Pro's Kit GE-730 Installation guide

SPRINGscience
kit
Manual
Assembly Instruction
&
產品介紹 Product Introduction
Have you ever wondered the power source of a wind-up car? Where does the clock ticking sound of
dad’s mechanical watch come from? The secret lies in the mainspring. Centered on the clockwork there
is a spiral torsion spring. We can store the energy by winding it tightly, and then release it to trigger the
inner mechanical operation. When the spiral spring is totally untwisted, the operation then stops. The
mainspring of this 3-in-1 science kit is the first one in the world made of plastic, instead of metal. Unlike
metal springs usually hidden in gearboxes for safety concern, this plastic one is safe enough to be
completely exposed even with its highest running speed, giving kids great opportunity to explore the
fascinating clockwork mechanism.
This kit can be disassembled and reassembled into 3 styles: car, robot, and timer. Car: wind-up tightly
and then release. The car will run at full speed surprisingly up to 14 meters. Show your friend how fast it
can go. Lose a race game? Not a chance! Robot: the spiral spring works with high-speed escapement,
providing the robot steady power to walk 50 centimeters. Waddling around with his quirky face, you will
find him as the funniest and most hilarious buddy ever! Timer: the spiral spring works with low-speed
escapement, performing as a 6 minute countdown timer with ticking sound. Check out when the
chocolate cake in oven will be ready, or your favorite TV show is coming up? This helpful device won’t
let you miss any fun in your life! The innovative science kit is amazingly easy to assemble and more
importantly- environmental friendly. No motor, no battery, even no screw required, the only thing you
need is a diagonal cutter to help you build up the entire piece.
組裝說明手冊
你玩過發條車嗎?那你知道發條車是如何驅動的呢?爸爸的機械錶總有滴答、滴答的聲音又是怎麼來的呢? 這些秘密就藏在彈簧裡 –
在發條裝置的中心設有一個螺旋彈簧，當我們旋緊這彈簧時，同時也是在儲存動能，而一旦釋放被旋緊的彈簧，動能也將被釋放並
軀動裝置!
不須馬達、不用電池，就連螺絲也不需要，只要一把斜口鉗，利用你的巧手與觀察力，你會發現這組套可以拼裝、拆裝再拼裝成3
種造型-發條機器人、跑跑發條車、滴答計時器。旋緊彈簧後釋放，跑跑發條車將出乎你意料之外地馳騁14公尺，讓你想輸都難!呆
萌可愛的發條機器人，走起路來雖然搖搖擺擺，但旋緊一次發條再釋放動力，他可是可以前進50公分呢!蛋糕需要烤多久才好? 最
愛的電視節目再六分鐘就要開始，將GE-730組成六分鐘滴答計時器，再也不用愁了!
三合一英倫發條時鐘先生
GE-730

....................................................................... 1
................................................................... 1
........................................................................... 2
........................................................... 2
............................................................ 5
......................................................................................... 54
注意事項 Warning
........................................................................... 56
故障排除 Trouble Shooting
自備工具 Tool You May Need
零件清單 Mechanical Parts List
塑膠模型零件 Plastic Parts
小技巧提醒 Read It Before Assembly
小零件收納技巧 Small Parts Bagging Tip
.................................... 16
................................................................... 20
.................................................... 21
遊戲方式 How to Play
拆裝技巧 Disassembly Tips
跑跑發條車組裝 Spring Car Assembly
................................................................. 30
遊戲方式 How to Play
.................................................. 33
拆裝技巧 Disassembly Tips
...................................................... 37
身體組裝 Body Assembly
........................................................... 49
遊戲方式 How to Play
................................................... 50
拆裝技巧 Disassembly Tips
..... 51
身體與螺旋彈簧結合方式 From Body to Spiral Sping Drive
發條機器人組裝 Spring Bot Assembly
螺旋彈簧驅動器(發條)組裝 Spiral Spring Drive Assembly
螺旋彈簧驅動器(發條)測試 Sprial Spring Drive Testing
....... 6
........... 14
目錄
Contents
................................ 22
滴答計時器組裝 Spring Timer Assembly

