PROLiNK PEN1201 User manual

Version 2.00
(English | Indonesian)
Wi-Fi extender
Quick Installation
Guide
Model No:
PEN1201

Physical Interface
Dimension: 99*60*70mm
Weight: 88g
1
x 1 x 1 x 1
Package Contents
1
Overview
2
WPS Button
• To connect with Wi-Fi Client: Press and release
• To connect with an existing Router’s Wi-Fi: Press and
hold for 6 seconds
1.
1
2
3
4
567
89

2
LED Indicators
Working StatusStatus
Status
Wi-Fi
Signal
Strength
Indicator
Extender is turned O / No PowerOFF
Extender is turned OnON
Extender is having data transmissionFast blinking
Triggering WPSSlow blinking
Low Wi-Fi signal strengthOne LED Bar
Good Wi-Fi signal strengthTwo LED Bar
Excellent Wi-Fi signal strengthThree LED Bar
Wi-Fi Signal Strength Indicator2.
Status Indicator3.
Operation Mode switch (Repeater, Access Point and Router)4.
WAN/LAN Port5.
LAN Port6.
AC Power Input9.
Power Switch7.
8. RESET Button
AP
Repeater
Router
• Top position: Access Point (AP) Mode
• Middle position: Repeater Mode
• Bottom position: Router Mode
OFF
ON
•Top position: Turn OFF Extender
•Bottom position: Turn ON Extender
RESET • To reboot: Press and release
• To do Factory Reset to Default:
Press and hold for 12 seconds

3
Installation
3
How to set PEN1201 as Repeater/Extender:
Step 1: Set to Repeater Mode
AP
Repeater
Router
Step 2: Place the PEN1201 near your main Router for first
time setup and turn it On
Step 3: Connect your Wi-Fi Client (e.g. mobile phone) to the
PEN1201 Wi-Fi SSID (Wi-Fi SSID and password can be
found on the product label). Tap Connect if prompted
the connected SSID doesn’t have Internet access

4
Step 4: Launch Internet Browser and type
http://pen1201.setup (please do type out http://)
Step 5: Login to the Web GUI default username/password
(default username: admin; default password: password)
Step 6: Click Repeater Wizard

5
Step 7: Select your existing home Wi-Fi SSID and enter the
Wi-Fi password
Note: The PEN1201 SSID will now change to follow your home
router SSID with sux “-ext”. The Wi-Fi Password for
PEN1201 will also follow your home router Wi-Fi password.
Following Step 7 example, the PEN1201 SSID will be changed
to Prolink_Wi-Fi-ext
Step 8: Click Save to proceed
Step 9: Wait for about 60 seconds for both Status and Wi-Fi
Signal Strength indicators lit up, after which you may
connect to the new PEN1201 SSID with the same home
router Wi-Fi password

6
You may move the PEN1201 to be in between your home
router and Wi-Fi area which you intend to cover
Best
Good 2 LED bars light up
≥
Status Indicator (Power)
In between dead
zone and router
PEN1201
Router Devices
How to change Wi-Fi SSID/Password:
Step 1: Connect your device to the PEN1201 LAN port or
PEN1201 SSID (default is Prolink_XXXXX or Your
RouterSSID-ext)
Step 2: Launch a Web browser and type http://pen1201.setup
(please do type out http://)
Step 3: Locate, Click Wi-Fi Settings, and proceed to change
the SSID and/or Password
Step 4: Click Save to proceed

7
How to change Web Login Password:
Step 1: Connect your device to the PEN1201 LAN port or
PEN1201 SSID (default is Prolink_XXXXX or Your
RouterSSID-ext)
Step 2: Launch a Web browser and type http://pen1201.setup
(please do type out http://)
Step 3: Locate, Click Password Settings, and proceed to set
your new password accordingly
Step 4: Click Save to proceed
Note: This password is referring to the Web Interface Login
password, not the Wi-Fi password
How to set PEN1201 as Router/AP (Access Point):
Please download and follow the respective Setup
Guide from the below link:
https://prolink2u.com/networking/wifi-extender/
pen1201/download/

1
Antara Muka Fizikal
Isi Kemasan
1
Penjelasan
2
x 1 x 1 x 1
Tombol WPS
• Untuk terhubung dengan Wi-Fi Client: Tekan dan
lepaskan
• Untuk terhubung dengan Wi-Fi Router yang ada:
Tekan dan tahan selama 6 detik
1.
Dimensi: 99*60*70mm
Berat: 88g
1
2
3
4
567
8 9

2
Port WAN/LAN5.
Port LAN6.
Indikator signal Wi-Fi2.
Indikator Status3.
Saklar mode Operasi (Repeater, Access Point and Router)4.
AP
Repeater
Router
• Posisi Atas: Mode Access Point (AP)
• Posisi Tengah: Mode Repeater
• Posisi Bawah: Mode Router
Indikator LED
Status Saat BerjalanStatus
Status
Kekuatan
Signal
Wi-Fi
Indikator
Extender tidak aktif/tidak ada dayaOFF
Extender aktifON
Transmisi dataBerkedip cepat
Memicu WPSBerkedip lambat
Kekuatan signal Wi-Fi rendahSatu bar LED
Kekuatan signal Wi-Fi baikDua bar LED
Kekuatan signal Wi-Fi sangat bagusTiga bar LED
RESET • To reboot: Press and release
• To do Factory Reset to Default:
Press and hold for 12 seconds
Tombol Reset8.
Input Power AC9.
OFF
ON
• Top position: Turn OFF Extender
• Bottom position: Turn ON Extender
Switch Power7.

