Prorack K598 User manual

K598
Fitting Kit
EN Fitting Instructions for Basic Carrier
x 4 x 4 x 4
Revision No: 2C 1

Fitting Kit K598
MAX kgs (lbs)
W/P WHD
Chevrolet
Cruze , 5dr Hatch 01-08 NZ 50 kgs (110 lbs) 50 kgs (110 lbs)
Holden
Cruze , 5dr Hatch 01-08 AU 50 kgs (110 lbs) 50 kgs (110 lbs)
Suzuki
Ignis , 5dr Hatch 00-06 AU 50 kgs (110 lbs) 50 kgs (110 lbs)
Ignis , 5dr Hatch 00-06 EU 50 kgs (110 lbs) 50 kgs (110 lbs)
2

Fitting Kit EN
K598
First Time Installation
●Remove parts from inside the package and
check. Contact your dealer if any parts are
missing or damaged.
●This kit fits type A, B, C and D.
●These instructions show type A crossbar
fitted. They also apply to type B, C and D.
NOTE: Clamp images in these instructions may
not be representative of the clamps in this kit
3

Fitting Kit EN
K598
●Use keys to remove covers.
●Use hex screwdriver to reverse adjusting
screw 10 turns.
●Press adjusting screw and pull crossbar
legs out. Refer to the crossbar instructions
for crossbar adjustment.
●Ensure each end of the crossbar is
adjusted equally.
4

Fitting Kit EN
K598
●Remove locking screw.
●Apply protective strip as shown.
Trim if required.
●Attach clamp to each leg. NOTE; clamps
may have labels showing their positions on
the vehicle (For example; "Front Right").
5