Pro Shop LED LitePAR Quad Pro 12 User manual

pro ~!AR Quad Pm 1~11
J User Manual
)
LED LitePAR Quad Pro 12
12 High Powered Tri-Colour LEDs
www.showtech.com.au
---------t( 1 )1---- - ----

'r
o
P.!ARQu'dPml~11
Table of Contents
1. Safety instructions.. .. ............. .. ....... .. .. .............. .. . .. . .. . .. ....... .. .. 3
1.1 Over
head riggi ng .......................... .. . .. ... .. ............... .. . .. .....4
1.2 Power Connection ..
.. ............ .. . .. ........ .. . .. ..... ... ........ .. ... .. ..6
1.3 Cl
ean in g and Ma i ntenance ..... .. .. .. .. .. ........... .. .......... .. ....6
2. Menu Navigation .. ............................ .. . .. .........................7
3. DMXA
ll ocat ion ..............................................................8
4. Techn
ic al Speci fi cati ons ......... .. .............. .... .....................10
---- ----I( 2 )1---------
'r
o
P.!AR Qu ,d Pm , ~ II
1. Safety Instructions
FOR SAFE ANO EFF ICIENT OPERA TI ON
Be careful with heat and extreme temperature.
Avoid exposing it to direct rays of sun near a heating appliance.
Do not put it in a temperature be low 41"F/SoC, or exceeding 95°F/35°C.
Keep awa y from humidity, water and dust .
Do not p la ce the se t in a location with a high humidity or lots of dust.
Containers with water should not be placed on the set.
Keep away from sources of hum and noise
Such as transformer motor, tuner , TV set and amplifier.
To avoid placing on un-stable location
Select a level and stable location to avoid vibration.
Do not use chemicals or volatile liqui ds for cleaning
Use a dry cloth to wipe off the dust, or a wet soft cloth for stubborn d irt.
NO USER SERVICABLE PARTS INSID E.
If unit is out of service please contact your po int of purchase.
If any troubles arise, remove the power plug and contact your Pro Shop
representative for repair. Do not open the cabinet byyourself, it might result a
danger
of electric shock.
Ta ke care with the power cable. Never pull the power cab le to remove the plug from
the receptacle, be sure to hold the plug.
---------4[ 3 )1-------- -

'r
o
~!AR Quad Pm 1~11
When not us ing the unit for an extended period of time be sure to disconnect the
pl ug form the receptacle.
1.1. Overhead Rigging
This i tem must be bu ilt in a way that it can hold 10 times more of its we i ght for 1
hour wi thout causing any damages.The installation must be secured with a
secondary safety attachment. The Safety attachment has to be constructed in a way
that no part of the install at ion can fall down. When ri gg ing, de-rigging or servicing
the fixture staying in the area below the installation place, on bridges, under high
wor king places and other endangered areas us forbidden. Before taki ng the device in
operation, the insta lla tion must be approved by an expert. The operator has to make
sure that safety-relating and machine-techni ca l installations are approved by a sk ill ed
person once a year.
IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENS I VE E XPERI ENCE .
Including (but not limited to) calculating working load limits, install at ion mater ial
being used, and periodic safety inspection of all installation mater ial and the
projector. If you lack these qualifications, do not attempt the installations yourself,
but instead use a professional structural rigger. Improper installation can result in
bod
ily injury and/or damage to property .
Use only professional trussing system if the i tem shall be low ered from the ce iling or
high joists. Never l et the dev i ce swing freely in a room.
CAUTION: Overhead Items may cause serious injuries when crashing down! ! If there
is concern about the safety th en DO NOT INSTAll the devi ce .
------ - ---t( 4 )1--- - ----
DANGER OF FIRE!
When installing the device, ma ke sure there is no highly-flammable material
(decoration
art icles, etc) within a distance of min. O.5m.
Mount the projec tor wi th the mounting bracket to your trussing system us ing an
appropriate clamp.
For overhead use, always install a safety-rope
that ca n hold at least 10 times the
weight of the fixture. You must only use safety -ropes wi th quick links wi th screw cap.
Pu ll the safety-rope through the hole in the mount ing bracket and over the trussing
system or a safe fixation spot. Insert the end in the quick link and tighten the safe ty
screw. The maxi mum drop distance must never exceed 20cm
A safety rope which a lr eady held the strain of a crash or wh i ch is defective must not
be used aga in.
DANGER TO LIFE!
Before taking into operat ion for the first t im e, the installation has to be approved by
an expert.
---------i( 5 )l-- -- - ---

