Proaction 908/8573 Assembly Instructions

– A3 Laminator
Installation & User Instructions – Please keep for future reference 908
/
8573
These instructions contain important information which will help you get the best from your
appliance and ensure safe and correct installation, use and maintenance.
If you need help orhave damaged or missing parts, call the Customer Helpline: 0345 640 0800
Important –Pleaseread these instructions fully before installing or using
Issue 1 – 27/04/12

Contents
Safety Information 2
Parts 3
Installation 4-5
Location 4
Electrical Connection 5
User Instructions 6
Before first use 6
Using your appliance 6
Care and Maintenance 7
General 7
Trouble Shooting 7
Technical Specifications 8
Disposal information 8
Guarantee 9
Product codes
OL386
1

Safet
y
Information
Im
p
ortant
–
Please read these instructions full
y
before installation
Before use Durin
g
use
Dispose of all packaging carefully and responsibly.
The appliance is designed for indooruse only.
Do not use outdoor..
The appliance MUST be positioned on a firm
level base.
Please use the laminator with a correct power
supply.
If the power supply cord is damaged it must be
replaced by a qualified electrician in order to
avoid a hazard.
Make sure the on /off switch is in the OFF
position before pluggingin the laminator.
Follow all warnings and instructions marked on
the product.
Do not use appliance for other than intended use.
Keep the power cord away from hot surface.
Do not immerse the machine in water or any
other liquid to protect against electric shock.
Keep children away from the machine. This
machine should be operated by adults only.
Please don't spay any flammable gas or oil on
this shredder, it may cause a fire.
Do not allow this appliance to be exposed to rain
or moisture.
Unplug the laminator when not in use or before
moving or cleaning.
Only clean the Laminator by wiping with a dry
cloth.
Never remove the cover or dismantle the
machine, no serviceable parts inside.
WARNING! Do not place fingers, hair, loose
clothing and jewellery near the pouch entry hole
as serious injury may occur.
Always operate on a flat horizontal surface.
Please note cardboard carrier pouches must not
be used with this laminator as it may cause
jamming or damage to the laminator
The objects to be laminated cannot be metal or
plastic objects (iron copper aluminum etc).
Please do not insert anything into the machine
other than laminating films and suggested items.
The machine is only to be used for laminating.
Do not block the pouch exit hole or the pouch will
jam inside the machine tocause hazard.
The top of the laminator will become hot during
use, please do not touch.
This appliance is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction concerning
use of the appliance by a person responsible for
their safety. Children should be supervised to
ensure that they do not play with the appliance.
This appliance is not intended for use by young
children or infirm persons unless they have been
adequately supervised by a responsible person to
ensure that they can use the appliance safely.
Young children should be supervised to ensure
that they do not play with the appliance.
Do not operate the appliance with a damaged
cord or plug or after the appliance malfunctions,
or has been damaged in any manner.
Do not attempt to repair the appliance yourself.
Contact the Customer Helpline: 0345 640 0800.
2

Part
Please familiarize yourself with the parts and accessories listed below
1. Power indicator 4. Cold/off/hot switch
2. Ready indicator 5. Jam release switch
3. Pouch entry hole 6. Pouch exit hole
Instructions x 1
Accessories included
3
1
2

Installation
Location
Caution: Always operate this product on
a flat horizontal surface.
yCarefully remove all packaging materials and
dispose of correctly.
yEnsure the supply cable is not caught under
the appliance.
yDo not operate under or near curtains or other
combustible materials
yDo not place the appliance near a heat source
or in direct sunlight.
4

Installation
Electrical connection
Any electrical work that is required to
install this appliance MUST be carried out by
aqualified electrician.
Before making any electrical connections,
ensure that:
Do not bend, stretch or pull the supply cable to
avoid electric shock.
Ensure the power socket is suitable for the
maximum power of the machine.
The supply voltage should be the same as that
indicated in the technical specifications and
the appliance rating plate.
If the socket outlets in your home are not
suitable for the plug supplied with this unit
check with aqualified electrician for
replacement.
The use of adapters, multiple connectors or
extension cables are not recommended.
The appliance must be connected to a 220-
240 volt 50Hz AC supply by means of a three
pin socket, suitably earthed and protected by a
3 amp fuse.
Should the fuse need to be replaced, a 3 amp
fuse approved toBS1362 must be used.
The plug contains aremovable fuse cover that
must be refitted when the fuse is replaced. If
the fuse cover is lost or damaged, the plug
must not be used until a replacement cover
has been fitted or the plug is replaced.
A damaged plug should be cut off as close to
the plug body as possible, the fuse should be
removed and the plug disposed of safely.
Plug replacement (UK & Ireland only)
Should you need to replace the plug; the wires in
the power cable are coloured in the following
way:
Blue – Neutral ‘N’
Brown – Live ‘L’
As the colours of the wires in the power cable
may not correspond with the coloured markings
identifying the terminals in your plug, and
proceed as follows:
The blue wire must be connected to the terminal
that is marked with the letter N.
The brown wire must be connected tothe
terminal that is marked with the letter L.
If power supply cord is damaged, it must
replaced by the manufacturer or its service
agent or a similar qualified person in order to
avoid a hazard.
5

