Precision Products SB4300RD User manual

Parts
No
2564B
2564G
2886
2887
2887G
2888B
2888GY
2554
2889G
2890
2546B
2546G
2892B
2892G
2441
2614
Description
Axle - 1/2” x 17” (Black)
Axle - 1/2” x 17” (Gray)
Hopper
Leg Stand (Black)
Leg Stand (Gray)
Handle (Black)
Handle (Gray)
Handle Cover
Gear Case
Wheel
Cross Brace (Black)
Cross Brace (Gray)
Hopper Support (Black)
Hopper Support (Gray)
Cable Control
Spinner Disc
Qty
1
1
1
1
1
1
2
1
2
1
1
No
1868
1660
1042
1060
1040R
1842
1270
2828
1053
Parts Description
1/4” x 2-1/4” Carriage Bolt
1/4” x 1-1/4” Hex Head Bolt
Hitch Pin Clip
Split Spacer
Hub Cap
Split Bushing
1/4” Hex Head Nut
Wing Nut
7/8” Tube Plug
Qty
7
2
1
2
2
2
6
3
2
SB4300RD & SB4300RDGY BROADCAST SPREADERS
Parts List and Instructions
06/05
MADE IN
USA
3845
12
3
4
5
67
8
9
10
11
12 13 14 15 16
17
18 19 20
Ref
No
12
13
14
15
16
17
18
19
20
Retain for future reference
TIP: Many of these hardware parts can
be purchased at your local hard
CUSTOMER SUPPORT
At Precision Products, Inc. delivering quality, value and outstanding service is our goal. However, sometimes parts do
become damaged or lost during transport from our facilities to the store. If you have any problems, please do not return
this merchandise to the store. Call us and we will take care of any problem you may have with this unit.
Phone [phone] Ext. 204
HOW TO ORDER
REPLACEMENT PARTS:
When ordering parts always
give model number, part
number and part description.
Send To: Parts Division
316 Limit Street
Lincoln, IL 62656
Phone [phone]
[phone] Ext. 204
FAX [phone]
www.precisionprodinc.com
PRECISION PRODUCTS, INC.
This unit is warranted against defects in materials and workmanship to the original
purchaser, under normal use and service, for a period of ninety (90) days from date
of sale. During the Warranty Period, we will repair or replace at our option free of
charge to the original purchaser, any part of the Unit that our examination shows to
be defective in workmanship or materials. This Warranty Does Not apply to
damage caused by misuse, abuse, neglect, accident, normal wear, or alterations by
unauthorized persons.
LIMITED WARRANTY
Ref
No
1
**
2
3
**
4
**
5
6
7
8
**
9
**
10
11
Parts referenced with ** have two color options.

SB4300RD & SB4300RDGY Broadcast Spreader
USING YOUR SPREADER
CAUTION:
CARE MUST BE TAKEN WITH ANY WEED
KILLER, PESTICIDE, OR COMBINATION
PRODUCT.
THEY CAN BE HARMFUL TO OTHER PLANT
LIFE IN THE YARD.
STEP 1
Un-fold Handle
and tighten Wing
Nuts.
FOR STORAGE
Loosen the two Wing
Nuts and fold handle
under hopper.
Wing Nuts
Handle
Wing Nuts
Handle
MAINTENANCE INSTRUCTIONS
Control Lever
Calibration Indicator Button
Setting Numbers
USING YOUR SPREADER
Settings are made by pressing down on the Calibration
Indicator button and setting to desired number on the
Control Cable Assembly.
See Application chart for setting information.
* TO OPEN - Push the Control Lever forward until it stops against button.
* TO CLOSE - Pull the Control Lever fully back toward Operator.
AFTER EACH USE: Wash unit
thoroughly let dry. Lubricate
moving parts, including slide
plate, axle and upright shaft.