PREMIER POLYSTEEL 971-103 User manual

53 3/4"
31 1/4"
27 3/4"
17"
X.01
971-103
4' Grand Contour Laser Bench, Free Standing
SHEET 1 OF 2 REV.
A
SIZE

1
3
6
7
5
2
4
Drill plastic out of the mounting holes on the seat, braces and stands using a 7/16” dia. drill bit. 1.
Fasten the seat to the stands loosely, then attach the braces to the seat and stands loosely. 2.
Make sure stands, seat and braces are aligned, then tighten all of the bolts. 3.
Position bench where desired and mount to surface if desired. 4.
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 733-013 Grand Contour Free Standing Bench Stand 2
2 625-004 4' Grand Contour Laser Bench 1
3 631-313 Brace for FS Bench 2
4 516-058 3/8"x1-1/2" SS Hex Bolt 4
5 516-033 3/8"x4" SS Button Head Cap Screw 4
6 516-023 3/8" SS Flat Washer 16
7 516-028 3/8" SS Nylock Nut 8
X.01
971-103
4' Grand Contour Laser Bench, Free Standing
SHEET 2 OF 2 REV.
A
SIZE
In Accordance to California law: WARNING This product contains a chemical know to the State of
California to cause cancer and birth defects or other reproductive harm.

53 3/4"
27 1/2"
1
2
3
5
31"
16 1/2"
4
4
5
6
7
Drill plastic out of the mounting holes on the seat, braces and stands using a 7/16” dia. drill bit. 1.
Fasten the seat to the stands loosely and then fasten the brace to the stands and seat. 2.
Make sure the bench is level and tighten all the bolts. 3.
Position bench where desired and anchor to the floor. 4.
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 733-013 Grand Contour Free Standing Bench Stand 2
2 623-014 4' Grand Contour Expanded Metal Seat 1
3 631-313 Brace for FS Bench 2
4 516-058 3/8"x1-1/2" SS Hex Bolt 4
5 516-033 3/8"x4" SS Button Head Cap Screw 4
6 516-023 3/8" SS Flat Washer 16
7 516-028 3/8" SS Nylock Nut 8
X.01
974-103
4' Grand Contour Bench, Free Standing Expanded Metal
SHEET 1 OF 1 REV.
A
SIZE
In Accordance to California law: WARNING This product contains a chemical know to the State of
California to cause cancer and birth defects or other reproductive harm.

Part No. Description Qty.
623-004 4’ Grand Contour Seat 1
733-013 Grand Contour Stand 2
631-313 Brace 2
516-033 3/8”x4” SS Button Socket Cap 4
516-058 3/8” X 1-1/2” SS Hex Bolt 4
516-028 3/8” SS Nylock Nuts 8
516-023 3/8” SS Flat Washer 16
939-103
1Drill plastic out of the mounting holes on the seat, braces and stands using a 7/16” dia. drill bit.
2Fasten the seat to the stands, then attach the braces to the seat and stands.
3Make sure stands, seat and braces are aligned, then tighten all of the bolts.
4Position bench where desired and mount to surface.
501
2
17
23
Periodic check of bolt tightness is recommended.
In Accordance to California law: WARNING This product contains a chemical know to the State of
California to cause cancer and birth defects or other reproductive harm.