Driver Size: 40mm
Audio:
• Output Channel: Stereo
• Output Power: 30mW (max.)
• Frequency Response: 20Hz ~ 20KHz
• Microphone: Support
• Microphone Sensitivity: -42db ± 3dB
Bluetooth:
• Bluetooth Version: 5.0 (backwards compatible)
• Support Profile: a2dp/avctp/avdtp/avrcp/hfp/spp/smp/att/gap/gatt/rfcom
m/sdp/L2cap profile
• Frequency: 2.402GHz - 2.480GHz
Modes:
• TF Slot: Up to 32GB
• Aux-In: Connect through the 3.5mm Audio Cable
Power:
• Battery Type: Built-in Li-Polymer Battery 300mAh
• Operating Time: Up to 8 hours; Standby Time: up to 170 hours
• Charging Time: Approx. 2 hours
Transmission Distance: Up to 10 meters (line of sight)
Dimension (WxHxD): 17mm x 8mm x 15.2mm
Weight: 158g
** Operating time varies depending on volume level
EN 3
4. Specications 5. Using the Device
5.1 Use and Handling
• Do not expose the headset to dust, moisture, liquid, high temperatures or
direct sunlight.
• Do not throw, drop, and knock on the headset with strong physical shock.
•
Use a soft and dry cloth to clean the headset. Do not wipe with a chemically
treated cleaning cloth.
• Do not disassemble the headset as this may cause damage to the internal
components.
• Permanent hearing loss may occur if the headset is used at high volume.
Set the volume to a safe level. Over time, increasingly loud audio may
start to sound normal but can actually be damaging to your hearing.
• To protect your hearing:
- Limit the amount of time you use the headset at high volume.
- Avoid raising the volume to block out noisy surroundings.
- Lower the volume if you unable to hear people speaking near you.
• If you feel the headset is irritating your skin, stop using it immediately.
5.2 Charging the Headset
1. Please charge the battery fully before first use.
2. Insert USB charging cable into USB port which supports 5V/1A
(e.g. USB Charger, Power Bank or PC/Laptop USB port).
3. Connect charging cable to the Micro USB port of headset.
4.
The headset LED lights in Red while charging and goes to Blue after
charging
is completed.
5. It takes about 2 hours time to charge the headset.
6.
Recharge the headset battery when you hear the voice prompt of
“Battery low”.
Notes:
• If charging starts while the headset is turned on, the headset will turn off automatically.
• The lifetime of the battery will be significantly reduced if your device is left uncharged for a long period. It is
recommended to recharge your headset at least once a month.
• The headset comes with Power Saving Mode - powers off automatically if no established connection within 5 minutes.
EN 4
5. Using the Device
EN 5
5.3 Bluetooth Mode
1. Powering On:
Press and hold “ ” for more than 3 seconds (voice prompt:
"Bluetooth Mode"), the headset enters into Bluetooth mode.
2. Pairing Operation:
a. Pairing for the first time:
• Power on the headset (voice prompt: "Bluetooth mode"),
LED indicator
flashes in Blue and Green after entering the Bluetooth mode.
• Enable the Bluetooth function of your device and select "PHB6003E".
Please enter "0000" if pin code is required.
•
Upon completion, LED indicator blinks in Blue (voice prompt: "Connected").
b. Re-pairing to other Bluetooth device:
• Turn off the Bluetooth function of connected device (voice prompt:
"Disconnected") and the LED indicator flashes in Blue and Green.
• Enable the Bluetooth function of the other device and select
"PHB6003E". Please enter "0000" if pin code is required.
• Upon completion, LED indicator blinks in Blue (voice prompt: "Connected").
c. Re-connecting:
• Search and pair to the last connected Bluetooth device within 3
seconds after powering on.
5.4 TF Mode (Memory Card)
1. Insert TF/MicroSD card into the card slot (voice prompt: "Music") to play
stored media automatically. When the headset is in Bluetooth, switch to
TF Mode by pressing the "M" button.
2. Audio File Formats: support MP3 and WAV
5.5 Aux-in Mode
Connect to external device using the provided 3.5mm audio cable, the
Bluetooth function will be turned off automatically
5.7 Button Descriptions
EN 6
5. Using the Device
Buttons
Press twice to redial last number
Press to answer call;
Press and hold to reject call
Press to end call
Press and hold to power on / off
Status Functions
Press to pause / play
Press to decrease the volume
Press and hold for previous track;
Press to decrease the volume
(tone: "Dudu" when minimum)
Press to increase the volume
Press and hold for next track;
Press to increase the volume
(tone: "Dudu" when maximum)
-
Standby
Ringing
During phone call
Playing music
During phone call
Playing music
During phone call
Playing music
Standby /
Playing Music
Press to toggle between Bluetooth / TF
modes; Press and hold for deactivating /
activating the breathing LED (deactivate
for longer battery life)
5.8 LED Indicators
LED indicator lights in Red. LED indicator lights in Blue when fully charge
Charging
LED indicator flashes in Blue and GreenPairing
Status LED Behavior
Bluetooth Mode: LED indicator blinks in Blue
Operating TF Mode: LED indicator blinks in Green every 2 seconds
Aux-in Mode: the headset automatically turns off and LED
indicator goes off
