PROAIM CINEMA CT-SDCF-CV4 User manual

1
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Soundchief Channel Cart (CT-SDCF-CV4)
Assembly Manua l
1 x Cup Holder
2 x Safety Hook
1 x Boom Pole Holder Kit
2 x 16'' Wheels
2 x Antenna holder
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable copyright
statutes or in wring by the Publisher.
Proaim Soundchief CV4 Cart with
1 x Height Adjustable Shelf and
1 x Headphone Holder
1 x Sliding Shelf Boom self
Wrench (10-11) & Allen key
(4mm, 5mm, 5/16”)
Tablet
Holder
1 x 4u 19'' Rack Adapter Kit

2
• Loosen the bolts of the Sound chief channel
cart with an Allen key 5/16" Allen key.
• Match the center hole of the wheels and cart,
and insert the bolt into the wheel.
• Aach the wheel to the cart by removing the
bolt.
Soundchief Channel Cart Setup
• Properly ght the bolt with a 5/16" Allen key
and follow the same process for the other
side of the wheel.
• Both the wheels are properly aached to the
Sound Chief Channel Cart, as shown in the
image
• Remove the knob of the boom shelf.
Boom Plate

3
• Remove the bolts on both sides of the boom
plate with the help of a 5mm Allen key.
• Then properly ght bolt with 5mm Allen key.
• Aach the boom plate to the boom of the
cart, and insert the side bolt matching the
hole of the cart panel and the plate.
• To aach the boom plate to the cart, secure
it properly with the help of a knob.
• For side security, rstly remove the buon
head with a 5mm Allen key and slide the
Boom Channel Support Plate to align it.
• Then insert the buon head by ghtening it
properly with a 5mm Allen key.

4
• To aach the boom plate to the cart, secure
it properly with the help of a knob from the
other side as well.
• The boom plate is properly aached to
Proaim Soundchief Channel Cart
• Properly remove both the side knobs on the
cart.
• Aach Sliding Shelf to Channel Cart.
• Then insert the knob on the plate of the
sliding shelf.
• Tighten both the knobs of the sliding shelf
properly from both sides.
Sliding Shelf

5
• Open the adjustable shelf and ghten it
properly with the help of knobs on both sides.
• Loosen the knobs on both sides of the height
adjustable shelf.
• Remove the buon head of the rack adapter
kit with the help of a 5mm Allen key, and set
the posion of the adapter kit according to
your requirement.
• The height-adjustable shelf is properly
aached to Proaim Soundchief Channel Cart.
• Match the thread of the cart and rack adapter
kit and insert the buon head and ghten
with the help of a 5mm Allen key from both
sides.
• The sliding shelf is properly aached to
Proaim Soundchief Channel Cart.
Height Adjustable Shelf
4u 19" Rack Adapter Kit

6
• Insert the boom cup into the boom cup
mount.
NOTE: The boom part of the boom pole rests
in the boom cup.
• Aach the Boom Pole Holder Kit to the cart
and ghten it properly with a 5mm Allen Key.
NOTE: The boom pole holder kit consists of 3
parts: boom clamp, boom cup, and boom cup
mount. All three parts are used to mount a
boom pole to the cart.
• Aach the boom cup mount to the cart, and
secure it properly to the cart with a 5/16"
Allen Key.
• Aach the Antenna Holder to the cart losing
its knob and ghten it with the help of a 5mm
Allen key; Follow the same process for
aaching another holder.
• Both the holders are properly aached to
Proaim Soundchief Channel Cart, as shown in
the image.
Boom cup
Mount
• Align the tablet holder to the cart, and secure
it properly with the help of a 5mm Allen key

7
• Aach the cup holder and secure it with a
5/16" Allen key, as shown in the image.
• Aach the Safety Hook to the boom shelf as
shown in the image.
NOTE: With the help of safety hooks, the gears/
equipment do not fall and remain stable even
while moving the cart.
NOTE: The whole cart is designed in the channel
version so that you can x the shelves wherever
you want. The provided Rack Mount oers you
the ease of accessorizing it.
• Repeat the same process for aaching a hook
to the sliding shelf.

8
YOUR PROAIM SOUNDCHIEF CHANNEL CART
ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
Warranty: We oer one year warranty for our products from date of purchase. Within this period of me,
we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor does it
cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspecon
and evaluaon by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in
transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our utmost
support and care unl you use our product.