PREMIER POLYSTEEL Champion 924-301 User manual

6'
30"
20"
3
4
2
1
30"
10" 10"
68 1/2"
2
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 642-013 6' Champion Table Top (QS) 1
2 634-010 Free Standing Table Stand For Seats 2
3 622-013 6' Champion Seat/Back (QS) 2
4 634-013A Table Brace 2
5 516-058 3/8"x1-1/2" SS Hex Bolt 16
6 516-023 3/8" SS Flat Washer 32
7 516-028 3/8" SS Nylock Nut 16
X.01
924-301
6' Champion Expanded Metal Free Standing Picnic Table
SHEET 1 OF 2 REV.
A
SIZE

2
3
1
3
4
Periodic check of bolts tightness reccommended
Drill out all holes using a 7/16" diameter drill bit. 1.
Place the tabletop upside down on top of a pair of sawhorses or 12” blocks (cover the 2.
blocks with cardboard).
Attach both stands to the inside of table support bar. (See diagram above). Do not 3.
tighten completely.
Turn the table over. 4.
Attach the seats to the stands. 5.
Attach the straight end of each brace to the table. (See diagram above) 6.
Attach bent end of both braces to the cross bar of each stand. (See diagram above) 7.
Level the seats and table then tighten up bolts. 8.
Tools List
7/16" Drill bit •
9/16" Socket •
9/16" Wrench •
Level •
Imapct Gun (Optional) •
Drill •
X.01
924-301
6' Champion Expanded Metal Free Standing Picnic Table
SHEET 2 OF 2 REV.
A
SIZE
In accordance to California law: WARNING - This product contains a chemical known to the State of
California to cause cancer and birth defects or other reproductive harm.