Before first use
User Instructions
Setting up the shredder
1. Remove the Laminator from the packaging
and unwind the cord to its full length.
2. Plug the machine into a suitable power
supply outlet.
3. Make sure the function switch is at “OFF”
position.
4. Connect the plug to the 220-240V AC mains.
Using your appliance
1. Plug the machine into a suitable power supply
outlet.
2. For cold lamination, Switch to Cold
(︳)position to connect the power and start
with cold lamination, the LED will light up Blue,
the power is on and ready for cold lamination;
For hot lamination ,switch to Hot (∥) position,
the LED will light up Blue, the machine will
start to heat up. After 3-5 minutes, the Orange
READY LED will illuminate when the machine
has reached the correct operating temperature.
The machine is ready to laminate.
3. Prepare the laminating pouch for inserting into
the machine. Load the paper centrally into the
pouch alongside the pre-sealed edge. Do not
use pouches thicker than 250micron
(2x125micro per side).
4. When the machine has reached operating
temperature, the pouch can be inserted into
the machine until it engages with the rollers.
Always insert the pouch with the close edge
into the machine. This will have a better finish.
Do not insert the pouch with open edge into
the machine. This may cause jam issue in the
machine.
5. The pouch will move through the machine and
exit at another side.
6. Turn the laminator OFF (O) after use.
7. Remove the plug from the power supply.
6

Care and Maintenance
General
Important: Always unplug the appliance from the power socket during cleaning and
maintenance.
Never use any sharp instruments or abrasive substances, soap, household cleaner, detergent or wax
polish for cleaning.
Use luke warm water to clean the cabinet of the appliance and wipe it dry.
Never clean the appliance with flammable fluids. It could cause a damage and fire hazard.
Ensure the unit is dry before connect tothe mains.
Trouble Shooting
In the unlikely event of difficulties with your appliance please follow the trouble shooting guide below. If
the problem persists,contact the retailer if the machine is still under guarantee on 0345 640 0800.
Problem Possible cause Solution
Appliance does not
start
The mains plug is not plugged in.
The switch is off
Fuses of theelectrical system at
home open.
Jammed with paper inside
the motor has overheated and the
thermal cutout device has tripped
Insert the mains plug.
Let switch on
Check the protection devices and
fuses.
Clean the jammed paper
Allow the Laminator to cool down for
40 minutes,then it should
automatically start working again.
Paper cannot exit at
another side
It jammed, can’t reverse automatically unplug the Laminator and press” jam
release switch” gently to pull the
paper out.
7

Technical Specifications
Disposal information
Model OL386
Voltage 220-240 V 50Hz
Current 1.15 A
Power Max. 265W
Film Thickness Can Be Used 160(2 x 60)-250(125 x2) microns
Max Document Size up to A3 size 303 x 426 mm
Warm up Time approx. 3 – 5 mins
Laminating speed approx. 30 cm/min
Max Document Thickness 0.6 mm
Net weight 1.48kg
Dimension 440 x 150 x 65 mm
We apologise for any inconvenience caused by any minor inconsistencies in these instructions, which may
occur as a result of product improvements and development.
This appliance complies with the following EEC directives:
2006/95/EEC Low voltage directive
2004/108/EEC EMC directive
The symbol on the product or its packaging indicates that this product may not be treated as
household waste. Instead it should be handed over to the applicable collection point for the
recycling of electrical and electronic equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate waste handling of this
product. For more detailed information about recycling this product, please contact your local
council office, your household waste disposal service or the shop where the product was
purchased.
8

Guarantee
PRODUCT GUARANTEE
This product is guaranteed against manufacturing defects for a period of
Year
This product is guaranteed for twelve months from the date of original purchase.
Any defect that arises due to faulty materials or workmanship will either be replaced,
refunded or repaired free of charge where possible during this period by the dealer from
whom you purchased the unit.
The guarantee is subject to the following provisions:
yThe guarantee does not cover accidental damage, misuse, cabinet parts, knobs or
consumable items.
yThe product must be correctly installed and operated in accordance with the instructions
contained in this manual.
yIt must be used solely for domestic purpose.
yThe guarantee will be rendered invalided if the product is re-sold or has been damaged by
inexpert repair.
ySpecifications are subject to change without notice.
yThe manufacturer disclaims any liability for the incidental or consequential damages.
yThe guarantee is in addition to, and does not diminish your statutory or legal rights.
Guarantor:Argos Ltd
489 - 499 Avebury Boulevard
Central Milton Keynes
MK9 2NW