3
Instalasi
3
Cara mengatur PEN1201 sebagai Repeater/Extender:
Langkah 1: Set ke Mode Repeater
AP
Repeater
Router
Langkah 2: Tempatkan PEN1201 di dekat Router Anda terlebih
dahulu dan nyalakan
Langkah 3: Hubungkan Wi-Fi Client Anda (mis. Ponsel) ke PEN1201
Wi-Fi SSID (Wi-Fi SSID dan password dapat ditemukan
pada label produk). Tekan Connect jika diberitahu bahwa
SSID yang terhubung tidak memiliki akses Internet.

Langkah 4: Luncurkan web browser dan masukkan
http://pen1201.setup (harap ketikkan http://)
Langkah 5: Login ke Web GUI dengan default username/password
(username: admin/password: password)
Langkah 6: Klik Repeater Wizard
4

5
Langkah 7: Pilih SSID Wi-Fi rumah Anda dan masukkan
Wi-Fi password
Catatan: SSID PEN1201 akan berubah mengikuti SSID Wi-Fi rumah
dengan sux “-ext”. Wi-Fi Password PEN1201 juga akan
mengikuti Wi-Fi Password router rumah Anda.
Mengikuti contoh di langkah 7, SSID baru PEN1201 akan
berubah jadi Prolink_Wi-Fi-ext
Langkah 8: Klik Save
Langkah 9: Tunggu sekitar 60 detik untuk indikator Status dan
Wi-Fi Signal Strength menyala, setelah itu Anda
boleh menghubungkan Wi-Fi klien ke SSID baru
PEN1201 dengan Wi-Fi Password router rumah Anda

6
Sekarang Anda boleh menempatkan PEN1201 diantara router
dan Wi-Fi area yang mau di-cover.
Best
Good 2 LED bars light up
≥
Status Indicator (Power)
In between dead
zone and router
PEN1201
Router Devices
Cara mengubah Wi-Fi SSID/Password:
Langkah 1: Hubungkan perangkat Anda ke LAN port PEN1201 atau
SSID PEN1201 (Prolink_XXXXX atau RouterSSID-ext)
Langkah 2: Buka Web browser dan masukkan
http://pen1201.setup (harap ketikkan http://)
Langkah 3: Cari, Klik Wi-Fi Settings, dan lanjutkan untuk
mengubah SSID dan/atau Password
Langkah 4: Klik Save

7
Cara mengubah Web Login Password:
Langkah 1: Hubungkan perangkat Anda ke LAN port PEN1201 atau
SSID PEN1201 (Prolink_XXXXX atau RouterSSID-ext)
Langkah 2: Buka Web browser dan masukkan
http://pen1201.setup (harap ketikkan http://)
Langkah 3: Cari, Klik Password Settings, dan lanjutkan untuk
mengubah password Web GUI
Langkah 4: Klik Save
Catatan: Password yang disebutkan diatas mengacu pada
Web GUI Password, bukan Wi-Fi Password
How to set PEN1201 as Router/AP (Access Point):
Silakan unduh dan ikuti Pengaturan masing-masing
dari:
https://prolink2u.com/networking/wifi-extender/
pen1201/download/

INDONESIA Office
PT PROLINK INTIDATA NUSANTARA
Walk-In : Jl. Cideng Barat No. 79, Jakarta Pusat 10150, Indonesia.
Telephone : [phone]
Email Support : [email protected]
MALAYSIA Office
FIDA SYSTEMS (M) SDN BHD
Walk-In : 29 Jalan USJ 1/31, 47600 Subang Jaya,
Selangor Darul Ehsan, Malaysia.
Telephone : [phone]
Email Support : [email protected]om
SINGAPORE Office
FIDA INTERNATIONAL (S) PTE LTD
Walk-In : Block 16 Kallang Place #06-02,
Kallang Basin Industrial Estate, Singapore 339156.
Telephone : [phone]
Email Support : [email protected]
Technical Support Hotline
INDONESIA : [phone]
MALAYSIA : [phone]
SINGAPORE : [phone]
Note: Closed on Saturdays, Sundays and local/regional Public Holidays.
Worldwide Customer Care Centers
Register online for your Product Warranty at www.prolink2u.com
Prolink is a registered trademark of Fida International (S) Pte Ltd. Other brands and product names are
trademarks or registered trademarks of their respective holders. Product images are purely for illustrative
purposes and may defer from the actual product. Specifications are subjected to changes without prior
notice. Copyright © 2021 Fida International (S) Pte Ltd.