PreCise TACTIVO Product information sheet

TACTIVO™
for:
• iPhone 6
User Reference Guide

INDEX
1. Introduction
2. General Information
3. System Requirements
4. Card Reader
5. Installation
6. Maintenance
7. Synchronizing & Charging
8. Apps for Tactivo
9. Electromagnetic Compatibility
10. Environment
Trademarks: Tactivo™ and PRECISE BIOMETRICS™
Design: pending and registered in EU and USA
Patent: patents pending in EU and USA
©Precise Biometrics 2012-2015

1. Introduction
Tactivo™ for iPhone 6 is a smart card reader that makes strong
authentication easy and convenient using a smart card.
For more information on Tactivo and available apps, please visit us at
precisebiometrics.com.
2. General Information
Tactivo should only be used with iPhone 6. Tactivo adds smart card
functionality and should not be used for any other purpose. Although
Tactivo covers a major physical part of the iPhone 6, it should not be
considered a protective case.
Do not allow Tactivo to get in contact with water or other uids. If this
happens immediately remove Tactivo from the device and let it dry
thoroughly. Do not dry Tactivo using any external sources, such as hair
dryers and microwave ovens.
Tactivo is designed to work in the temperature range 32-95°F (0-35°C) and
can be stored in the range -4-113°F (-20-45°C )
Handling of Tactivo is the user’s responsibility and any action that can
damage the product is the user’s own responsibility. Do not paint, drop or
disassemble Tactivo and do not put it in places or in devices where it can be
damaged such as in a clothes dryer.
Tactivo may contain small parts which may present a choking hazard for
small children. Keep such parts away from small children.
3. System Requirements
Usage of Tactivo requires an iPhone 6. Find supported iOS versions at:
http://precisebiometrics.com/supported-ios-versions.
4. Card Reader
The card reader in Tactivo supports ISO 7816-4 compatible smart cards
including US credentials PIV, PIV-I, TWIC and CAC. Embossed cards are also
supported. Do not use the card reader for other cards or for storage of
other things such as business cards.

5. Installation
Tactivo for iPhone 6
1. Connect the
iPhone to the Tactivo
using the bullt-in
connector.
2. Snap the top of
the cover in place.
3. Slide in the smart
card with the chip
side facing towards
you
4. To remove, gently
separate the top of
the Tactivo from the
iPhone and then
disconnect
6. Maintenance
Protect Tactivo™ from any kind of physical damage. Tactivo should not
be considered as a protective case for your iPhone.
Do not use paper tissues for cleaning purposes as they may scratch the
surface.
Do not spray cleaner directly onto the device.
Do not use chlorine-based cleaners, non-chlorine bleach, or chlorine-
based bathroom or mildew cleaners.
Do not use any solvents, such as acetone, paint thinners, turpentine, etc.
Tactivo as Desktop Reader
In addition to using it for authentication on mobile devices, Tactivo can be connect-
ed to stationary and laptop devices running on Windows/OS X for secure authentica-
tion using the smart card.
1. Remove the mobile device from the Tactivo.
2. Connect the Tactivo to the Windows or OS X device using the micro-USB to USB
cable included with the Tactivo.
3. Windows devices install drivers automatically.
OS X devices may need altered CCID settings to run.
Instruction for OS X devices available on www.precisebiometrics.com

9. Elecromagnetic Compatibility
Electromagnetic compatibility (EMC) is the ability of electronic equipment to
function properly together in the electronic environment.
CE Notice (Europe)
Tactivo meets the following technical standards:
• EN 301 489-1:2011 • EN 61000-4-2:2008
• EN 55022:2006 – A1:2007 • EN 61000-4-3:2006 – A1:2008
FCC Information (USA)
Tactivo for iPhone 6 (P/N SAA 140 1004) comply with Part 15 (Class B) of the FCC
Rules . Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
CONTACT: Precise Biometrics AB, Scheelevagen 30, Lund, 220 07, Sweden.
7. Charging & Synchronizing
Your iPhone can be charged through a wall outlet using an AC adapter and
micro USB cable without disconnecting your Tactivo from the device.
Your iPhone can be synchronized using Wi-Fi communication. If you want to
use a cable for synchronization, Tactivo needs to be disconnected from your
iPhone rst.
Tactivo should be used exclusively with supported iPhone models. Do not
connect it to any other device.
Do not bend or twist the micro USB cable while connected to Tactivo.
Only use approved iPhone chargers.
Do not attempt to use the Lightning connector-based docking stations
without removing Tactivo from the device.
Never force a connector into a port. This might damage the product.
8. Apps for Tactivo
The use of apps for Tactivo is entirely at the user’s sole risk. Precise Biometrics
has no liability whatsoever and disclaims all responsibility for the usage of
apps for Tactivo.

10. Environment
RoHS compliant
WEEE compliant
Tactivo for iPhone 6 should be recycled as electrical waste.
iPhone is a trademark of Apple Inc., registered in the U.S. and other countries. iPhone 6, Made for
iPhone and Lightning are trademarks of Apple Inc.
ASP 140 1002 – 4160/7 RA