PRESONUS Quantum2626 User manual

Quantum 2626
Quantum 26x26Thunderbolt™3Audio Interface
Quantum 26x26 Thunderbolt™3音频接口
Owner’s Manual 用户手册
®
www.presonus.com
English

1 Overview 概述 —1
2 Hookup 连接 —4
3 ConnectingtoaComputer 连接
到计算机 —8
4 UCSurfaceControlSoftware
UCSurface 控制软件 —
11
TableofContents 目录内容
1.1
Introduction 简介 — 1
1.2 Companion Products 配套产品 —2
1.3 Studio One Artist Features Studio OneArtist 功
能 —2
1.4 What is in the Box 包装里有什么 —3
2.1 FrontPanelConnectionsandControls
前面板的连接和控制 —4
2.2 Back Panel Connections 后面板的连接 —5
2.3 Quantum Hookup Diagram
Quantum 连接图 —7
3.1
InstallationforWindowsandmacOS
系统安装 —8
3.2
UsingaQuantum 2626 Interface with
PopularAudioApplications
使用 Quantum 2626 接口与流行的音
频应用程序 —9
4.1 UC Surface Launch Window 启动窗口 —12
4.2
ADAT Inputs 输入 —12
4.3 MIDI Control 控制 —12
4.4
RTA — 13
5 Aggregating Devices— 15
5.1 macOS 系统 — 15
5.2 Windows 系统 —18
6 StudioOneArtistQuickStart
快速入门 —20
6.1
Installation and Authorization 安装与授权 —20
6.2 Setting Up Studio One 设置 Studio One— 21
6.2.1 Configuring Audio Devices
配置音频装置—22
6.2.2
Configuring MIDI Devices
配置 MIDI 装置—22
6.3 Creating a New Song — 26
6.3.1
Configuring Your I/O 配置你的 I/O —26
6.3.2
Creating Audio and MIDITracks
创建音频与 MIDI 音轨 —28
6.3.3
Recording an Audio Track 录制一个音轨 —29
6.3.4 Adding VirtualInstruments
and Effects
添加虚拟乐器与效果器
—29
6.4 Monitor Mixing in Studio One
Studio One 监听混音 —31
6.4.1
Cue Mix Functions Cue Mix 功能 —31
6.4.2
Punching In （开始录音） — 32
7Technical Information
技术信息 —34
7.1 Specifications 规格 — 34

1
Overview
Quantum 2626
1
1Overview 概述
1.1 Introduction 简介
1.1 Introduction Owner’sManual
Thankyou for purchasing a PreSonus Quantum 2626 Thunderbolt 3 Audio
Interface. PreSonusAudioElectronics has designed the Quantum 2626 series
interface utilizing high-grade components to ensure optimum performance
that will last a lifetime. Loaded with high-headroom, Class A XMAX™
microphone preamplifiers; an ultra-lowlatency Thunderbolt 3 recording and
playback engine; and more,Quantum 2626 breaksnew boundaries for musical
performances and productions. All you need is a computer with a Thunderbolt
3-compatible connection, a few microphones and cables,powered speakers,
and your creativity, and you’reready to record, mix, and release your music.
感谢你 购买
PreSonus Quantum 2626 Thunderbolt 3
音频接口。
PreSonus
Audio Electronics
公司设计的
Quantum 2626
系列接口，采用了高等级的
组件，以确保最佳的性能，将持续一生。 Quantum 2626 装载了高净
空、 A 类 XMAX™ 麦克风前置放大器；超低延迟的 Thunderbolt 3 录音和
回放引擎等，突破音乐表演和制作的新界限。你只需要一台与
Thunderbolt 3
兼容的电脑，麦克风和电缆，有源音箱，加上你的创造
力，这样就可以开始录制、混音和发布你的音乐。
We encourage you to contact us with questions or comments regarding
your PreSonus Quantum 2626 interface. PreSonus Audio Electronics is
committed to constant product improvement, and we highly value your
suggestions.We believe the best way to achieve our goal of constant product
improvement is by listening to the real experts: our valued customers. We
appreciate the support you have shown us through the purchase of this
product and are confident that you will enjoy your Quantum 2626!
我们鼓励你联系我们，就 PreSonus Quantum 2626 接口提出问题或意
见。 PreSonus Audio Electronics 公司致力于不断改进产品，我们高度
重视你的建议。我们相信，实现我们不断改进产品目标的最好方法
是倾听真正专家的意见：我们宝贵的客户。我们感谢你通过购买该
产品对我们的支持，并相信你会喜欢上你的 Quantum 2626!
About this manual: We suggest that you use this manual to familiarize
yourself with the features, applications, and correct connection procedures
for your Quantum 2626 interface before trying to connect it to your computer.
This will help you avoid problems during installation and setup.
关于本手册：我们建议，你的Quantum 2626接口连接计算机之前，请使用
本手册熟悉它的功能、应用和正确的连接程序。这将有助于你在安装和设
置过程中避免问题。
Throughout this manual you will find Power User Tips that can quickly
make you a Quantum 2626 expert. In addition to the PowerUser Tips, you will
find an assortment of tutorials throughout this manual. These tutorials are
designed to help you get the most out of your Quantum 2626 and its suite of
companion software.
在这本手册中，你将会发现一些 Power User Tips 用户提示，这些提示可
以使你迅速成为 Quantum 2626 的专家。你还可以获得各种各样的教程。
这些教程是帮助你可以充分利用你的Quantum 2626及其配套软件套件。

