Procolored DTF-A3-PRO XP600 User manual

-1-
DTF-A3-PRO XP600*2 Printer
manual

-2-
Table of Contents
Safety Instructions .......................................................................................................... - 3 -
Machine Views ................................................................................................................ - 4 -
1. Product Specification ................................................................................................. - 5 -
2.Install the ink bottle holder and roll film.....................................................................- 6 -
3.Install printing software ............................................................................................... - 7 -
4.Install the ink ................................................................................................................ - 8 -
5.Install RintRIP .............................................................................................................. - 9 -
6.Printing process ......................................................................................................... - 10 -
7.Daily maintenance ..................................................................................................... - 11 -

-3-
Safety Instructions
1. Read all instructions.
2. Use the DTF A3 PRO Printer only for its intended use.
3. To reduce the risk of electric shock, do not immerse the DTF printer in water or
other liquids.
4. Do not disassemble or attempt to repair the DTF printer. Take it to a qualified
service person for examination and repair.
5. This equipment is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of this equipment by a person responsible for their safety.
6. Close supervision is necessary for any DTF printer being used by or near
children. Do not leave equipment unattended while connected.
7. The DTF A3 PRO Printer needs routine maintenance, please refer to the
included manual.

-4-
Machine Views
Waste ink
collector
Film feed position
Temperature and
humidity display Nozzle
position
Ink position
film exit
position
printer panel
buttons

-5-
1. Product Specification
Model DTF PRO Print Head XP600*2
Print Size A3（300*420mm) Platform Size A3（350*200mm)
Print Speed 8PASS; 2 m2/H Print width 300mm
Ink Supply Mode Continuous Ink Supply Software RIPrint
Ink Consumption 1m2/20ml System Window XP、7、10
Voltage / Plug AC100~230V/ Optional
according to the country
Color
Configuration CMYKW+WWWWWW
Connection
Method Cable Heating Function Support
Nozzle Protection White ink circulation Package Size L1080*W610*H590mm
Adsorption
function Support Net Weight / Gross Weight 50KG/80KG
Machine Size L1000*W550*H480mm Outer Package Export wooden case + Foam

-6-
2.Install the ink bottle holder and roll film
Instructional video link：https://youtu.be/nm68F8RyBpY
1. Take out the 2 screws that fix the ink tray 2. Align the screw holes of the fixing ink bracket with
the screw holes of the machine, and fix them with 2
screws
3. Assemble the reel stand 4. Make sure the PET film is installed correctly
5. Pass the film paper through the printer 6. Pull the membrane paper to the correct position

-7-
3.Install printing software
Instructional video link：https://youtu.be/69aG5BN1zys
1. Insert the white dongle 2. Create a folder
3 .Add the software installation folder to the firewall
trust list
4. Copy the data to the folder you just created
5.Create a desktop shortcut 6. Set the printer IP address
7.Set the X axis print position to 50 8.Print the test

-8-
4.Install the ink
Instructional video link：https://youtu.be/2C2JF0GlrLU
1.Remove the cable ties from the waste ink tube 2.Add ink in the order indicated by the color
3.Draw 5ml of ink from each ink sac 4.Pump ink with software
5.Ink for 15 seconds 6.Print a test strip and check that the test strip is
complete

-9-
5.Install RintRIP
Instructional video link：https://www.youtube.com/watch?v=0RjMzWTTHME
1.Find the RintRIP software and double-click to install 2.Installation curve
3.Set Spot Colors 4.Set Spot Colors in Photoshop
5.Import pictures with RintRIP 6.Convert image format with RintRIP

- 10 -
6.Printing process
(powder shaker is purchase separately)
Instructional video link：https://youtu.be/MpAovwtM7R8
1. Take out all the accessories from the oven 2. Install the receiving module
3. Fix the PET film to the receiving module 4. Use RIPRint to print pictures
5.Make sure the PET film is flat during the printing
process
6.After printing, the print head returns to the right

- 11 -
7.Daily maintenance
Instructional video link：https://youtu.be/61IvAcTH9o4
1.Cleaning the print head 2.Print the printhead status diagram
3.Clean the grating strips 4.Clean the ink station
5.Clean the rails and lubricate them 6.Open the side panel and clean the bottom of the
printhead
7. print head and ink pad must be in contact during standby 8.Clean the print platform