'r
o
P.!AR Qu,d P,o 1~ II
1.2. Power Connection
!! CAUTION !!
Never leave this device running unattended !! Every person that is involved wi th th is
item has to be qualified!!
Connect i tem with main plug.The voltage and frequency must exactly be the same as
stated on the device. The power plug must always be inserted wi thout force.
1.3. Cleaning and Maintenance
Please make sure that safety-relating and machine-technical insta ll ations are
inspected
by askilled person once a year.
1. Make sure before installing that a ll screws are tightly connected and not corroded.
2. There must be no
def ormations on the housings, fix a ti ons and insta ll at ions spots
3. No damages must be showed on the po wer supp ly cables, mater ial fat igue and
sediments
If the exteri or of the unit is going to be cleaned, please use mo ist, li nt free cloths.
Never use alcohol or so lvents.
The Coo li ng fan must be cleaned monthl y and check to ensure it is free of
obs truct ions.
To clean the inter i or of the dev i ce please use a vacuum cleaner or an a ir jet , howe v er
we recommend cleaning the lenses week ly to ensure the best output from y our unit.
-- --------l( 6) t- -------
1
}
1
J
'r
o
~t!AR Qu,d Pm 1~ II
2.0 Menu naviga ti on
Menu Level 2 Leve l 3
Auto 1 Speed 0-100
Auto 2 Speed 0-100
Auto Auto 3 Speed 0-100
Auto 4 Speed 0-100
Auto 5 §peed
0-100
Static Fix C
RG BW
Manu C R (0-255), G (0-255 ), B (0-255), W (0-255)
Dim Off
Dim mode
Dim 1
Dim 2
Dim3
ON
Back Lite
lOS
20S
30S
Test
Info Fix Hours
Version
Address ( DMX address) 1-512
10 ch set max dmx address to 503
Channel (personality) 5 ch set max
dmx address to 508
4 ch set max dmx address to 509
Master /Slave
Master
Slaver
Wh ite Balance Balance R (125-255). G (125-255), B ( 125 - 255 )
--------;( 7) t- --- ----

'r
o
P.J!AR Quad Pm 1~11
'r
o
P.!ARQuadP'Ol~11
3.0 DMX Allocation
151 -170 R100-0%
G100-0 % B100% W 0- 100%
171-200 R100% G100%
B1 00% W100%
4CH MODE 201-205 Colour Temperature 1 Warm
CHANNEL VALUES FUNCTION 206-210 Colour Temperatu
re 2
1 000·255 Red 0- 100% 211-215 Colour Temperature 3
2 000-255 Green 0- 100% 216-220 Colour Temoerature 4
3
00G-2 55 Blue 0- 100% 221-225 Colour Temperature 5
4 00G-255 White 0- 100% 226-230 Colour Temperature 6
2
31 -235 Colour Temperature 7
5CH MODE: 236-240 Colour Temoerature 8
CHANNEL VALUES FUNCTION 241-245 Colour Temperature 9
1 000-255 Master Dimmer 0- 100% 246-250 Colour Temperature
10
2 000-255 Red 0- 100% 251-255 Colour Temperature
11 Cool
3 00G-2 55 Green 0- 100%
4 000-255 Blue 0
-1 00% 7 000-010
No function
011 -255 Strobe Slow -Fast
5 00G-255 White 0- 100% 000-051
No function
10CH MODE:
CHANNEL VALU ES FUNCTION
1 000-255 Master Dimmer 0- 100%
2 000-255 Red 0 -1 00%
3 00G-255 Green
0-100%
4 000-255 Blue 0- 100%
0
52-1 01 Show 1 (Auto program 1)
8 102-152 Show 2 (Auto program 2)
153-203
Sh ow 3 (Auto program 3)
204-254 Show 4 (Auto program 4)
255-255 Show 5-(Auto program 5)
9 000-255 Show Speed
0-100% (C H8 @ 0 52 -255)
000-
051
Built-in Dimmer
5 000-255 White 0- 100%
6 000-010 No functi
on
10 052-152 Dimmer 1
153 -2 03 Dimmer 2
011-030 R100% G 0- 100% BO 204-255 Dimmer 3
031 -050 R100-0% G100% BO
051 -070 RO G100% B 0- 100%
071-090 RO
G100-0 % B 100%
091 -110 RO- 100%
GO B 100%
111-130 R100%
GO B 100-0%
131-150
R1 00% G 0- 100% B 0- 100%
---- ---------t( 8 )1---- ----
------------!( 9 )1----- ---

'r
o
M!AR Quad Pm 1~11
4.0 Technical Specifications
Power supply: 100 -240 V AC, SO/60 Hz
light source: 12 x 8W (SOOmA x 4)
Quad-colour RGBW LEDs SO , OOOhrs
Beam angle: 2S ·
Power consumption:
120W
Equipped with Neutr ik PowerCon i n/out
AC power: 100V-240V SO/60Hz
Weight: 2.5kg
-------- ------~(lO)r------------ ---