Primi Sogni Bunny User manual

INSTRUCTIONS FOR USE
High Chair
WARNING: Do not leave the child unattended.
The children should have the harness correctly putted and
fitted.
WARNING: Do not use the high chair unless all components
are correctly fitted and adjusted.
Keep away from the risk of open fire and other sources of
strong heat, such as electric bar fires, gas fires, etc. in the
vicinity of the high chair.
Do not use the high chair until the child can sit up unaided.
Do not use the high chair if any part is broken, torn or missing.
INSTRUCTIONS FOR ROUTINE MAINTENANCE AND CLEANING
Coating composition:
Clean the coating and metallic parts with humid cloth or sponge.
Read these instructions carefully before use. Your child's
safety may be affected if you don't follow these instructions.

ASSEMBLY INSTRUCTIONS
A. Frame assembly
1.Remove frame from packaging.
2.Press both red buttons on the rear
tube and slide them down to open
the rear tube.
3.Put front and rear tube into plastic
base side with screw holes inside and
fix4screwsasdrawing.
B. Seat assembly
1.Hook the seat onto the seat support
located on top of frame ( ensure that
two female slots of seat support are
aligned with corresponding male pieces on seat).
2.Secure seat with axel rod and attach clips on
correct side.
3.To install footrest, starting from the left, insert
part of footrest, and then insert other part of footrest
on the right side. Continue simultaneously left to right
until footrest in inserted completely.
C. Wheel and footrest fixation
1.Turn frame to side position.
2.Remove wheels from packaging.
3.Fix the two base legs on the front part of the frame on the
basement plastics.
4.Fix the two wheels at the rear part of the plastic base.
5.The wheels are including brakes.
D. To install and operate tray
1.Grab either side of tray adjustment levers and pull out.
2.Tray has three-position adjustment mechanism and can
therefore be adjusted to three different positions.
3.The tray can be removed and hanged up on the red buttons
located on the rear tube as drawing.
E. To recline the backrest (3 positions)
1.Pull the backrest adjustment lever upwards to release the
backrest find the most suitable position and release the lever
to secure the backrest in the required position.
2.The backrest can be adjusted while your child is on the seat.
F. To adjust the height of the seat (5 positions)
1.Stand in front of the high chair. Press the two red buttons
found under the seat at the same time, and place the seat to
the desire position. Release the buttons to secure the seat at
the required height.
2.To adjust the seat to the highest positions: one hand hold
the frame housing, the other hand hold the lever on the top
of backrest and pull it upwards to required position. This
adjustment your child can sit in the chair.
G. To fold the high chair
1.Unfasten the restraint harness and remove your
child from the high chair.
2.Remove the tray and hang it up on the rear tube.
3.Stand behind the high chair, move your body
down and press two red buttons found on either
side of rear tube and push the rear tube forwards
until an audible click is heard to indicate that the
high chair is secured in the closed position.