2
1
Overview
Quantum 2626
1.2 Companion Products 配套产品
1.3 Studio One Artist Features Studio One Artist 功能
1.2 CompanionProducts Owner’s Manual
Thanksforchoosing PreSonus! As asolutions company, we believe the best wayto
take care of our customers (that’s you) is to ensure that you have the best possible
experiencefrom the beginning of your signal chain to the end.Toachieve this goal,
we’ve prioritized seamless integration throughout every design phase of these
products from day one.The result is systems that communicate with each other
as intended—straight out of the box—without excessive configuration hassles.
We’re here for you. Find out more at www.presonus.com.
感谢你选择 PreSonus! 作我们为一家解决方案公司，相信照顾客户（也就
是你）的最佳方式是确保客户从信号链的起点到终点都能获得最佳体验。
为了实现这一目标，我们从第一天起就把无缝集成放在这些产品的每个设
计阶段。其结果是，系统可以按照预期的方式相互通信--开箱即用--而没
有过多的配置麻烦。
我们就在这里。了解更多信息，请访问 官方网站 www.presonus.com 。
All PreSonus audio interfaces include PreSonus Studio One Artist recording
software, which comes with more than 4 GB of plug-ins, loops, and samples,
giving you everything you need for music recording and production. The Quick
Start Guide in Section 5 of this manual will help you configure your Quantum
2626 and provide you with a brief overview of Studio One’s features.
所有的 PreSonus 音频接口都包括 PreSonus Studio One Artist 录音软件，
该软件带有超过 4GB 的插件、 loops 和样本，提供给你音乐录音和制作
所需的一切。本手册 第 5 部分 的快速入门指南将帮助你配置 Quantum
2626 ，并为你提供 Studio One 功能的简要介绍。

3
1
Overview
Quantum 2626
• Cue Mix provides complete integrated control over all Quantum functions
• Unlimited track count, inserts, andsends
• 20 high-quality, Native Effects™ plug-ins; amp modeling (Ampire), delay
(Analog Delay, Beat Delay), distortion (RedLightDist™), dynamics processing
(Channel Strip, Compressor, Gate, Expander, Fat Channel, Limiter, Tricomp™),
equalizer (Channel Strip, Fat Channel, Pro EQ), modulation (Autofilter,
Chorus, Flage, Phaser, X-Trem), reverb (Mixverb™, Room Reverb), and
utility (Binaural Pan, Mixtool, Phase Meter, Spectrum Meter, Tuner)
• More than 4 GB of loops, samples, and instruments, featuring:
Presence™ XT virtual sample player, Impact virtual drum machine,
SampleOne™virtualsampler,MaiTaivirtualpolyphonic analogmodeling
synth, Mojito virtual analog-modeled subtractive synthesizer
• Innovative and intuitive MIDImapping
• Powerful drag-and-drop functionality for faster workflow
• Available for macOS and Windows
• Cue Mix 提供对所有Quantum功能的完全集成控制
•
无限的轨道计数、插入和发送
• 20个高质量的Native Effects™插件；放大器建模（Ampire），延迟（Analog Delay, Beat
Delay），失真（RedLightDist™），动态处理（Channel Strip, Compressor, Gate,
Expander, Fat Channel, Limiter, Tricomp™），均衡器（Channel Strip, Fat Channel, Pro
EQ），调制（Autofilter, Chorus，Flage，Phaser，X-Trem），混响（Mixverb™，Room
Reverb），和实用工具（Binaural Pan，Mixtool，Phase Meter, Spectrum Meter,
Tuner）。
•
超过 4GB 的loops、采样和乐器，特点是：Presence™ XT 虚拟采样器，Impact 虚拟鼓
机。
• SampleOne™虚拟采样器，Mai Tai虚拟多声道模拟合成器，Mojito虚拟模拟减法合成
器。
•
创新、直观的MIDI映射
• 强大的拖放功能，加快工作流程
•
可用于macOS 和Windows 系统

4
1
Overview
Quantum 2626
1.4 What is in the Box 包装里有什么
1.5 What is in the Box Owner’s Manual
You Quantum 2626 interface package contains the following:
你的 Quantum 2626 接口包包含以下内容：
PreSonus Quantum 2626 Thunderbolt Audio Interface
and Studio Command Center
PreSonus Quantum 2626 Thunderbolt 音频接口
和 ”Studio Command Center”
External power supply 外部电源
Quantum 2626 Quick Start Guide 快速入门指南
PreSonus Health Safety and Compliance Guide PreSonus
健康安全与合规指南
PowerUserTip: Allcompanionsoftwareand driversforyourQuantum 2626interface
interface areavailablefordownloadfromyourMyPreSonususeraccount.Simplyvisit
http://my.presonus.comandregisteryourQuantum2626interfacetoreceivedownloads
and licenses.
用户提示
:
你的
Quantum 2626
接口界面中所有配套软件和驱动程序，都可以从
My PreSonus 用户帐户下载。只需访问官方网站 http://my.presonus.com ，并注册你
的
Quantum 2626
接口，即可获得下载和许可证。
Quantu m 2626
24- bit , 19 2 kH z Thu nde r bolt
™
3 Audio In t er face
GettingStarted•ErsteSchritte•Cómoempezar•Pourcommencer•开始
Go on line tomy.pre sonu s.com and Navegue online a my.pre sonu s.com y
register you r ser i al nu mb e r. registre su nú mero de ser ie.
TheQuantum2626 is loadedwith professional features,suchas
LaQuantum2626 vienecargada de características
high-headroom,Class A XMAX microphone preamplifiers;high-
profesionales,como un techodin ámicoalto, previos de micro
definition24-bit, 192 kHz conversion; high-speedThunderbolt 3
XMAXClase A; conversión enalta definición a 24-bit y 192 and
aswell as additional plugins, content, and more.It ’s our giftde
Öffnen Sie die Webseite My.PreSonus. Allez sur my.preson us.comet
com un d reg is tr ier en SieI hre enregistrez v ot re num é ro de s é rie.
Seriennum mer.
Quantum2626 bietet eine Vielzahl professionellerFunktionen
LaQuantum 2626 offre des fonctionnalitésprofessionnelles, wie
Class-AXMAX Mikrofonvorverstärkermit großer telles que des
préamplificateursde microphonede classe A
Aussteuerungsreserve,hochauflösendeD/A-Wandler mit 24
à grandemarge XMAX, une conversionhaute définition en
Bit/192kHz, Thunderbolt 3 Hochgeschwindigkeitsschnittstelle 24
登录 my. p r es o n u s. c o m 并注册您的序列号。
Quantum 2626 具 备 专业 功 能 ， 如
高净空、
A
级
XMAX
麦克风前置放
大 器 ； 高 清 24 位， 192khz 转换 ；
高速 T
hunder bolt 3
及 以 上 。 注 册 了
Quantum 2626
后，您就可以下载
Studio One Artist 的免费副本以及
他
作
插
和
件
安
、
装
内
的
容
更
等
多
。
信
这
息
是
，
我
请
们
查
送
询
给 PreSonus 新客户的
用户手
册。
www.PreSonus.com
®18011 Grand Ba y Ct.
Louisiana 70809
www .pr es o nu s. c om Par t # 71-

