Priefert Calf Table User manual

1
CALF TABLE REVERSAL INSTRUCTIONS
CALF TABLE (CT) SHOWN W/ STANDARD
HEADGATE CONFIGURATION.
CALF TABLE (CT) SHOWN W/ REVERSED
HEADGATE CONFIGURATION.

2
CALF TABLE REVERSAL INSTRUCTIONS
Step 1: Remove the Cotter Key from the Slip
Rod and slide the rod out of the hole.
Step 2: Slide the other end of the rod out of
the Latch Handle to remove it completely from
the assembly.
Step 3: Remove the Spring from the Latch
handle, then remove the Latch handle from
the Trigger box.
Cotter Key
Slip Rod
Latch Handle
Spring
Trigger Box

3
CALF TABLE REVERSAL INSTRUCTIONS
Step 4: Remove the (2) 1/2”x1” bolts
attaching the Headgate Guide to the
Headgate.
Step 5: Remove the Headgate Guide from
the assembly.
Headgate Guide
1/2”x1” Bolt
Headgate

4
CALF TABLE REVERSAL INSTRUCTIONS
Step 6: Remove the 5/8”x3½” bolt and
Washer attaching the Headgate to the (CT)
Floor.
Step 7: Remove the Headgate from the
assembly, and move it to the other side of the
Calf Table.
Note: The orientation of the Headgate is the
same in both Standard and Reversed
configurations.
Headgate
5/8”x3½” Bolt
Washer
(CT) Floor

5
CALF TABLE REVERSAL INSTRUCTIONS
Step 8: Insert the 5/8”x3½” bolt and washer
into the Headgate and secure it to the (CT)
Floor.
Step 9: Align the holes in the Headgate
Guide with the holes in the Headgate and
secure it with the 1/2”x1” bolts.
Headgate Guide
5/8”x3½” Bolt
Washer
Headgate
(CT) Floor
1/2”x1” Bolt

6
CALF TABLE REVERSAL INSTRUCTIONS
Step 10: Insert the Latch Handle into the
Trigger Box and attach the spring.
Step 11: Slide the Slip Rod into the hole in
the Latch Handle. Insert the Slip Rod into the
hole at the bottom of the Headgate, and
Secure it with the Cotter Key. This concludes
the Calf Table Reversal Process.
Latch
Handle
Thank you for
choosing a Priefert ™
Product.
Spring
Trigger Box
Slip Rod
Headgate