Presto Lifts XBP68-05 User manual

February 19, 2021
XBP68-05 Owner’s Manual
Presto Lifts Inc.
50 Commerce Way, Norton, MA 02766
Phone: [phone]
Fax: [phone]
www.PrestoLifts.com
Email: [email protected]
Model:
Serial Number: __________________________
Date placed in
service:
__________________________
Portable DC Powered Mortuary Lift

2Presto Lifts XBP68-05 Manual
Contents
1 Introduction............................................................................................................. 4
1.1 Responsibilities of Owner and Users.................................................................................. 4
1.2 Responsibilities of Operators.............................................................................................. 5
2 Safety....................................................................................................................... 7
2.1 Safety Alert Symbols ............................................................................................................ 7
2.2 Signal Words ......................................................................................................................... 7
3 Machine Specications.......................................................................................... 8
4 Labeling................................................................................................................. 10
4.1 Label Placement Diagram .................................................................................................. 10
5 Setup.......................................................................................................................11
5.1 Lift Setup...............................................................................................................................11
5.2 Testing.................................................................................................................................. 12
6 Operation............................................................................................................... 13
6.1 Loading ................................................................................................................................ 13
6.2 Operating the Floor Lock ................................................................................................... 13
6.3 Raising and Lowering......................................................................................................... 14
7 Maintenance & Repair.......................................................................................... 15
7.1 Securing the Lift for Maintenance ..................................................................................... 16
7.1.1 Lifts Equipped Standard or Ball Transfer Platforms ............................................... 16
7.1.2 Lifts Roller Transfer Platforms .................................................................................. 17
7.2 Periodic Maintenance ......................................................................................................... 18
7.2.1 Weekly Maintenance................................................................................................... 18
7.2.2 Monthly Maintenance ................................................................................................. 18
8 Troubleshooting ................................................................................................... 19
9 Electrical................................................................................................................ 20
9.1 Wiring Schematic ................................................................................................................ 20
9.2 Electrical Arrangement....................................................................................................... 21
9.3 Battery Charging................................................................................................................. 22
10 Hydraulics ........................................................................................................... 23
10.1 Hydraulic Fluid .................................................................................................................. 23
10.2 Hydraulic Schematic......................................................................................................... 23
10.3 Hydraulic Arrangement .................................................................................................... 24
11 Warranty & Contact Information ....................................................................... 25

3Presto Lifts XBP68-05 Manual
Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
WARNING
This label (part # 10095524) is
required by California Law. For
more information visit:
www.P65Warnings.ca.gov

4Presto Lifts XBP68-05 Manual
1. Introduction
1.1 Responsibilities of Owner and Users
Basic Principles - Owners/users shall apply sound principles of safety, training, inspection,
maintenance, and expected operating environment. It shall be the responsibility of the owner/user
to advise the manufacturer where deection may be critical to the application.
Manuals - Owners/users shall keep and maintain a copy of the operating and maintenance
manual(s) and ensure its availability to operating and maintenance personnel.
Inspection and Maintenance - It shall be the responsibility of the users to inspect and
maintain the machine as required to ensure proper operation. The frequency of inspection and
maintenance shall be based upon the manufacturer’s recommendations and be compatible with
operating conditions and the severity of the operating environment. Machinery that is not in proper
operating condition shall be immediately removed from service until repaired. Maintenance and
repairs shall be made by a qualied person and the repairs shall be in conformance with the
manufacturer’s recommendations.
Maintenance Safety Precautions - Before adjustments and repairs are started on the machine,
the following precautions shall be taken as applicable:
1. Remove the load from the platform.
2. Lower platform to the full down position.
3. Relieve system pressure from all circuits before loosening or removing any components.
4. All controls in the “o󰀨” position and all operating features secured from inadvertent motion
by brakes, blocks, or other means.
5. Disconnect power and follow established owner/user lockout/tag out policies.
6. Follow precautions and directions as specied by the manufacturer.
Replacement Parts - When parts or components are replaced, they shall be replaced with parts
or components approved by the original manufacturer.
Maintenance Training - The user shall ensure only qualied personnel inspect and maintain the
machine in accordance with the manufacturer’s recommendations.
Operator Training - An owner/user, who directs or authorizes an individual to operate the
machine shall ensure that the individual has been:
1. Trained in accordance with the manufacturer’s operating manual.
2. Made aware of the responsibilities of operators as outlined in section 1.4 of this manual.
3. Retrained, if necessary, based on the owners/user’s observation and evaluation of the
operator.
Modications and additions shall not be performed without the manufacturer’s prior written
approval. Where such authorization is granted, capacity, operation, and maintenance instruction
plates, tags, or decals shall be changed accordingly.

5Presto Lifts XBP68-05 Manual
1.2 Responsibilities of Operators
Basic Principles - Operators shall apply sound principles of safety and good judgment in
the application, and operation of the machine with consideration given to its intended use
and expected operating environment. Since the operator is in direct control of the machine,
conformance with good safety practices is the responsibility of the operator. The operator shall
make decisions on the use and operation with due consideration for the fact that his or her own
safety as well as the safety of other personnel on or near the machine is dependent on those
decisions.
General Training - Only personnel who have received general instructions regarding the
inspection, application, and operation of machine, including recognition and avoidance of hazards
associated with their operation, shall operate the machine. Such topics covered shall include, but
not necessarily be limited to, the following issues and requirements:
1. A pre-start inspection
2. Responsibilities associated with problems or malfunctions a󰀨ecting the operation of the
machine
3. Factors a󰀨ecting stability
4. The purpose of placards and decals
5. Workplace inspection
6. Safety rules and regulations
7. Authorization to operate
8. Operator warnings and instructions
9. Actual operation of the machine. Under the direction of a qualied person, the trainee shall
operate the machine for a su󰀩cient period of time to demonstrate prociency in actual
operation of the machine.
Pre-start Inspection - Before use each day or at the beginning of each shift, the machine shall be
given a visual inspection and functional test including but not limited to the following:
1. Operating and emergency controls
2. Safety devices
3. Hydraulic system leaks
4. Electrical cables and wiring harness
5. Loose or missing parts
6. Nameplates, precautionary and instructional markings and/or labeling
7. Guarding system
8. Items specied by the manufacturer
Problem or Malfunctions - Any problems or malfunctions that a󰀨ect the safety of operations shall
be repaired prior to the use of the machine.
Before Operations - The operator shall:
1. Read and understand the manufacturer’s operating instruction(s) and user’s safety rules or
have them explained.
2. Understand all labels, warnings, and instructions displayed on the machine or have them
explained.