5
2
Hookup
Quantum 2626
2Hookup
2.1 Front Panel Connections and Controls 前面板的连接和控制
2.1 FrontPanelConnectionsandControls Owner’s Manual
About XMAX Preamps and Combo Jacks. Your Quantum 2626 interface is
equipped with 8 PreSonus XMAX microphone preamplifiers for use with all types
of microphones. The XMAX design provides a Class A input buffer, followed by a
dual-servo gain stage. This arrangement results in ultra-low noise and wide gain
control, allowing you to boost signals without increasing noise. The Quantum
2626 provides two Mic/Inst inputs and six Mic/Line inputs on the front panel.
Each analog input on the Quantum 2626 interface featuresa combo jack. This
convenient connector accepts either a ¼-inch phone plug or an XLR plug.
关于 XMAX 前置放大器和组合插座。你的 Quantum 2626 接口配备了 8 个
PreSonus XMAX 麦克风前置放大器，可用于所有类型的麦克风。 XMAX
的设计，提供一个 A 类输入缓冲器，然后是一个双伺服增益级。这种
安排导致了超低的噪音和宽广的增益控制，使你可以在不增加噪音的
情况下提高信号。 Quantum 2626 在前面板上提供了两个麦克风 / 输入
和六个麦克风
/
线路输入。
Quantum 2626 接口上的每个模拟输入，都有一个组合插孔。这个方便
的接口可以连接 ¼ 英寸电话插头或 XLR 插头。
Microphone/Instrument inputs. The ¼-inch TS connectors on Channels 1 and 2 are
for use with instruments (guitar, bass, etc.). When an instrument is plugged into the
instrument input, the mic preamp is bypassed, and the signal is routed to the
instrument preamplifier stage.
Microphone/Instrument inputs. （ 麦克风 / 乐器输入 ） 。 Channel 1 和 2 上的 ¼
英寸 TS 接口是用于乐器（吉他、贝斯等）的。当乐器被插入乐器输入时，
麦克风前置放大器被绕过，信号被输送到乐器前置放大器阶段。
Microphone/Line inputs. The ¼-inch TRS connectors on Channels 3
through 8 are for use with line-level sources (synths, keyboards, effects
processors, etc.). When a device is plugged into the Line input, the mic preamp
is bypassed, and the signal is routed to the instrument preamplifier stage.
Microphone/Line inputs. （麦克风/线路输入） Channel 3
至
8
的
¼
英寸
TRS
接口用于线路电平的信号源（合成器、键盘、效果器、处理器等）。当
设备被插入线路输入时，麦克风前置放大器被绕过，信号被送到乐器前
置放大器阶段。
Pleasenote: Aswithanyaudioinput device,plugginginamicrophone oran
instrument, or turning phantom power on or off will create a momentary
spike in the audio output of your Quantum 2626 interface.Because ofthis, we
highly recommend that youturn down the channel trim before changing
connections or turning phantom power on or off.This simple step will add
years to life of your audio equipment.
请注意： 与任何音频输入设备一样，插入麦克风或乐器，或打开或关闭幻象
电源，都会在
Quantum 2626
接口的音频输出中，产生一个瞬间的峰值。正
因为如此，在改变连接或打开或关闭幻象电源之前，我们强烈建议你，调
低
” Channel trim”
。这个简单的步骤，会使你的音频设备寿命延长几年。

