suitable flash guns, shutter speeds up to
1/500th second can be synchronized.
The central socket is the mass contact for both flash and
strobe.
The following chart gives the shortest shutter speeds in
connection with the most popular flash lamps.
The flash bulb must never be put into the flash unit
before the shutter has been wound up.
Manufacturers
Type of Lamp
F-Contact
Speed
Guide Number
X-Contact
Speed
Guide Number
Osram
S 0000
1/50
40
1/10
056
S 1000
1/200
28
1/10
070
S 2000
1/100
65
1/10
100
Philips
PF 300
---
---
1/10
020
PF 140
(1/200)
28
1/10
048
PF 240
1/25
48
---
---
PF 250
(1/500)
28
1/10
056
PF 450
1/25
80
1/10
088
PF 560
1/200
32
1/10
080
PF 110
1/50
38
1/10
110
Gen.-Elektrik
SM000
---
---
1/25
---
No. 50
(1/200)
---
1/10
---
No. 60
1/50
---
1/10
---

Praktica, Praktica FX & Praktiflex FX User manual, year 1952
–7 –
No. 11
(1/200)
---
1/10
---
No. 22
(1/500)
---
1/10
---
No. 31
1/10
---
1/10
---
No. 50
1/50
---
1/10
---
Sylvania
Press 40
(1/200)
---
1/10
The guide
number is the
product out of
the distance
and diaphragm
numbers.
No. 00
1/500
---
1/25
No. 25
(1/500)
---
1/25
SF000
---
---
1/25
FP 260
1/50
---
1/10
The figures in parentheses signify that synchronization is possible, but that a certain diminution of
light on one, or both, of the narrow edges of the film has to be taken into account. This is caused by the
differences existing in the ignition and pre-ignitiontimes.
http://eugigufo.net/download/photovideo/