premiere XH-1001 User manual

Tissue Floating Bath
Model XH-1001
Operating Manual
Before using this product, please read this manual carefully to learn about the available
features to obtain the best results of this equipment.
Warning:To prevent fire or shock hazard, do not expose this unit to rain or moisture. Unless
labeled otherwise, this equipment should be used with AC 110V, 60Hz in the USA or Canada.
220V, 50Hz available as Model No. XH-1001-220
Caution: No user-serviceable parts inside. Refer servicing to qualified service personnel.

1
1.1 Table of Contents
Section
•Table of Contents Page 1
•Safety Page 2
•Contents/Accessories Page 3
•Specifications Page 4
•Notes of Operation/Control Panel Page 5
•Setup/Operations Page 6
•Warranty Page 7

2
2.1 Safety
Before using the Tissue Floating Bath, please read this instruction manual carefully.
Incorrect or inappropriate use may result in equipment damage or personal injury!
This Tissue Floating Bath is designed for floating paraffin sections along with assisting in
placing the paraffin section on a slide and helping the section dry. The sole purpose of this
Tissue Floating Bath is for histology use along with research, instruction, and experiments in
the universities and technical secondary schools. The Tissue Floating Bath is not
recommended for any other uses than the ones described in this manual.
When the Tissue Floating Bath is running (unit is heating), Please keep an area of about 12
inches around the Tissue Floating Bath clear while operating it.
To avoid injury to personnel; do not use the following materials in the Tissue Floating Bath:
•Flammable and explosive materials
•Strong chemical materials
•Toxic or radioactive materials

3
3.1 Contents
Number
Name
Qty
Note
1
Tissue Floating Bath With Glass Lid
1set
2
AC Power Cord
1pc
3
Thermometer Holder
1pc
4
Fuse
1pc
10 AMP
5
Operating manual
1pc
Upon receipt, please examine the package, if there's anything wrong, please
kindly contact your dealer promptly.
3.2 Accessories
If you need optional auxiliary parts, please contact our company or authorized dealers.
Name Use
Thermometer Holder Attach holder with three holes facing inside
of heating bowl. Place lab thermometer (not
included) through three holes into the water;
try to avoid thermometer making contact
with or resting on the bottom of the bowl
for most accurate reading of actual water
temperature.

4
4.1 Specifications
Function/ Parameter Technical Data
Environment of use
•Clean, dry and flat surface
•Stable work surface
•Altitude: ≤2000m
•Relative humidity:≤80%
Temperature Range •Room temperature to 75°C~±1°C
Applicable Voltage •AC110V 60HZ
Power •400 Watt
Maximum capacity •0.6 gallon (2.3 L)
Dimensions (machine) •11½ x 10¾ x 4 in. (29½ x 27 x 10 cm.)
Net Weight •5 lbs.
Dimensions (package) •13⅛x 13 x 7 in. (33 x 33 x 17.5 cm.)
Gross Weight •8 lbs.