6
2
Hookup
Quantum 2626
PreampGain: Use this control to adjust the level of the microphone
preamps for each Channel.
PreampGain: 用这个控制来调整每个通道的麦克风前置放大器
的电平。
Signal LEDs. The Input Signal LEDs offer three signal threshold indications:
Signal LEDs. (信号LED灯)
输入信号
LED
灯，共三种信号阈值指示：
• Green. The light will illuminategreenwhen the input signalexceeds- 50 dBFS
• Green.
当输入信号超过
-50dBFS
时，该灯将亮起绿色。
• Yellow. The light will illuminate yellow with the input signal exceeds- 2.0 dBFS
• Yellow.
当输入信号超过
-2.0dBFS
时，该灯将亮起黄色。
• Red (Clip). The red Clip LED will illuminate when your input signal
reaches -0.5 dBFS. At this level, the signal will begin to overload the
analog-to-digital converters and exhibit signs of clipping. Use the gain
controls to keep the signal below this level. (Note: The once the
signal has exceeded the Clip Threshold, the LED will stay red for one
second)
• Red (Clip). 当你的输入信号达到 -0.5dBFS 时，红色的 “Clip”LED 灯
将亮起。在这个电平上，信号将开始超过模数转换器的负荷，
出现削波的迹象。使用增益控制，来保持信号低于这个电平。
( 注意： 一旦信号超过了削波阈值， LED 灯将保持红色一秒钟。）
48V: The Quantum 2626 interfaces provide 48V phantom power in
two banks of four microphone preamps. When 48V is active, the
blue LED at the top of that channel’s meters willilluminate.
48V: Quantum 2626 接口在两组四个麦克风前置放大器中提
供 48V 幻象电源。当 48V 电源被激活时，该通道仪表顶部的
蓝色
LED
灯会亮起。
Warning: Phantom power is only required for condenser microphones
and can severely damage unbalanced dynamic mics, especially ribbon mics.
Therefore, switch phantom power off for all channels where it is not required.
警告 ：幻象电源只适用于电容式麦克风。而会严重损坏不
平衡的动态话筒，特别是带状话筒。因此，请关闭所有不
需要幻象电源的通道。
XLR connector wiring for phantom power:
用于幻象电源的
XLR
连接器接线：
Pin 1= GND Pin 2= +48V Pin 3 = +48V
Main. This is the volume control for the Main Left/Right outputs on the rear of the
unit and has a range of -80 dB to 0 dB.
Main.
这是设备后部的
“ Main Left/Right”
输出的音量控制，其范围为
-80dB
至
0dB
。

7
2
2.2
Hookup
Back Panel Connections
Quantum 2626
Owner’sManual
Headphones. Your Quantum 2626 interface provides two
headphone outputs, each with its own level control. Both
headphone outputs share a stream with the Main Outputs.
Headphones.
你的
Quantum 2626
接口提供了两个耳机输
出，每个都有自己的电平控制。这两个耳机输出
与 ” Main Outputs ” 主输出共享一个音频流。
Sync light. This light is the clock source / sync indicator. It lets
you know if you unit is receiving word clock correctly.
Sync light. 这是时钟源 / 同步指示灯。让你了解设备是否
能正确接收字时钟。
• Blue.When this light is blue, your Quantum 2626 is correctly
synced via Thunderbolt, word clock, ADAT, or S/PDIF
• Blue. 当这个灯为蓝色时，你的 Quantum 2626 通过
Thunderbolt 、字时钟、 ADAT 或 S/PDIF 正确同步。
• Flashingredandblue.Quantum 2626 is in the process of
trying to sync to a received clock signal.
• Flashing red andblue .
闪烁红色和蓝色，
Quantum
2626 正在与接收到的时钟信号同步的尝试过程中。
• Red. Quantum 2626 is either not synced to your computer
or its external clock source is not present.
• Red. 灯为红色时 ， Quantum 2626 不是没有与你的计
算机同步，就是其外部时钟源不存在。
• Flashingpurple.The identify button is active in UC Surface.
• Flashingpurple.
灯为紫色时，识别按钮在
UC Surface
中是激活的。
Power User Tip: Word clock is the timing signal with which digital devices
sync frame rates.Proper word clock sync preventsdigital devices from
having pops, clicks, and distortion in the audio signal due to mismatched
digital audio transmission. In general, you will use your Quantum 2626
interface as the master clock in your studio; it provides high-quality word
clock for this purpose. However, if you would like to use another device as
the master clock, you can set the input source for clocking in UC Surface. See
Section 4.1 for details .
用户提示： 字时钟是数字设备同步帧率的计时信号。正确的字时钟同步
可以防止数字设备由于数字音频传输不匹配而导致音频信号中出现爆音、
咔嚓和失真。一般来说，你将使用
Quantum 2626
接口作为演播室的主
时钟；这是为了提供高质量的字时钟。然而，如果你想使用其他设备作
为主时钟，你可以在 UC Surface 中设置时钟的输入源。 详见第 4.1 节。

8
2
2.2
Hookup
Back Panel Connections
Quantum 2626
Owner’sManual
2.2 Back PanelConnections 后面板连接
Line Outputs. Quantum 2626 interfaces have 8 TRS Balanced
Line Outputs to route to external devices, such as headphone
amps, signal processors, and additional monitors.
Line Outputs. 线路输出。 Quantum 2626 接口有 8 个 TRS
平衡线路输出，可以路由到外部设备，如耳机放大器、
信号处理器和额外的监听。
• Outputs1and2mirror the playback streams of the Main,
Headphone 1, and Headphone 2 Outputs.
• “Outputs 1and 2”
反映了
“Main”
、
”Headphone 1”
和
”Headphone 2”
输出的播放流。
• Outputs3-8 are independent playback streams.
• “Outputs 3-8 ”是独立的播放流。
Every line output is DC coupled to provide control voltage to external analog
equipment. This feature can be used with any plug-in that supports it.
每个线路输出都是直流耦合，以提供控制电压给外部模拟设备。这
个功能可以与任何支持它的插件一起使用。
Main Outs. These are the main outputs for Quantum 2626. The output level of the
Main Outputs is controlled by the Main level control on the front of the unit. The
main outputs are sourced from playback streams 1 and 2. Both Main Outputs are DC
coupled to provide control voltage to external analog equipment. This feature can be
used with any plug-in that supports it.
“ Main Outs. ”
这些是
Quantum 2626
的主输出。主输出的输出电平由
设备前面的
” Main level ”
来控制。主输出的来源是播放流
1
和
2
。两个
Main Outputs 主输出都是直流耦合，为外部模拟设备提供控制电压。
这个功能可以与任何支持它的插件一起使用。
Preamp Outs and Line Returns. These line-level connections for channels 1 and 2
allow you to insert outboard hardware like compressors and EQs into the signal
chain.
PreampOuts and Line Returns.
前置放大器输出和线路返回。
Channel 1
和
2
的这些线路级连接，允许你将压缩器和均衡器等外置硬件插入信号链中。
LineReturns are normalled to the channel 1 and 2 preamp outputs, so they take
precedenceoverthe corresponding Mic/Inst input on the frontof the Quantum 2626.
Line Returns
（线路返回） 被规范为通道
1
和
2
的前置放大器输出，因此它们
优先于
Quantum 2626
前面的相应的
Mic/Inst
输入。
Power user tip: the Line Returns can also be used to input line-level devices that
have their own volume control; synths, channel strips, preamps, etc.
用户提示：
Line Returns
线路返回也可以用来输入有自己音量控制的线路级
设备
；
合成器、通道条、前置放 大器等。

