There are 4 speeds. It is suggested to start blending on speed 1
and then increase to speed 2 or higher setting if necessary to
blend until desired consistency is reached.
The speed can be changed at any time during the blending
process.
During blending
You can feed in small amounts of food or liquid through the jug
lid. To do this, lift out the lid cap and then gradually feed pieces
of food or liquids into the jug through the lid opening. Replace
the lid cap when you have finished.
Use the stirrer to distribute the contents of the jug. There is a slot
in the lid cap to allow you to insert and remove the stirrer.
The stirrer may be safely left in the jug during blending.
Pulse function
You can use this function when ingredients need to be blended in small repeated bursts.
First turn the control knob back to “0” and then press the pulse button P and hold it for a short period.
To stop the operation, release the button.
After you have finished blending
1. Turn the control knob to “0” and unplug the appliance from the mains socket.
2. Remove the stirrer if you are using it.
3. Remove the lid by turning it clockwise.
4. Hold the jug carefully and turn it clockwise to release the jug from the motor base.
5. Remove the jug and pour or spoon the contents out carefully.
CLEANING AND MAINTENANCE
Warning: Always turn off and unplug the appliance before cleaning.
Remove the lid cap and stirrer from the jug. Remove the jug from the motor base. Wash them in warm
soapy water. Rinse them thoroughly.
Clean the motor base with a damp cloth. DO NOT immerse it in water.
Dry the entire appliance with a dry cloth before replacing.
Do not use chemical cleaners or abrasives product for cleaning.
SPECIFICATIONS
Ratings: 220V-240V~, 50/60Hz
350-400W
Downloaded from www.vandenborre.be
