Precor Bicycle-mounted Child Seat C842 Installation and operating instructions

This addendum accompanies the C842 or C846 Owner’s Manual
anddescribesthechangesthathaveoccurredwiththeintroduction
of the C846i product.
On the C846i, newlabelsappear onthe display,but donot change
the functionality of the unit. The owner’s manual uses the words
courseand courseselection, while thelabels displayprograms and
program selection. To lessen confusion, please remember that
wherever you come across the word “course” in the owner’s
manual, you need to replace it with the word “program.”
OPTIONAL POWER ADAPTER
With the C842 or C846i product, if you choose to purchase the
optionalpoweradapter,youmustalsopurchasetheinternalcable
kit. This kit supplies a cable, bracket and fasteners that allow the
power adapter to connect to the lower electronics board.
CAUTION: The internal cable kit requires installation by an
authorized service person. Do not attempt installation on
your own as you could void the Precor limited warranty.
If you need assistance, please see Obtaining Service in your
owner’s manual.
SEAT ADJUSTMENT
On the C846i and C842, you can adjust the seat tilt by taking the
following steps:
1. Loosen the nut beneath the seat using a 17 mm (¹¹⁄₁₆-inch)
box-end wrench or crescent wrench. Refer to Diagram 1.
Diagram 1
Loosen nut to
adjust seat tilt.
P/N 47563-101
February 27, 2004
Seat
Nut
Wrench
Seat Post
C842
C846
i
Owner’s Manual Addendum

2. Adjust the seat’s tilt (forward or back). See Diagram 2.
3. Wrench tighten the nut.
4. Applypressuretotheseattomakesurethatitdoesn’tmove.
Readjust and retighten the nut, if necessary.
Diagram 2
Tilt the seat
forward or
backward.
Seat adjustment
Seat Post
Nut