9
2
2.2
Hookup
Back Panel Connections
Quantum 2626
Owner’sManual
WordClockInandOut.These BNC connections allow Quantum 2626 to
receive and transmit wordclock to and from other digital audio devices.
WordClockInandOut. 字时钟输入和输出。这些 BNC 连接允许
Quantum 2626
接收和传输字时钟到其他数字音频设备。
PowerUserTip: In UC Surface,when using the BNC Clock input, you will need to set
“BNC” as the Clock Source and set the sample rate to correspond to that of the
external device. See Section 4.1 for details. A 75Ω BNC word clock cableis
required to achieve proper sync.
用户提示： 在 UC Surface 中，当使用 BNC 时钟输入时，你需要将 "BNC " 设置
为时钟源，并将采样率设置为与外部设备的采样率一致。 详见第
4.1
节 。为
了实现正确的同步，需要使用 75Ω 的 BNC 字时钟电缆。
S/PDIF In and Out. The S/PDIF connections allow two channels of audio to be
transmitted and received at rates up to 24-bit, 96 kHz. The S/PDIF I/O also allows all
Quantum 2626 interfaces to send and receive word clock to external digital devices.
S/PDIF In and Out. S/PDIF 音频接口连接允许两个通道的音频以高达 24 位，
96kHz 的速率传输和接收。 S/PDIF 输入 / 输出还允许所有 Quantum 2626 接口发
送和接收字时钟到外部数字设备。
PowerUser Tip: In UC Surface,you will need to set “S/PDIF” as the Clock Source
and the sample rate to correspond to the external device when using an external
S/PDIF device as your master clock. See Section 4.1 for details.
用户提示 ：在
UC Surface
中，当使用外部
S/PDIF
设备作为主时钟时，你需要
将 "S/PDIF " 设置为时钟源，并将采样率与外部设备对应。 详见第 4.1 节 。
ADAT–S/MUXInandOut.These are the ADAT – Dual S/MUX connections for
your external digital devices.When recording or playing back at 44.1
or 48 kHz, each ADAT I/O will provide 8 of the 16 available channels
consecutively, from left to right. When recording or playing back at 88.2 or
96 kHz, each connection will provide four of the available eight channels.
ADAT–S/MUXInandOut.
这些是用于外部数字设备的
ADAT-S/MUX
连
接。当以
44.1
或
48kHz
时，每个
ADAT
输入
/
输出将连续提供
16
个可用
通道中的 8 个，从左到右。当以 88.2 或 96kHz 录音或回放时，每个连
接将提供 8 个可用通道中的 4 个。
These inputs and outputs do not function at 176.4 or 192 kHz:
这些输入和输出在 176.4 或 192kHz 时不发挥作用：
ADAT 1 Input
ADAT 2 Input
ADAT 1 Output
ADAT 2 Output
44.1 / 48 kHz
Channels 11-18 / 7-14
Channels 19-26 / 15-22
Channels 17-24 / 9-16
Channels 25-32 / 17-24
88.2 / 96 kHz
Channels 11-14 / 7-10
Channels 15-18 / 11-14
Channels 17-20 / 9-12
Channels 21-24 / 13-16
When connecting a DigiMax DP88 to your Quantum interface, the ADAT
connections will also send and receive preamp control information for the
DigiMax DP88, so that it can be controlled directly from UC Surface or
Studio One.
当把
DigiMax DP88
连接到你的
Quantum
接口时，
ADAT
连接也将发送
和接收 DigiMax DP88 的前置放大器控制信息，这样可以从 UC Surface
或 Studio One 直接控制它。
PowerUser Tip: In UC Surface,you will need to set “ADAT1” as the Clock Source
and the sample rate to correspondto the external device when using an
external ADAT device as your master clock. See Section 4.1 for details. The ADAT
2 input cannot be used to receive word clock.

