Pro's Pro challenger I User manual

PRO’SPRO ®CHALLENGERI
Seite1 von5
CHALLENGER
STRINGINGMACHINE
MANUAL
Installation&Operation
TableofContents
1TABLE OFCONTENTS...........................................................2
2DESCRIPTIONOFPARTS......................................................3
3ASSEMBLYINSTRUCTION................................................4
4STRINGINGTHEFRAME...............................................6
5CLAMPBASEADJUSTMENT................................................8
6PREPARATIONOFSTRINGING...........................................9

PRO’SPRO ®CHALLENGERI
Seite2 von5
PRO’SPRO®—CHALLENGER
•DescriptionofParts
1.AssemblyInstruction
Step1: Afteropeningthebox, removetheinstallationandoperationmanual.
Theangledsupport(8),Thestringclamp(9), FourL-Shapedwrenches,Long
nosepliers(17)and diagonalcuttingpliers. Removethefoambox, Removethe
machinefromthefoambox .
Step3: Rotatethemounting tableand liftthetensionbar.
1)MachineBase
2)LinerStringGripper
3)Tension BarDrum
4)RatchetSystemwithclutch
5)Latch
6)Drop WeightKnob
7)Drop Weight
8)Tension Bar
9)Tension BarEnd Cap
10)Sidesupportarm
11)AngledSupport
12)String Clamp
13)FrameSupport
14)MountingTable
15)SwivelBase
16)3.0 m/ml-shapedwrench
17)4.0 m/ml-shapedwrench
18)5.0 m/ml-shapedwrench
19)6.0 m/ml-shapedwrench
20)LongNosePliers
21)DiagonalCuttingPliers
9 7
6
83
4
5
2
1
15
14
13 12
11 10
16 17
18 19 20 21

PRO’SPRO ®CHALLENGERI
Seite3 von5
Step4: Takethedropweightknob andinsertintotheholeofdropweight.
Step6:Takethe5m/ml-shapedwrenchtoadjustthescrewforappropriate
position. Donotpositionthescrewonthetensionbarsticker.
2. Stringingtheframe
Step5:
Step1: Inserttheangleframe
supportsintotheappropriateslots
locatedon theendofthemounting
arms. Thetwoslotsaredesignedto
accommodatemostracquets.

PRO’SPRO ®CHALLENGERI
Seite4 von5
Step2: Makeadjustmentsbyturningthefineadjustmentknobs. Thefit should
besnug.Turnthemountingarmadjustmentknobssothattheangledframe
supportsfit upagainsttheframe.Thefit shouldbesnug,butusecaution.
NOTE:Over-tighteningcancauseprematurestress ontheframe.
Step3: Correctthelocationoftheknob anddropweight.
Step5:Afterthetensionbarisinhorizontalpositionthestringispulledwith
therighttension.Securethestring withtheclamp.Thenpushthelatch
downwardand movethetensionbarupwardto beabletoreleasethestring from
thestringgripper.Attention:ifyoudonotpushdownthelatchit isimpossible
toreleasethestring.
3. Clampbase adjustment
Locatetheblackcaponthe
backsideoftheblackbase.
Carefullypull it off.

PRO’SPRO ®CHALLENGERI
Seite5 von5
4. Preparationof
Stringing
Toclampthestring,squeezethetoggleto
close.
Toreleasethestring,pull thetoggleto
open
Turntheswivelbasesothatthe
outerportisalignedwiththe
innerport.Takethe3m/ml-
shapedwrenchandinsertinto
theinternaladjustmentscrew.
Turnclockwisetoincrease
tension. Theideallocking
positionforthelevershouldbe
downthecenteroftheswivel
base
Totighten, turnthedialclockwise.
T
o
loosen, turnthedialcounter-
clockwise.
NOTE:Beforestringingaracquet, the
tensiononthestringclamphastobe
adjustedinaccordance withthetypeof
stringgaugebeingused.If thestringisof
athingauge(16L17 18)thenthestring
clampmayneedtobetightened. Ifthe
stringgaugeisthick(15 15L16)thenthe
stringclampmayneedtobeloosened.