PreCise Biometrics Tactivo Product information sheet

TACTIVO™
for:
• iPad
• iPad mini
• iPad mini with Retina display
• iPad Air
User Reference Guide
Guardian Case for Tactivo for
iPad, iPad mini and iPad Air

Trademarks: Tactivo™ and PRECISE BIOMETRICS™
Design: pending and registered in EU and USA
Patent: patents pending in EU and USA
©Precise Biometrics 2012-2014

INDEX
1. Introduction
2. General Information
3. System Requirements
4. Card Reader
5. Installation
6. Maintenance
7. Synchronizing & Charging
8. Apps for Tactivo
9. Electromagnetic Compatibility
10. Environment

1. Introduction
Tactivo™ for iPad, iPad mini and iPad Air are smart card readers that makes
strong authentication easy and convenient using a smart card.
The Guardian Case for Tactivo for iPad is a rubber case that can be used
together with Tactivo and iPad, iPad mini and iPad Air. The Guardian Case is
sold separately.
For more information on Tactivo and available apps, please visit us at
www.precisebiometrics.com.
2. General Information
Tactivo should only be used with iPad, iPad mini and iPad Air. Tactivo adds
smart card functionality and should not be used for any other purpose.
Although Tactivo covers a major physical part of the iPad mini and iPad Air,
it should not be considered a protective case.
The Guardian Case for Tactivo for iPad is a rubber case that can be used
together with Tactivo for iPad, iPad mini and iPad Air. It oers an extra layer
of ruggedized protection for the Tactivo and iPad.
Do not allow Tactivo to get in contact with water or other uids. If this
happens immediately remove Tactivo from the device and let it dry
thoroughly. Do not dry Tactivo using any external sources, such as hair
dryers and microwave ovens.
Tactivo is designed to work in the temperature range 32-95°F (0-35°C) and
can be stored in the range -4-113°F (-20-45°C )
Handling of Tactivo is the user’s responsibility and any action that can
damage the product is the user’s own responsibility. Do not paint, drop or
disassemble Tactivo and do not put it in places or in devices where it can be
damaged such as in a clothes dryer.

Tactivo may contain small parts which may present a choking hazard for
small children. Keep such parts away from small children.
3. System Requirements
Usage of Tactivo requires an iPad, iPad mini, iPad mini with Retina display,
or iPad Air. Find supported iOS versions at:
www.precisebiometrics.com/supported-ios-versions.
4. Card Reader
The card reader in Tactivo supports ISO 7816-4 compatible smart cards
including US credentials PIV, PIV-I, TWIC and CAC. Embossed cards are also
supported. Do not use the card reader for other cards or for storage of
other things such as business cards.

5. Installation
1. Connect the
iPad to the Tactivo
using the bullt-in
connector.
2. Snap the top of
the cover in place.
3. Slide in the smart
card with the chip
side facing away
from you
4. To remove, gently
separate the top of
the Tactivo from the
iPad then disconnect
Tactivo for iPad, iPad mini and iPad Air
Guardian Case
The Guardian Case for
Tactivo can only be used in
combiniation with Tactivo
when the iPad, iPad mini
or iPad Air is fully inserted.
Guardian Case for Tactivo
cannot be used in combination
with the Smart Cover from
Apple.

6. Maintenance
Protect Tactivo™ from any kind of physical damage. Tactivo should not
be considered as a protective case for your iPad.
Do not use paper tissues for cleaning purposes as they may scratch the
surface.
Do not spray cleaner directly onto the device.
Do not use chlorine-based cleaners, non-chlorine bleach, or chlorine-
based bathroom or mildew cleaners.
Do not use any solvents, such as acetone, paint thinners, turpentine, etc.
We encourage all Tactivo users to always use the latest rmware for best
user experience.

7. Charging & Synchronizing
Your iPad, iPad mini and iPad Air can be charged through a wall outlet using
an AC adapter and micro USB cable without disconnecting your Tactivo from
the device.
Your iPad, iPad mini or iPad Air can be synchronized using Wi-Fi
communication. If you want to use a cable for synchronization, Tactivo
needs to be disconnected from your iPad rst.
Tactivo should be used exclusively with supported iPad models. Do not
connect it to any other device.
Do not bend or twist the micro USB cable while connected to Tactivo.
Only use approved iPad, iPad mini and iPad Air chargers.
Do not attempt to use the Lightning connector-based docking stations
without removing Tactivo from the device.
Never force a connector into a port. This might damage the product.
8. Apps for Tactivo
The use of apps for Tactivo is entirely at the user’s sole risk. Precise Biometrics
has no liability whatsoever and disclaims all responsibility for the usage of
apps for Tactivo.

9. Elecromagnetic Compatibility
Electromagnetic compatibility (EMC) is the ability of electronic equipment to
function properly together in the electronic environment.
CE Notice (Europe)
Tactivo meets the following technical standards:
• EN 301 489-1:2011 • EN 61000-4-2:2008
• EN 55022:2006 – A1:2007 • EN 61000-4-3:2006 – A1:2008
FCC Information (USA)
Tactivo for iPad mini (P/N SAA 133 1009) and Tactivo for iPad/iPadAir (P/N SAA 130
1000) comply with Part 15 (Class B) of the FCC Rules . Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
CONTACT: Precise Biometrics AB, Mobilvägen 10, Lund, 223 62, Sweden.
Precise Biometrics Inc., Potsdam, New York, USA.

10. Environment
RoHS compliant
WEEE compliant
Tactivo for iPad, iPad mini and iPad Air should be recycled as electrical
waste.
Guardian Case for Tactivo for iPad, iPad mini and iPad Air is classied as
combustible waste (energy recycling).
iPad, Retina and Smart Cover are trademarks of Apple Inc., registered in the U.S. and other countries.
iPad Air, iPad mini, Made for iPad and Lightning are trademarks of Apple Inc.
ASP 140 1002 – 4160/7 RA