10
2
2.2
Hookup
Back Panel Connections
Quantum 2626
Owner’sManual
用户提示： 在 UC Surface 中，当使用外部 ADAT 设备作为主时钟时，需要将
"ADAT 1 " 设置为时钟源，并将采样率与外部设备对应。详见第 4.1
节。 ”ADAT 2” 输入不能用于接收字时钟。
Thunderbolt port. Use this port to connect your Quantum 2626 interface to
your computer.
Thunderbolt port.
使用这个端口将
Quantum 2626
接口连接到你的电脑
上 。
Note: If your computer has Thunderbolt 2 ports, you’ll need a bi-directional
Thunderbolt 3 to Thunderbolt 2 adapter. At the time of publication, the only
supported bi-directional adapter is the one made by Apple.
注意： 如果你的电脑有
Thunderbolt 2
端口，你需要将一个
Thunderbolt 3
到
Thunderbolt 2
的双向适配器。唯一公开支持的双向适
配器是苹果公司制造的。
MIDI I/O. These are the MIDI input and output connections. MIDI stands for
“MusicalInstrumentDigitalInterface.”However,MIDIcanbeusedformanythings
other than instruments and sequencing. The MIDI inputs and outputs allow
connectiontoavarietyofMIDI-equippedhardware,suchaskeyboardcontrollers,
and can be used to send and receiveMIDI Machine Controland MIDI Time Code.
MIDI I/O. 这些是 MIDI 输入和输出连接。 MIDI 是 "Musical Instrument
Digital Interface" 乐器数字接口的意思。然而，除了乐器和音序之外，
MIDI
还可用于许多方面。
MIDI
输入和输出允许连接到各种配备了
MIDI
的硬件，如键盘控制器，并可用于发送和接收
”MIDI Machine Control”
MIDI
控制信号 和
”MIDI Time Code” MIDI
时间码。
Note: MIDI does not carry audio signals but is frequently used to trigger or
control an audio source, such as a virtual instrument or hardware synthesizer.
Youshould ensure that MIDI data is correctly sent and received by the
appropriate hardware or software. You may also need to route hardware
sound sources’ audio to the inputs of your Quantum 2626 interface. Please
consult the User’sManualof your MIDI devices for help with MIDI setup and
usage.
注意 ：
MIDI
不携带音频信号，但经常被用来启动或控制一个音频源，
如虚拟乐器或硬件合成器。你应该确保 ，
MIDI
数据被适用的硬件或
软件准确地发送和接收。也许你还需要将硬件声源的音频，路由到
Quantum 2626
输入的接口。请查阅您的
MIDI
设备的用户手册，以获
得有关
MIDI
设置和使用的帮助。
Power Button. This turns your Quantum 2626 on and off.
Power Button.
这可以开启和关闭你的
Quantum 2626
Power Connection. This is where you connect the Quantum 2626 interface’s
external power supply.Your Quantum interface is equipped with a twist-lock power
connection, keep this in mind when connecting disconnectingit from your interface.
Power Connection. 这里是你连接 Quantum 2626 接口外部电源的地方。你的
Quantum 接口配备旋转式锁紧电源连接，在连接和断开接口时，请记住这一
点。
Lock Unlock

11
2
Hookup
Quantum 2626
2.3 Quantum HookupDiagram 连接图
See www.presonus.com for
the latest system
requirements.
2.3 Quantum Hookup Diagram
Owner’sManual
DigiMax-series preamps
or other compatible hardware

12
3
Connecting to a Computer
Quantum 2626
3Connecting to a Computer 连接计算机
3.1 Installation for Windows and macOS 为Windows 和macOS 系统安装
3.1 Installation forWindows and macOS Owner’s Manual
Your Quantum 2626 interface is loaded with professional audio tools and
flexible monitoring controls. Before connecting to a computer, please visit
https://www.presonus.com/products/Quantum/tech-specs to verify the latest
system requirements.
你的
Quantum 2626
接口加载了专业的音频工具和灵活的监听控制。
请访问官方网站 https://www.presonus.com/products/Quantum/tech-specs
在连接到电脑之前，可以核实最新的系统要求。
Note: The speed of your processor,amount of RAM, and capacity, size,and speed of your
hard drives will greatly affect the overallperformance of your recording system. A faster
processor and more RAM can reduce signal latency (delay) and improve overall
performance.
注意 ： 处理器的速度、 RAM 的数量以及硬盘的容量、大小和速度将大大影
响你的录音系统的整体性能。更快的处理器和更多的内存可以减少信号延
迟（延迟），提高整体性能。
The Universal Control installer for macOS and Windows is available for download
from your My PreSonus user account. This bundled installer includes Universal
Control, UC Surface, and the audio driver for your Quantum 2626. To begin, you
must first visit http://my.presonus.com, create or log into your user account,
and register your Quantum 2626 interface. Once registered, all software
downloads will be available from within your My PreSonus user account.
适用于 macOS 和 Windows 系统的 Universal Control 安装程序，你可从 My
PreSonus 用户账户下载。这个捆绑的安装程序包括 Universal Control 、 UC
Surface
，以及
Quantum 2626
的音频驱动。首先，你必须访问官方网站
http://my.presonus.com
创建或登录你的用户帐户。并注册你的
Quantum
2626 接口。一旦注册完毕，所有的软件下载，都可以从你的 My PreSonus 用
户帐户中获得。
Connect your Quantum 2626 interface to an available Thunderbolt port and launch the
Universal Control installer. The installer will take you through each step of the installation
process. This application will install the macOS or Windows drivers as well as UC Surface.
Please read each message carefully.
将你的
Quantum 2626
接口连接到一个可用的
Thunderbolt
端口，并启动
Universal Control 安装程序，将会带你完成安装过程的每一步。这个应用程
序将安装 macOS 或 Windows 驱动以及 UC Surface 。请仔细阅读每条信息。
It is recommended that you quit all applications before you start the installation.
在开始安装之前，建议你退出所有的应用程序。
The Universal Control installer will take you through each step of the installation process.
Universal Control
安装程序将带你完成安装过程的每一步。
On the first installation of Universal Control, MacOS will prompt for security access to install
the Thunderbolt driver.
在第一次安装 Universal Control 时， MacOS 会提示安全访问以安装驱动程序
Thunderbolt 。
Open System Preferences and click Security & Privacy to “Allow” the installation.
打开 “System Preferences” 并点击 ”Security & Privacy” 安全 & 隐私， "Allow"
允许安装。

