Progetto CIRQUE Series User manual
Cirque Functional Mirrors
Instruction Manual
INSTALLATION INSTRUCTIONS
CIRQUE FUNCTIONAL MIRRORS
CI45M/CI75M/CI90M/CI120M/CI150M
www.plumbline.co.nz
Distributed by:
Tools Needed:
Important
PRODUCT FEATURES
Matt Solid surface products require minimal maintenance. For every day cleaning, after use, simply wipe with a soft wet cloth to remove any
surface dirt. For tougher marks we recommend using widely available cleaning products such as liquid jiff. Occasionally you may require a
mildy abrasive product to erase scratches. The included pad must be used if this is required.
Never use petroleum-based products when cleaning, i.e. acetone paint thinners or other solvents, as they may damage the solid surface.
Personal hygiene products and cosmetics wil NOT damage the surface.
Mark the corresponding assembly position onto the wall
(Electricity Need to located in the middle)
Warning! Make sure the cables are belong to
an Independent fused Socket.
Please check the level
Place the Metal bracket on the mark and fasten with screws
Three screws should be fixed for each metal bracket
!
!
After installation, please check the level again with spirit level
Make sure the bubble between
the two lines of the spirit level
Mild
Soap
Ditiseenniet gebonden tekst
zonderzinnigeinhoud.
Dezedientom zeer kleine
etikettentevoorzienvan letters
entekens
CLEAN
Ditiseennietgebonden tekst
zonderzinnigeinhoud.
Dezedientomzeer kleine
etikettentevoorzienvanletters
entekens,debestedefenitie is
inditgevalklinkklareonzin in de
meestbasicvorm.Ditiseen niet
gebondentekst
zonderzinnigeinhoud.
Connect the electric cables of the mirrors to the main power.
7
Hang up the mirror on to the bracket Use silicone to seal around the frame and
wait for 24 hours to dry
!
This manual suits for next models
5
Table of contents
Languages:
