Project Source LS200409 User manual

ITEM # 4347310 / 4347311 / 4347312
70235098 / 70235099 / 70235100
MODEL # LS200409 / LS200411 / LS200413
Français p. XX
1
Français p. 7
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-866-389-8827, 8 a.m. - 8 p.m., EST, Monday - Sunday.
Serial Number Purchase Date
AS21349
You could also contact us at [email protected] or visit www.lowespartsplus.com.
ATTACH YOUR RECEIPT HERE
VANITY WITH TOP
PROJECT SOURCE and logo design are trademarks or
registered trademarks of LF, LLC. All rights reserved.

2
TABLE OF CONTENTS
PACKAGE CONTENTS
YTITNAUQNOITPIRCSEDTRAP
ACultured marble top 1
BVanity body 1
CVanity base 1
A
C
B
Package Contents...........................................................................................................................2
Hardware Contents..........................................................................................................................3
Safety Information............................................................................................................................3
Preparation ......................................................................................................................................3
Assembly or Installation Instructions
............................................................................................4-5
Care and Maintenance....................................................................................................................6
Warranty...........................................................................................................................................6
Troubleshooting...............................................................................................................................6
Replacement Parts List....................................................................................................................6

3
HARDWARE CONTENTS
Handle
Qty. 2
Handle screw
Qty. 2
Screw
Qty. 2
AA BB CC
Anchor bolt
Qty. 2
Adjusting screw
Qty. 4
Screw
Qty. 2
DD EE FF
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
Handle with care. Do not drop or handle roughly as this will damage the vanity.
CAUTION
It's fragile, handle with care.
WARNING
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 30 minutes
Tools Required for Assembly (not included): Phillips screwdriver, Hammer, Tape measure,
Helpful Tools (not included): Level.
PREPARATION
Drill, Glue gun.

ASSEMBLY INSTRUCTIONS
4
1. Take the vanity body out of the box.
Carefully lay the vanity body down on a soft
surface to avoid scratching the surface.
Attach the handle to the door with screw.
2. Place the vanity body upside down on a
non-abrasive surface. Attach the base to the
bottom of the vanity with the screws provided.
Install adjusting screws on the bottom of the
base.
1
2
Hardware Used
Handle
Handle screw
x 2
x 2
AA
BB
AA
EE
FF
C
B
BB
B
Hardware Used
Adjusting screw
Screw
x 4
x 2
EE
FF

ASSEMBLY INSTRUCTIONS
5
3. Attach the rear panel to the wall with anchor
bolts and screws.
4. Apply latex sealant along the top beam of
the cabinet. Carefully place and adjust the
washbasin onto the vanity. Make sure it
touches the latex sealant along the entire
length.
3
4
Hardware Used
Anchor bolt
Screw
x 2
x 2
DD
CC
B
C
CC
B
C
DD
A

6
Printed in China
CARE AND MAINTENANCE
Clean with a soft cloth using non-abrasive cleaners.
TROUBLESHOOTING
Problem: Vanity top wobbles when placed on the vanity base.
Possible Cause: The vanity base is not installed level and plumb.
Corrective Action: Ensure the vanity base is level and plumb.
WARRANTY
REPLACEMENT PARTS LIST
12 MONTH LIMITED WARRANTY
These products have been made to quality standards and are guaranteed for domestic use
against manufacturing faults for a period of 12 months from the date of purchase.
Damage to product that has been caused by accident, misuse or abuse is not covered by this
warranty. The product is guaranteed for 12 months if used for normal trade purposes. Any warranty is
invalid if the product has been overloaded or subject to neglect, improper use or an attempted repair
other than by an authorized agent. Heavy-duty or daily professional/commercial usages are not
guaranteed. Due to continuous product improvement, we reserve the right to change the product
specifications without prior notice.
YTITNAUQNOITPIRCSEDTRAP
AA Handle 2
BB
Handle screw
2
Handle
Qty. 2
Handle screw
Qty. 2
AA BB
For replacement parts, call our customer service department at 1-866-389-8827, 8 a.m. - 8 p.m., EST,
Monday - Sunday. You could also contact us at [email protected] or visit www.lowespartsplus.com.

ARTICLE # 4347310 / 4347311 / 4347312
70235098 / 70235099 / 70235100
LS200409 / LS200411 / LS200413
7
AS21349
MODÈLE #
Français p. XX
Français p. 7
Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au
détaillant, appelez notre service à la clientèle au 1 866 389-8827, entre 8 h et 20 h (HNE),
du lundi au dimanche.
Vous pouvez également communiquer avec nous à l’adresse [email protected] ou
visiter le site www.lowespartsplus.com.
Numéro de série Date d’achat
JOIGNEZ VOTRE REÇU ICI
MEUBLE-LAVABO
AVEC COMPTOIR
PROJECT SOURCE et le logo sont des marques de
commerce ou des marques de commerce déposées
de LF, LLC. Tous droits réservés.

8
A
C
B
TABLE DES MATIÈRES
Contenu de l’emballage.....................................................................................................................8
Quincaillerie incluse .........................................................................................................................9
Consignes de sécurité......................................................................................................................9
Préparation
.......................................................................................................................................9
Instructions pour l’assemblage ou l’installation .........................................................................10-11
Entretien .........................................................................................................................................12
Garantie..........................................................................................................................................12
Dépannage.....................................................................................................................................12
Liste des pièces de rechange.........................................................................................................12
CONTENU DE L’EMBALLAGE
QUANTITÉDESCRIPTIONPIÈCE
AComptoir en similimarbre 1
BCorps de meuble-lavabo 1
CBase de meuble-lavabo 1

9
QUINCAILLERIE INCLUSE
Poignée
Qté : 2
Vis de poignée
Qté : 2
Vis
Qté : 2
AA BB CC
Boulon d’ancrage
Qté : 2
Vis de réglage
Qté : 4
Vis
Qté : 2
DD EE FF
CONSIGNES DE SÉCURITÉ
Assurez-vous de lire et de comprendre l’intégralité du présent manuel avant de tenter d’assembler,
d’installer ou d’utiliser l’article.
Manipulez cet article avec soin. Évitez de laisser tomber et de manipuler brusquement le
meuble-lavabo afin de ne pas l’endommager.
ATTENTION
Cet article est fragile, manipulez-le avec soin.
AVERTISSEMENT
Avant de commencer l’assemblage de l’article, assurez-vous d’avoir toutes les pièces. Comparez le
contenu de l’emballage avec la liste de la quincaillerie incluse. S’il y a des pièces manquantes ou
endommagées, ne tentez pas d’assembler l’article.
Temps d’assemblage approximatif : 30 minutes.
Outils nécessaires pour l’assemblage (non inclus) : tournevis cruciforme, marteau, ruban à mesurer,
perceuse, pistolet à colle.
Outils utiles (non inclus) : niveau.
PRÉPARATION

INSTRUCTIONS POUR L’ASSEMBLAGE
10
1
2
AA
EE
FF
C
B
BB
B
1. Sortez le corps de meuble-lavabo de la boîte.
Posez soigneusement le corps de meuble-lavabo
sur une surface douce pour éviter de l’égratigner.
Fixez la poignée à la porte à l’aide d’une vis.
Quincaillerie utilisée
Poignée
Vis de poignée
x 2
x 2
AA
BB
2. Placez le corps de meuble-lavabo à l’envers sur
une surface plane et non abrasive. Fixez la base
au bas du meuble-lavabo à l’aide des vis fournies.
Insérez les vis de réglage dans le bas de la base.
Quincaillerie utilisée
Vis de réglage
Vis
x 4
x 2
EE
FF