13
3
Connecting to a Computer
Quantum 2626
If this message does not appear in Security & Privacy, restart the computer.
如果该信息没有出现在 ”Security & Privacy” 安全与隐私中，请重新启动计算机。
Note: If Universal Control has already been installed and Quantum is not syncing,
run the uninstaller and reinstall the latest version of Universal Control to install
the driver.
注意： 如果已经安装了 Universal Control 程序，而 Quantum 没有同步，请运
行卸载程序，并重新安装
Universal Control
最新版本的安装驱动程序。

14
3
3.2
Connecting to a Computer
Usinga Quantum 2626 Interfacewith Popular Audio Applications
Quantum 2626
Owner’sManual
3.2 Using a Quantum 2626 Interface with Popular Audio Applications
在热门的音频应用中，使用Quantum 2626接口
Ableton Live
Apple Logic
Completesetup instructions forStudio One Artist and a brief tutorial on its
features can be found in Section 5 of this manual. However,you can use your
Quantum 2626interfacewith anyaudio-recordingapplicationthatsupports
CoreAudioor ASIO.Please consult the documentation that came with your
audio application for specific instructions on how to select the Quantum
2626 interface driver as the audio-device driver for your software.
Studio One Artist 的完整设置说明和其功能的简要教程，你可以在本
手册的第五部分找到。 Quantum 2626 接口你可以用于任何支持 Core
Audio 或 ASIO 的音频录制应用程序。关于如何选择 Quantum 2626 接
口驱动作为软件的音频设备驱动，请查阅音频应用程序附带的文件，
以获得具体说明。
Below are basic driver-setup instructions for a few popular audio applications.
下面是几个热门音频应用程序的基本驱动设置说明。
1. Launch Ableton Live. 启动 Ableton Live
2. Go to Options | Preferences | Audio. 进入选项 | 首选项 | 音频。
3. Choose Driver Type: ASIO | Audio Device: ASIO PreSonus Quantum 2626
Go to Input Config: Enable and select the desired Inputchannels.
选择驱动类型 : ASIO | 音频设备： ASIO PreSonus Quantum 2626
转到输入配置：启用并选择需要的输入通道。
4. Go to Output Config: Enable and select the desired Output channels.
转到输出配置：启用并选择所需的输出通道。
1. Launch Logic.
启动
Logic
。
2. Go to Logic | Preferences | Audio.
进入
Logic |
首选项
|
音频。
3. Click on the Devices Tab.
点击 ”Devices Tab” 设备标签。
4. On the Core Audio tab, checkEnabled.
在
Core Audio
标签上，选中
Enabled
。
5. Select PreSonus Quantum 2626 from the device menu.
从设备菜单中选择 PreSonus Quantum 2626 。
6. You will be asked if you’d like to relaunch Logic. Click try (re)launch.
你会被问到是否要重新启动
Logic
。点击尝试（重新）启动。
7. Your Quantum 2626 features custom I/O labels for faster workflow.To
enable these labels for use in Logic, go to Options | Audio | I/OLabels.
你的
Quantum 2626
具有自定义的
I/O
标签，以加快工作流程。
要启用这些标签以便在 Logic 中使用，请进入选项 | 音频 |I/O 标
签。

15
3
3.2
Connecting to a Computer
Usinga Quantum 2626 Interfacewith Popular Audio Applications
Quantum 2626
Owner’sManual
8. The second column in the pop-up window will be named
Provided by Driver. Activate each of these labels for your
Quantum 2626. When you are done, close this window.
在弹出的窗口中，第二列将被命名为 "Provided by
Driver"
由驱动器提供。为
Quantum 2626
激活这些标
签。完成后，关闭这个窗口。
Avid Pro Tools 10+
1. Launch ProTools.
启动
Pro Tools
。
2. Go to Setup | Hardware and select Quantum 2626 from the Peripherals list. ClickOK.
进入设置 | 硬件，从外围设备列表中选择 Quantum 2626 。点击 “ OK ” 确定。
3. Go to Setup | Playback Engine and select Quantum 2626 from the menu at the top of the
window. Click ”OK”.
进入设置 | 播放引擎，在窗口顶部的菜单中选择 Quantum 2626 。点击 "OK" 确定。
Cakewal k by Bandlab
1. Launch Cakewalk by Bandlab.
启动
Cakewalk by Bandlab
。
2. Go to E dit | Preferences
进入
"Edit"
编辑
|"Preferences"
优先。
3. In the Devices tab,uncheck the output driverforthe Generic Low Latency Driver.This is
usually on by default, and will not let you check anything unless it’s unchecked.
在 ”Devices tab” 设备标签中，取消 ”Generic Low Latency Driver” 通用低延迟驱动程序的
输出驱动装置。这通常是默认的，除非取消勾选，否则不会让你勾选任何东西。
4. Check all the Quantum input and output driver boxes
勾选所有的 Quantum 输入和输出驱动框
5. Click the “Apply”and “OK”buttons.
点击 "Apply” 应用 和 "OK " 确定按钮。
6. Click the Driver Settings tab
点击 "Driver Settings" 驱动程序设置标签
7. Set the Playback Timing Master to “Quantum ASIO driver Main Out L/Line Out 1”
设置 ” Playback Timing Master ” 播放时序主控为 "Quantum ASIO driver Main Out L/Line Out
1" 。
8. Set the Record Timing Master to: “Quantum ASIO driver Mic/Instrument In 1”
设置
” Record Timing Master ”
录音时序主控为：
"Quantum ASIO
驱动麦克风
/
乐器输入
1"
。
9. Click the “Apply”and “OK”buttons.
点击 “Apply” 应用 和 “OK” 确定按钮。