P3
5 pcs 1 pc
P4
圓軸(長)
Round Shaft (Long)
P2
P1
1 pc 4 pcs
圓軸(短)
Round Shaft (Short)
P5 P7
1 pc
泡棉貼
Sponge
P6
P8 P9 P10
1 pc
圓軸(中)
Round Shaft (Medium)
圓軸(極短)
Round Shaft (Small)
1 1 1 1 1
1 1 1 1 1
2 2 2 2
2 2 2 2 3 3
1
Please keep the bag for Sponge. It will be used later to keep
the other small parts.The bag is numbered P10.
六角軸(短)
Hex Shaft (Short)
六角軸(長)
Hex Shaft (Long)
螺旋彈簧
Spiral Spring
游絲
Hairspring
夾鏈袋
Zipper Bag
1:1 1:1
1:1
1:1
1:1
1:1
Mechanical Parts List零件清單
Product contains functional edges and sharp points.
部分產品含有銳利邊角，組裝時請特別注意
警告
1.本玩具內含小物件，請勿讓三歲以下孩童取得，以免放入口中造成窒息。
2.兒童使用剪切工具時，請家長指導使用方式，並請在家長監督下使用，以免發生意外。
3.為避免嬰兒或兒童產生窒息的危險，請於拆卸後立即將塑膠袋銷毀或遠離嬰兒及兒童。
Choking hazard - Small parts. Not for children under 3 years.
Adult supervision is recommended when children use scissors.
To avoid danger of suffocation, keep the plastic bag away from babies and children.
Warning
自備工具 Tools You May Need
Diagonal Cutter
斜口鉗(寶工型號: PM-200 或PM-202)
請保留泡棉貼之夾鏈袋(編號P10)，以作為收納其他小零件之用

去除毛邊 Remove burrs
2
Trim off the burrs ONLY. Do not
trim off the protrusion belonged
to original plastic parts.
All features of parts should be
kept completely.
組裝注意事項 Read It Before Assembly
Please read through and follow the tips below before assembly.
在開始組裝前，請仔細閱讀以下說明
C 黃色 (Yellow)
D 藍色 (Blue)
E 白色 (White)
Unnecessary burrs
Please note C24 is a spare part.
塑膠模型零件 Plastic Parts
Cut the plastic parts when they are required.Do not cut them in advance.
請依照組裝步驟將所需的零件剪下，事先全數剪下會在組裝時造成混淆.
請注意: C24為備品
Must-know
組裝前需知
Unnecessary
burrs
毛邊
Unnecessary
burrs
毛邊
毛邊
Correct
正確
Incorrect
錯誤
Incorrect
錯誤
請勿過度剪切非毛邊的塑膠零件，
以免組裝不確實，導致運作不良
MADE IN TAIWAN
123
45
789
10 11 12
13
14 15
16
17
18 19 20
21
22
23
24
28
27
29
26
25
6
C
Spare
MADE IN TAIWAN
1
2
3
4
5
78
9
10
11
13
14
15
16
17 18
19
20 21
22
23
27
26 25
6
D
24
12
E
MADE IN TAIWAN
12
1
2
3
3
4 4
5
5
7
8
9
10 11
11
13 14
15
16 17
6
12 12

D14使用方式 Function of D14
使用中間(如圖圈起處)拉起E3
使用D14一字端安裝/卸除C28與E12
拉起
安裝C28與E12 Assemble C28 and E12
卸除C28與E12 Disassemble C28 and E12
3
E3
C28 & E12
PULL
PULL
Use the middle part to pull E3
Use the tip to rotate C28 & E12
1
2
90°
Rotate
順時針旋轉90°
90°
Rotate
逆時針旋轉 90° PULL
拉起

注意事項 Warning
4
Do not rotate C2 counter-clockwise.
Do not pull hard. It may break P8.
請勿過度拉拔螺旋彈簧，以免造成損壞
請勿過度拉拔游絲，以免造成損壞
請勿逆時針旋轉C2
P8
P9
C2C2
Do not pull hard. It may break P9.
Use the tail to rotate C24
1
2
安裝C24 Assemble C24
卸除C24 Disassemble C24
C24
使用D14開口端安裝/卸除C24
90°
Rotate
順時針旋轉 90°
90°
Rotate
逆時針旋轉90°
Correct
正確
錯誤
Incorrect
錯誤
Incorrect
錯誤
Incorrect
錯誤
Incorrect

