PRO SIGNAL PSG3396 User manual

IR Repeater Kit with Gain Control
PSG3396
IMPORTANT SAFETY INFORMATION
Please read these instructions carefully before use and retain for future reference.
When using electrical appliances basic safety precautions should always be followed.
• To prevent re or shock hazard, do not expose this product to rain or moisture.
• Only use the PSU supplied or one of identical specication.
• Check that the voltage indicated on the PSU rating plate corresponds with that of
the local network before connecting to the mains power supply.

INSTALLATION
• Provides one IR receiver input and six IR emitter outputs (4 IR emitters included).
• Works with all major brands of Audio/Video IR remote controls.
• Conrmation LED indicator.
• 3.5mm Jack sockets for receiver and emitters
• Terminal block for connecting IR receivers without 3.5mm jack plug.
• Powered by 12V, 500mA AC/DC adaptor (supplied).
• RJ45 expansion socket to connect additional repeaters.
OVERVIEW
• Connect the IR receiver (with red jack plug) to the IR in socket and ensure it is in
line of sight to the remote control.
• If using a wall mounted IR receiver (not supplied) connect this to the IR connector
block.
• Connect the four IR emitters to any sockets 1 - 6 and using the self adhesive strips
on the base of the emitter, after testing the location, attach in line of sight to the
destination equipment IR receiver.
• Connect the PSU 12VDC jack to the power input socket, plug the PSU into the
mains supply and turn on the power and the red LED will illuminate.
• Adjust the gain for each IR emitter as required using the rotary controls.

INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL & ELECTRONIC
EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste Electrical & Electronic Equipment (WEEE).
Any WEEE marked products must not be mixed with general household waste, but kept separate for the treatment,
recovery and recycling of the materials used. Contact your local authority for details of recycling schemes in your area.
Made in Taiwan
PR2 9PP
Man Rev 1.0
CLEANING & MAINTENANCE
• Clean the outside casing with a soft cloth lightly moistened with a mild detergent.
• Never use any abrasive or solvents.
SPECIFICATIONS
Main connector box dimensions (L x W x D)
IR receiver
95mm x 48mm x 24mm
17mm x 10mm x 6.5mm
Weight 65g (connector box)
14g (IR receiver)
Receiver frequency range 20-60kHz
Transmitter frequency 20kHz to 60kHz
IR Range 10 meters
Power 12VDC 0.5A