Pressalit PLUS shower seat 450 User manual
Product
PLUS shower seat 450, electrically height adjustable and sideways
adjustable
Item number
R7664112
VVS:
777517412
EAN:
5708590360300
HMI:
124227
Colour
Anthracite grey
Product description
PLUS shower seats are offered in a number of colours. They are available as both
fixed height, electrically adjustable and manually adjustable, with and without
aperture, and with an option of back and armrests.
They are suitable for wall-mounting or for fitting to Pressalit PLUS wall tracks.
Powered PLUS shower seat 450, with back- and armrests. Electrically height
adjustable by 500 mm, the armrests are independently height adjustable. The seat
and the armrests are foldable.
Materials: Comfortable polyurethane foam over a plywood core, fitted to an aluminium
profile. The non-slip gripping surface of the armrests are made of soft SEBS.
For fitting to horizontal PLUS wall track (not included).
Replaces R7480
Adjustability
Height and sideways adjustable
Adjustment height
500 mm
Product capacity
Maximum user mass (seat): 150 kg.
Maximum load for armrests is 55 kg.
When the seat is loaded with 150 kg, each wall fastener is loaded with 35 kg.
The seat has been tested statically with safety factor 2.5, which is a requirement
according to the applied assistive products standards.
Speed
Speed up mm: 5 mm/s
Speed down mm: 5 mm/s
Noise level
48 dB
Product
PLUS shower seat 450, electrically height adjustable and sideways
adjustable
Item number
R7664112
Materials
The shower seat is made of polyurethane (PU) foam with a plywood core and this is
covered with an in-mould coated surface that is protected using a clear PU lacquer.
The backrest is made of polyurethane (PU) foam protected using a clear PU lacquer.
The arms are primarily constructed of 10-micrometre anodized aluminium, with a non-
slip gripping surface at the end made of soft SEBS and inforporating a glass-
reinforced nylon core. The hinge arm is also made of soft SEBS. Internal components
and fasteners are primarily made of stainless steel. The hinge barrel is capped with
ABS.
Ergonomy
Ergonomically designed seat - contact surface are 450 x 437 mm. Soft and slip-
resistant material that has a warm feel. The oval shape of the armrests gives an easy
and comfortable surface to lean on and push against.
Features
Powered raising or lowering at the push of a button - the seat can easily be adjusted
upwards or downwards to a good working height for the carer while the user sits on it.
The seat, backrest and armrests can be adjusted simultaneously thanks to a safe and
easy click system. The armrests can also be adjusted independently of the seat and
backrest. The seat and armrests can fold up when not in use or to maximise floor
space. Wired hand control comes with brackets for fitting to the wall.
Mains connection
(V)
230
Actuator (motor)
LA40 (Linak) 6000N, IPX6
Control box
SMPS14 (Linak) IPX6
Wired remote
control
HB3 (Linak) IP66
Power consumption
(maximum load)
Power consumption by maximum load, watt: 60 W
Power consumption by standby: 0,5 W
Warranty
Pressalit makes a commitment to remedy material and manufacturing defects for a
period of five years from the invoicing date.
Product
PLUS shower seat 450, electrically height adjustable and sideways
adjustable
Item number
R7664112
Cleaning
PLUS shower seat.
The product is to be cleaned with hot water or a mild soapy cleaning agent.
Do not use chlorine based, corrosive or abrasive cleaners as it may result in the
surface being damaged.
Important: Polyurethane surfaces of PLUS shower seats and PLUS backrests
contains an antibacterial surface, which will be compromised if cleaned with anything
other than soap and water.
The product must be wiped down with a soft rag wrung out in clear water immediately
after cleaning, as some materials may otherwise be discolored and stained, and the
surface coating may deteriorate.
DECALCIFICATION OF ALUMINUM PARTS:
Pressalit recommends that chalky deposits be removed from wall tracks and other
aluminum parts using a solution of three parts 30% acetic acid to seven parts tap
water. When the aluminum parts have been washed down with this solution, the parts
must be wiped over with a damp cloth wrung out in clear water.
Declaration of
conformity
This product is in compliance with all relevant requirements of regulation (EU)
2017/745 on medical devices. It also complies with all relevant requirements in the
Council Directive 2006/42/EC (of 17 May 2006) on machinery and the Council
Directive 2011/65/EC on RoHS.
www.pressalit.com
Other manuals for PLUS shower seat 450
1
This manual suits for next models
1
Other Pressalit Wheelchair manuals