5
小零件收納技巧 Small Parts Bagging Tip
C19
C6 E7
D20
P5
C3
C1
D14
E9E2
手部
HAND
右
R
手部
HAND
左
L
錶面 Clock Surface
Front Wheel Parts
Head
C22
C29
D4
P10
Color Box
E16
C7
E3
D9
Low Speed Escapement
慢速擒縱機構
Spiral Spring
DRIVE
螺旋彈簧驅動
器(發條)
頭部 前輪
Rear Wheel Parts
後輪
包裝外盒

6
1 2
3
Click
咔噠
Cut off the burrs
before assembly.
C16
P6
D10
E15
螺旋彈簧驅動器(發條)安裝 Spiral Spring Drive Assembly
1 : 1
E17
C15
C15
Correct
正確 錯誤
Incorrect
組裝前請將毛邊剪切乾淨

4 5
6
7
C17
D11
P1
D19
1 : 1
Cut off the burrs before assembly.
C17
D11
Correct
正確 錯誤
Incorrect
Correct
正確 錯誤
Incorrect
Correct
正確 錯誤
Incorrect
錯誤
Incorrect
burr
毛邊 burr
毛邊
burr
毛邊
burr
毛邊
組裝前請將毛邊剪切乾淨
Cut off the burrs before assembly.
組裝前請將毛邊剪切乾淨

7
9
8
8
1 : 1
Cut off the burrs before assembly.
E12
C4
P3
1 : 1
C20
Use the tip of D14 to rotate E12.
使用D14的一字端安裝E12
Correct
正確 錯誤
Incorrect
組裝前請將毛邊剪切乾淨
burr
毛邊
burr
毛邊
Cut off the burrs before assembly.
組裝前請將毛邊剪切乾淨
C17
C4
D11
C20

9
10
11
12
13
14
1 : 1
E12
P2 x2
E6
1 : 1
C28
1 : 1
使用D14的一字端安裝E12和C28
Use the tip of D14 to rotate E12 & C28.

16
10
15
C24 x3
D17
正視圖 Front View
90°
請將 D8 壓至底 Please press D8 down firmly.
Correct
正確 錯誤
Incorrect
D8

11
17
18
19
Use the tail of D14 to rotate C24.
Use the tail of D14 to rotate C24.
C24 x2
D16
180°
使用D14的開口端安裝C24
使用D14的開口端安裝C24
Correct
正確 錯誤
Incorrect
Correct
正確 錯誤
Incorrect

13
21
22 23
TOP
1 : 1
D1
C28 x2
1
2
2
2
1
“TOP” sign should be placed on top.
Use the tip of D14 to rotate C28.
“TOP” 標示應朝上
Correct
正確
錯誤
Incorrect
使用D14的一字端安裝C28

14
24 25
PUSH
Switch the button from “1” to “0” to
block the movement.
90°
螺旋彈簧驅動器(發條)測試 Spiral Spring Drive Testing
1
C9 C2
Spiral Spring
Drive
螺旋彈簧驅動
器(發條)
往上推
將開關切換到”0”以利停止運轉

15
3
PUSH
OK
Run
2
Rotate the knob clockwise one full turn.
Switch the button from “0” to “1” to
activate the operation.
Do not rotate the knob counter-clockwise,
or you could break it.
請勿逆時針旋轉，以免損壞
將開關切換到”1”以利開始動作
順時針轉一圈
錯誤
Incorrect
往下壓
轉動

16
1
2
4
3
C25
D13
P2 x2
C11
C8
D12
跑跑發條車組裝 Spring Car Assembly
1 : 1
1 : 1
1 : 1
1 : 1
錯誤
Incorrect
Correct
正確 錯誤
Incorrect
Correct
正確
錯誤
Incorrect
Spiral Spring
DRIVE
螺旋彈簧驅動
器(發條)

Please press the center of
wheels only, not the rim.
請朝輪胎中心緊壓，勿壓輪框
5
6
17
x2
泡棉貼 P7 Sponge
1 1 1 1 1
1 1 1 1 1
PUSH
PUSH
PUSH
C10
P7– 1
P7– 1x4 後輪 Rear Wheel
後輪 Rear Wheel
PUSH PUSH
PUSH PUSH
1 : 1
Correct
正確
錯誤
Incorrect
壓壓
壓壓
壓
壓

18
7
90°
側視圖 Side View
俯視圖 Top View
C14
C13
1
2
3
PUSH
Correct
正確 錯誤
Incorrect
Correct
正確
壓至底
錯誤
Incorrect