PREMIER POLYSTEEL 908-D81 User manual

R30"
27"
X.01
908-D81
Premier Polysteel Deck Table, 30" Dia. Expanded Metal Top
SHEET 1 OF 2 REV.
A
SIZE

2
3
5
6
1
4
5
65
Assemble the table upside down. Protect the Table top from scratches by placing cardboard 1.
between it and the concrete floor.
Drill out holes in the Table Top, Legs and Leg Brace using a 7/16" dia. drill bit. 2.
Attach the legs to the Table Top with a bolt, 2 washers & locknut.
Do not tighten the bolts 3.
and locknuts at this time.
Attach the Leg Brace with flat top towards the Table Top. Use a locknut and washer on each 4.
threaded stud.
Do not tighten at this time.
Set table upright on a level surface and tighten all the hardware. Make sure that the Table 5.
Top is level as you tighten the hardware.
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 642-B30 30" Expanded Table Top 1
2 634-511 Patio Table Leg 4
3 634-542 Leg Brace 1
4 516-058 3/8"x1-1/2" SS Hex Bolt 8
5 516-023 3/8" SS Flat Washer 20
6 516-028 3/8" SS Nylock Nut 12
X.01
908-D81
Premier Polysteel Deck Table, 30" Dia. Expanded Metal Top
SHEET 2 OF 2 REV.
A
SIZE
In accordance to California law: WARNING - This product contains a chemical known to the State of
California to cause cancer and birth defects or other reproductive harm.
Periodic check of bolt tightness recommended.

1
1
2
3
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 642-B35 30" Round Laser Table Top 1
2 634-511 Patio Table Leg 4
3 634-543 Leg Brace 1
4 516-058 3/8"x1-1/2" SS Hex Bolt 8
5 516-023 3/8" SS Flat Washer 20
6 516-028 3/8" SS Nylock Nut 12
X.01
958-d81
30" Laser Patio Table
SHEET 1 OF 1 REV.
A
SIZE
In accordance to California law: WARNING - This product contains a chemical known to the State of
California to cause cancer and birth defects or other reproductive harm.
Periodic checking of bolt tightness is recommended.