16
3
3.2
Connecting to a Computer
Usinga Quantum 2626 Interfacewith Popular Audio Applications
Quantum 2626
Owner’sManual
Steinberg Cubase
1. Launch Cubase.
启动
Cubase
。
2. Go to Devices | DeviceSetup.
转到 ”Devices” 设备| “Device Setup” 设备设置。
3. Select“VST Audio System”from the Devices column in the Device Setup.
在 ”Device Setup” 设备设置的设备栏中选择 ”VST Audio System” VST 音频系统。
4. Select PreSonus Quantum 2626 from the ASIO Driver dropdown list.
从 ”ASIO Driver” 驱动下拉列表中选择 PreSonus Quantum 2626 。
5. Click “Switch”to begin using the Quantum 2626 driver.
点击 "Switch" 切换键，开始使用 Quantum 2626 驱动
6. Once you have successfully changed the driver, go to Devices | VST Connections to enable
your input and outputbuses.
一旦你成功地改变了驱动程序，进入 ”Devices” 设备 |”VST Connections” 连接，启用
你的输入和输出总线。

17
4
3.2
UC Surface Control Software
Usinga Quantum 2626 Interfacewith Popular Audio Applications
Quantum 2626
Owner’sManual
4UC Surface Control Software UC表面控制软件
UC Surface is a powerful control software for your Quantum 2626 interface.
These control functions are completely integrated inside Studio One. UC Surface
allows users of other popular DAW applications to access these functions.
UC Surface is designed to verify that your Quantum 2626 interface has the
correct firmware version installed. You will be prompted
if your Quantum 2626 interface needs its firmware updated. Click on the Update
Firmware button to begin the update.
UC Surface 是一个强大的控制软件，用于 Quantum 2626 接口。这些控制功
能完全集成在
Studio One
里面。
UC Surface
软件允许其他热门的
DAW
应用
程序的用户访问这些功能。
使用 UC Surface 软件可以验证你的 Quantum 2626 接口，是否安装了正确的
固件版本。如果你的
Quantum 2626
接口需要更新其固件，会提示你。点
击
” Update Firmware”
按钮，开始固件更新。
Warning: Do not power off or disconnect your Quantum 2626 interface
during the firmware update. Once the firmware update is successfully
completed,you will be alerted and instructed to disconnect your power supply and
Thunderbolt cable and reconnect it before rebooting your device. It is not sufficient
to simply power down your unit, you must disconnect the power source.
警告： 在固件更新期间，不要关闭或断开 Quantum 2626 接口的电源。一旦
固件更新成功，会指示你断开电源和
Thunderbolt
电缆，在重新启动你的设
备前，重新连接它。 仅仅关闭设备的电源是不够的，你必须断开电源的连
接。
When the firmware update is complete, you must disconnect the
physical power source from your Quantum 2626 interface and
reconnect it. Powering it off it will not complete the update process.
当固件更新完成后，你必须断开 Quantum 2626 接口的物理电源，
并重新连接。电源关闭将不会完成更新过程。

18
4
4.4
UC Surface ControlSoftware
RTA
Quantum 2626
Owner’sManual
4.2 ADAT Inputs ADAT 输入
4.3 MIDI Control MIDI 控制
4.1 UC Surface Launch Window UC表面启动窗口
Sample Rate. Changes the sample rate.
Sample Rate. 改变采样率。
You can set the sample rate to 44.1, 48, 88.2, 96, 176.4, or 192 kHz. A higher
sample rate will increase the fidelity of the recording but will increase the file
size and the amount of system resources necessary to process the audio.
你可以将采样率设置为
44.1
、
48
、
88.2
、
96
、
176.4
或
192kHz
。较高的
采样率会提高录音的保真度，但会增加文件大小和处理音频所需的系
统资源。
Clock Source. Sets the digital clock source.
Clock Source.
设置数字时钟源。
From this menu, you can set the clock source for your Quantum 2626
interface: Internal, External S/PDIF, or External ADAT.
从这个菜单中，你可以为你的 Quantum 2626 接口设置时钟源 ” Internal,
External S/PDIF, or External ADAT ”
Please note: Only ADAT 1 can be used as a clock source input for your Quantum 2626.
请注意 ：只有
ADAT 1
可以作为
Quantum 2626
的时钟源输入。
When a DigiMax DP88 is connected to your Quantum interface’s ADAT Input
and Output, you will be presented with ADAT controls, allowing you to
remote control your DigiMax DP88’s preamps and phantom power.
当你的
Quantum
接口的
ADAT
输入和输出被
DigiMax DP88
连接时，你会
看到
ADAT
控制，允许你远程控制
DigiMax DP88
的前置放大器和幻象电
源。
As previously mentioned, the preamps on your Quantum-series interface can
be controlled via MIDI over Thunderbolt. This feature can be enabled and
disabled from UC Surface.
如前所述， Quantum- 系列接口上的前置放大器可以通过 Thunderbolt 的
MIDI
控制。系列的接口可以通过
Thunderbolt
的
MIDI
控制。这个功能可
以从 UC Surface 启用和禁用。
The preamp functions on your Quantum-series interface can be controlled via
MIDI from your DAW application, an external MIDI controller, both, or neither.
Select ‘Internal MIDI Only’ if you only want your DAW to send and receive MIDI