promethean AV322 User manual

AV322 Visual Presenter
Quick Reference Guide
English - 0

1. Package Contents
AV322 Quick Reference Guide User Manual
(For other languages,
please refer to the CD-Rom
or visit website)
ActiView Quick
Reference Guide CD Remote Control

USB Cable C-Video Cable VGA Cable
Microscope Adapter Accessory Pouch Presenter Protector Bag
Power Cord (USA) Power Cord (UK) Power Cord (EC)
English - 1

2. System Diagram
Monitor Television PCProjector
PC
English - 2

3. Product Overview
1. Gooseneck
2. Lamp
5. Remote sensor
3. Control panel
4. LED indicator
6. Lens
7. DIP switch
(Bottom)
English - 3

4. Connecting Devices
4.1 Step 1: Plugging in the Power Outlet
AC Outlet
English - 4
<Note> Appearance of power cord may vary depending on
country/region.
4.2 Step 2: Connecting projector with other hardware devices
4.2.1 Connecting to a Projector or Monitor
zConnect the VGA cable to the VGA OUT port on the AV322 and to the
VGA IN port on the projector or monitor.
4.2.2 Connecting to a TV
1.Connect the C-VIDEO cable to the C-VIDEO port on the AV322 and the
C-VIDEO port on the TV.
2.Adjust DIP Switch Setting

NTSC: America, Taiwan, Panama, Philippine, Canada, Chile, Japan, Korea and
Mexico.
234
1

PAL: Country/region not listed above.
1
234
<Note>: OSD is not available in C-VIDEO. Some functions are not
available on the control panel and the remote control in this mode.
<Note>: VGA OUT is not supported once C-VIDEO is enabled.
3.DIP switch settings will not availabe until the AV322 has been restarted.
4.2.3 Connecting to a Computer
zConnecting to a computer through USB
Connect the USB cable to the USB port on the AV322 and the USB port on
the computer. Next, install the supplied ActiView program.
zConnecting to a computer through VGA IN
Connect the VGA cable to the VGA IN port on the AV322 and the VGA
OUT port on the computer.
English - 5

zConnecting to a computer through RS-232
Connect the RS-232 adapter (Optional) to the RS-232 port on the AV322
and the RS-232 port on the computer.
5. Start Using the AV322
5.1 Powering on the AV322
Control Panel Remote Control
zWhen using the remote control, aim at the remote sensor at the
AV322 and press the power button.
zOnce the Visual Presenter is turned on, the LED on the projector will
flash a few times and then stay lit. Please contact your distributor if
LED is not on.
*For a detailed introduction to menu functions and additional operating
instructions, please refer to the user manual.
English - 6