Premier Tech 6 / 64 Solido SMART
DOKK5110E 15.04.2020
Table of Contents
1. About this document.....................................................................................................8
1.1 Scope......................................................................................................................8
1.2 Symbols used..........................................................................................................9
1.3 List of abbreviations used......................................................................................10
2. Intended use................................................................................................................10
3. Safety instructions......................................................................................................11
4. Description of functions .............................................................................................13
4.1 Component overview in round tank BL ..................................................................13
4.2 Component overview in rectangular tank M2.........................................................14
4.3 General..................................................................................................................15
4.4 Treatment process with the Solido SMART............................................................15
5. Operating notes...........................................................................................................19
5.1 Everyday conduct..................................................................................................19
5.2 General recommendations.....................................................................................21
5.3 Daily function check...............................................................................................22
5.4 Monthly in-house inspection (as per German law) .................................................22
5.5 Half-yearly maintenance (as per German law).......................................................22
5.6 Other maintenance recommendations ...................................................................22
5.7 Important documents for operation and maintenance ............................................22
6. Inspection, maintenance and desludging..................................................................23
6.1 Opening and closing the TopCover........................................................................23
6.2 Monthly in-house inspection...................................................................................24
6.3 Half-yearly maintenance........................................................................................25
6.4 Take sample of activated sludge from reactor chamber.........................................27
6.5 Evaluation of sludge level SSV90norm and recommendation for desludging.........28
6.6 Desludging.............................................................................................................30
7. Installation and start-up..............................................................................................31
7.1 Checking the system components for completeness..............................................31
7.2 Checklist BEFORE assembling the Solido SMART treatment system....................35
7.3 Assembly steps for the Solido SMART treatment system ......................................36
7.3.1 Installing the shaft assembly set ......................................................................36
7.3.2 Filling up the lifter with water............................................................................36
7.3.3 Assembling the tube diffuser............................................................................36
7.3.4 Connecting the air inlet supports......................................................................37
7.3.5 Laying the control cable...................................................................................37
7.3.6 Connecting the technology capsule .................................................................38
7.3.7 Inserting the technology capsule......................................................................38
7.3.8 Notes for plants with pumped outlet KWP (option)...........................................38