Prestigio Roadrunner HD1 User manual

Roadrunner HD1 EN - 1
Quick Start Guide
Prestigio Roadrunner HD1
1. Packing List
1. Prestigio car DVR
2. Suction mount
3. DC 5V car charger
4. USB Cable
5. Quick start guide
6. AV cable
2. Device Overview
SD/MMC Card Slot
UP
Microphone
REC / Snap
LED indicator (glows with
green when working and
with red when charging)
Menu
5V DC Slot
ON/OFF Power Switch
Mini USB port
Lens
AV out
Speaker
Reset
Mount hole
Mode Button
2.5 inch LCD
Down
12
17
16
15
14
13
9
8
7
6
5
4
3
11
2
10
1

EN –2 Roadrunner HD1
Quick Start Guide
Prestigio Roadrunner HD1
Getting started
3. Power on/Power off
Position the device in the vehicle and press the Power Switch
to turn it on. Turn the device off by pressing
again.
You can also connect the device to the car charger. It will
automatically turn on and start recording when the car engine starts.
When the engine stops, the device will automatically save the last file
and turn off.
4. Charging
Connect the device to the USB port or car charger. The LED indicator
will glow with red when charging, turn off, when the device is fully
charged and glow with green when recording.
Normally it takes approximately 3 hours to fully charge the device.
Operating the device while charging with the AC adapter may extend
the time of full charge.
Note:
Before using the device for the first time, please, connect it to the PC
or notebook using the USB cable provided to fully charge the Li-ion
battery. The battery is completely charged in 3-4 hours.
Note:
The device can also be charged via car charger. Connect the device to
the car cigarette lighter when the car engine is working.

Roadrunner HD1 EN - 3
Quick Start Guide
Prestigio Roadrunner HD1
5. Inserting the SD-card
Before starting video recording, please, insert an SD or SDHC card
into the SD card slot in the device.
6. Recording
The device will automatically start recording when turned on, and the
LED indicator will start flashing. The recorded files are saved on
SD/MMC Card. To stop recording, press the button or
stop the car engine if the device is connected to the car charger. The
indicator will stop blinking.

EN –4 Roadrunner HD1
Quick Start Guide
Prestigio Roadrunner HD1
Home screen
7. Main menu
During video registration the following symbols are displayed on the
home screen:
Selected mode
Image size
LED indicator (on/off)
REC - Displayed when recording is being performed
Selected file duration (when recording)
The amount of video files, which can be saved on the SD card
(when not recording)
Appears when an SD card is inserted
Battery level
Current time and date
8
7
6
5
4
3
2
1

Roadrunner HD1 EN - 5
Quick Start Guide
Prestigio Roadrunner HD1
Settings
8. Video Mode Settings
Turn on the device and press button to enter Settings. Press
/ to select the settings options and enter the
sub-menu by , select the options by pressing /
, confirm by pressing , afterwards the settings
are saved and the device exits the options menu.
The following options list is available:
Image Size: Select the image size from HD 1280x720 or VGA
640x480
Time stamp: Select to turn time stamp on the images on or off.
Motion detect: After selecting this option the device will
automatically start recording upon detecting any motion.
Note: After enabling this function the device will start recording
automatically if it detects a moving object. The file duration will be set
according to the Recording time settings. For example, if the
recording time is set for 2 min, video recording will last for 2 minutes,
and if there is no movement detected, the device will stop recording,
or continue recording a new file if a movement is still being detected.
Audio record: Select to turn on audio recording.
Recording time: Select the file duration (2 Minutes / 5 Minutes/ 15
Minutes).
Led Mode: Select to choose auto mode or to cancel it.
9. Other Settings
Press to enter “Setup”. Press / to navigate in
the options list. The following settings are available:
Format: Select OK to format the SD card.

EN –6 Roadrunner HD1
Quick Start Guide
Prestigio Roadrunner HD1
Language: Select the desired language from the list.
Default Settings: Select OK to restore the default settings.
Frequency: Select the frequency between 50HZ /60HZ.
Date: Set the correct date.
10.DSC Mode Settings
To enter digital camera settings press button once. To take a
picture press . To enter menu options press button.
Press / to navigate between the options and press
to enter sub-menu. To select options press /
, press to confirm selection. Afterwards the
settings are saved and the device exits the options menu.
The following settings are available:
Image Size: Select the image size between 5M 2560 x 1920, 3M
2048 x 1536, 2M1600 x 1200, 1M 1280 x 1024.
Time stamp: Select to turn time stamp on the images on or off.
Led Mode: Select to choose auto mode or to cancel it.
11.Playback Mode Settings
To enter playback mode settings press button twice, then press
/ to select the recorded file from SD/MMC card and
press to playback. To enter menu options press
button. The following settings are available:
Delete: Select to delete one file, all or cancel.
Show thumbnails: Select to display or hide thumbnails.
Volume adjust: Select to adjust the volume

Roadrunner HD1 EN - 7
Quick Start Guide
Prestigio Roadrunner HD1
12.USB connection
To download registered files on your PC/notebook, please, connect the
device to the PC or notebook via USB-cable provided. In “My computer”
select the removable disk. All registered files are stored in DCIM folder,
under the name PICT**** in AVI format. You can now download the files
from the device.
13. Playback on TV
To playback the recorded files on TV-set connect the device to your TV
with the AV cable provided and then turn on the device. It will
automatically enter the Playback mode. The options are similar to those
of the section 11 (Playback mode).
Notes:
Please insert the SD/ MMC card before recording.
When the SD/MMC card is out of memory, it will automatically erase
the old files and start recording from the beginning. Before rewriting
the old files the device will pause recording for 3 seconds.

EN –8 Roadrunner HD1
Quick Start Guide
Prestigio Roadrunner HD1
Safety precautions
Please observe all safety precautions before using Prestigio Roadrunner
HD1. Please follow all procedures outlined in this manual to correctly
operate the device.
Do not attempt to disassemble or alter any part of the device that is
not described in this guide.
Do not place the device in contact with water or any other liquids. The
device is NOT designed to be liquid proof of any sort.
In the event of liquid entry into interior of device, immediately
disconnect the device from the computer. Continuing use of the
device may result in fire or electrical shock. Please consult your
product distributor or the closest support center.
To avoid risk of electrical shock, do not connect or disconnect the
device with wet hands.
Do not place the device near a heat source or directly expose it to
flame or heat.
Never place the device in vicinity of equipments generating strong
electromagnetic fields. Exposure to strong magnetic fields may cause
malfunctions or data corruption and loss.

Roadrunner HD1 EN - 9
Quick Start Guide
Prestigio Roadrunner HD1
Technical Specifications
Recording
resolution
1280*720/ 640*480 pixels
Video format
Avi
Recording time
2/5/15 minutes
Power source
Built-in rechargeable battery
Interfaces
AV out, USB, SD/MMC card (Support max 32GB,
high-speed SD/MMC card recommended)
Microphone
Built-in
Operating
temperature
- 35°~ 70°C
Disclaimer
As the Prestigio products are constantly updated and improved, your
device may have a slightly different appearance or modified functionality
than presented in this Quick Start Guide.