Prestigio PMP7074B3G User manual

PMP7074B3G EN - 1
1. Packing List
1. Prestigio MultiPad
2. AC Adapter
3. Carrying Case
4. USB Cable
5. Quick Start Guide
6. Warranty Card
7. Legal and Safety Notices
2. Device Overview
Quick Start Guide
Prestigio MultiPad
PMP7074B3G
EN
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

EN –2 PMP7074B3G
Power
Turn on/off the device; Suspend/Activate
the device
Earphone Jack
Earphones connection.
Vol +\ Vol - Button
Adjust the volume level
SIM Slot
Insert the SIM card
Micro SD Card Slot
Insert the Micro SD card
Built-in Microphone
Record sounds or chat with others
Home
Back to the Home screen
Menu
Display menu options.
Return
Back to the previous page
Search
Go to Google home search page directly
Reset
Reset the device if it fails to operate
correctly
USB / DC port
USB / DC connection
Front camera lens
Take photos
Ambient light sensor
Induct the changing light
Flash lamp
Increase light
Back camera lens
Take photos
Getting Started
3. Charging
Insert the AC connector to the DC port on the device and connect the
power adapter to the wall socket for charging.
Normally it takes approximately 3 hours to fully charge the device.
Operating the device while charging with the AC adapter may extend
the time of full charging.
Notice: The device cannot be charged via USB.
4. Power on/Power off
Press and hold the Power Button to turn on the device. It will
automatically enter the Home screen after the start-up screen.
Press the Power Button once to enter sleep mode and press it again
to awake the device.
Press and hold the Power Button, and then tap on Power
off/Standby to power off the device or to enter sleep mode.
16
15
14
13
12
11
10
8
9
7
6
5
4
3
2
1
EN
Quick Start Guide
Prestigio MultiPad
PMP7074B3G

PMP7074B3G EN - 3
5．Inserting a Memory Card
The device supports micro SD/SDHC cards.
To insert a Micro SD card, place the card connector towards the front
side of the device and the printing side of the card towards the rear
side of the device.
To remove the micro SD card, gently press the edge of the card to
release the safety lock and pull the card out of the slot.
To access the files on the memory card, select File icon and tap on SD
Card.
Notice: When you are reading the file from micro SD card, please
don’t remove it, otherwise the device could fail to operate correctly.
6．Inserting a SIM Card
EN
Quick Start Guide
Prestigio MultiPad
PMP7074B3G
Correct
Incorrect
Correct
Incorrect

EN –4 PMP7074B3G
To insert a SIM card, place the metal side of SIM card towards the
front side of the device and the triangular cut of the card will be
inserted into the device.
To remove the SIM card, gently press the edge of the card to release
the safety lock and pull the card out of the slot.
Notice: Don’t insert or remove the SIM card while the device is on.
Please insert or remove the SIM card while the device is off.
7. Auto Calibrate
Please turn off the tablet when you calibrate the touch screen
Press and hold the Volume “-” button on the right of the device and
press and hold the Power button simultaneously to turn on the device.
Release the Power button when the device vibrates, then release the
Volume “-”button when the “Touch Screen Calibration, Don't Touch
The Screen...OK”displays on the screen.
Notice: Don’t touch the screen during the calibration process.
8. Automatic Upgrade
If there is a new system version, a system update dialog-box will pop
up.
Click “download”to download new firmware package. ( This process
will take a long time, please be patient)
When finishing to download the new firmware package, click
“installation”to upgrade your firmware.
Notice:
Ensure that the Micro SD card has been inserted before downloading
the new firmware, and the remaining storage of Micro SD card is more
than 200MB.
During automatic updates the charger should always be connected to
the device in order to avoid power shortage and as a result
interruption of the upgrade process.
New firmware package should be downloaded in a good 3G or WI-FI
network environment.
During upgrade some user data may be lost (installed applications,
call records, etc). Before upgrade please backup the important files.
EN
Quick Start Guide
Prestigio MultiPad
PMP7074B3G

PMP7074B3G EN - 5
9. Connecting to Wi-Fi
Select Settings icon to access the list of options. Select Wireless &
networks.
If the Wi-Fi is off, tap on and switch it to . Then select the Wi-Fi
settings.
The device will scan for available Wi-Fi networks and display them at
the bottom of the screen.
Tap on the network you want to connect to. Then tap inside the
Wireless password field to make the virtual keyboard appear. Enter
the required network information, tap on Done, and then tap on
Connect.
Your device will now attempt to establish a connection to the Wi-Fi
access point with the network parameters you entered. After
connecting to a Wi-Fi network, the icon appears on the status bar
on the right side of the Home screen.
10. Using 3G network
Insert a SIM card, and then select Settings icon to access the list of
options.
Select Wireless & networks, then touch Mobile networks.
If the Data enabled is off, tap on and switch it to .
Select Access Point Names,If you find nothing, please touch Menu
button. Select New APN option, then fill in the information that you
got from the operator of the SIM card.
Select Network operators option, then select the operator of the
SIM card.The icon appears on the right side of the status bar. You
can go on line directly without Wi-Fi now.
11. Transferring content from PC
Connect the device to your PC/Notebook using the USB cable.
Select the content you want to transfer from your PC/Notebook.
Drag the content from the PC/Notebook to the device.
Please do not disconnect the USB cable during loading. It may cause
malfunction of the device and files.
Left click on to disconnect the device and PC/Notebook safely.
Quick Start Guide
Prestigio MultiPad
PMP7074B3G
EN

EN –6 PMP7074B3G
Technical Specifications
Processor
High performance ARM Cortex A8 at 800MHz
RAM
512MB DDR2
OS
Android 2.3 (Gingerbread)
Display
7”TFT LCD, Capacitive multi touch
Resolution
800 x 480 pixels
Storage capacity
4 GB flash memory (2.73GB are accessible by
user), Memory card slot supports micro SDHC card
up to 32 GB
Interfaces
USB 2.0, Sim card, Micro SD (micro SDHC
compatible), USB Host
Communications
Wi-Fi (802.11 b/g/n), 3G(WCDMA), Bluetooth
GPS
On board
GSM Band
HSDPA/UMTS 2100/900 MHz
GSM/GPRS/EDGE 850/900/1800/1900 MHz
Sensor
3-axis-accelerometer
3-axis-compass
Light sensor
Battery
4000 mAh Li-Polymer battery
Dimensions
192*122*12.2 （mm）(L x W x H)
Weight
460 g
Disclaimer
As the Prestigio products are constantly updated and improved, your
device’s software may have a slightly different appearance or modified
functionality than presented in this Quick Start Guide.
Quick Start Guide
Prestigio MultiPad
PMP7074B3G
EN