Prorack K765 Operation and installation manual

K765
Fitting Kit
EN Fitting Instructions for Basic Carrier
x 1 x 1 x 1 x 1
x 4 x 4 x 4 x 4
x 1 x 1
Revision No: 6F 1

Fitting Kit K765
MAX kgs (lbs)
W/P WHD
Mazda
3, 5dr Hatch Oct 13-+ NZ 75 kgs (165 lbs) 75 kgs (165 lbs)
3, 5dr Hatch Oct 13-+ AU 75 kgs (165 lbs) 75 kgs (165 lbs)
3, 5dr Hatch Oct 13-+ EU 75 kgs (165 lbs) 75 kgs (165 lbs)
3, 5dr Hatch Oct 13-+ ZA 75 kgs (165 lbs) 75 kgs (165 lbs)
3, 5dr Hatch Oct 13-+ US 75 kgs (165 lbs) 75 kgs (165 lbs)
3, 5dr Hatch Oct 13-+ CN 75 kgs (165 lbs) 75 kgs (165 lbs)
Axela, 5dr Hatch Oct 13-+ NZ 75 kgs (165 lbs) 75 kgs (165 lbs)
CX-3, 5dr SUV 15-+ AU 75 kgs (165 lbs) 75 kgs (165 lbs)
CX-3, 5dr SUV 15-+ NZ 75 kgs (165 lbs) 75 kgs (165 lbs)
CX-3, 5dr SUV 15-+ ZA 75 kgs (165 lbs) 75 kgs (165 lbs)
CX-3, 5dr SUV 15-+ EU 75 kgs (165 lbs) 75 kgs (165 lbs)
Hyundai
Accent, 5dr Hatch 15-+ AU 75 kgs (165 lbs) 75 kgs (165 lbs)
Accent, 5dr Hatch 15-+ CN 75 kgs (165 lbs) 75 kgs (165 lbs)
Accent, 5dr Hatch 15-+ NZ 75 kgs (165 lbs) 75 kgs (165 lbs)
Accent, 5dr Hatch 15-+ ZA 75 kgs (165 lbs) 75 kgs (165 lbs)
i30, 5dr Hatch 15-+ AU 75 kgs (165 lbs) 75 kgs (165 lbs)
i30, 5dr Hatch 15-+ CN 75 kgs (165 lbs) 75 kgs (165 lbs)
i30, 5dr Hatch 15-+ EU 75 kgs (165 lbs) 75 kgs (165 lbs)
i30, 5dr Hatch 15-+ NZ 75 kgs (165 lbs) 75 kgs (165 lbs)
i30, 5dr Hatch 15-+ ZA 75 kgs (165 lbs) 75 kgs (165 lbs)
2

Fitting Kit K765
X
A B C 1 2 3
3, 5dr Hatch Oct 13-+ (NZ) -250mm 440mm - 940mm 880mm -
-9 -13/16ths" 17 5/16ths" - 37" 34 5/8ths" -
3, 5dr Hatch Oct 13-+ (AU) -250mm 440mm - 940mm 880mm -
-9 -13/16ths" 17 5/16ths" - 37" 34 5/8ths" -
3, 5dr Hatch Oct 13-+ (EU) -250mm 440mm - 940mm 880mm -
-9 -13/16ths" 17 5/16ths" - 37" 34 5/8ths" -
3, 5dr Hatch Oct 13-+ (ZA) -250mm 440mm - 940mm 880mm -
-9 -13/16ths" 17 5/16ths" - 37" 34 5/8ths" -
3, 5dr Hatch Oct 13-+ (US) -250mm 440mm - 940mm 880mm -
-9 -13/16ths" 17 5/16ths" - 37" 34 5/8ths" -
3, 5dr Hatch Oct 13-+ (CN) -250mm 440mm - 940mm 880mm -
-9 -13/16ths" 17 5/16ths" - 37" 34 5/8ths" -
Accent, 5dr Hatch 15-+ (AU) -250mm 650mm - 835mm 832mm -
-9 -13/16ths" 25 9/16ths" - 32 7/8ths" 32 3/4ths" -
Accent, 5dr Hatch 15-+ (CN) -250mm 650mm - 835mm 832mm -
-9 -13/16ths" 25 9/16ths" - 32 7/8ths" 32 3/4ths" -
Accent, 5dr Hatch 15-+ (NZ) -250mm 650mm - 835mm 832mm -
-9 -13/16ths" 25 9/16ths" - 32 7/8ths" 32 3/4ths" -
Accent, 5dr Hatch 15-+ (ZA) -250mm 650mm - 835mm 832mm -
-9 -13/16ths" 25 9/16ths" - 32 7/8ths" 32 3/4ths" -
Axela, 5dr Hatch Oct 13-+ (NZ) -250mm 440mm - 940mm 880mm -
-9 -13/16ths" 17 5/16ths" - 37" 34 5/8ths" -
CX-3, 5dr SUV 15-+ (AU) -235mm 420mm - 840mm 783mm -
-9 -1/4ths" 16 9/16ths" - 33 1/16ths" 30 13/16ths" -
CX-3, 5dr SUV 15-+ (NZ) -235mm 420mm - 840mm 783mm -
-9 -1/4ths" 16 9/16ths" - 33 1/16ths" 30 13/16ths" -
CX-3, 5dr SUV 15-+ (ZA) -235mm 420mm - 840mm 783mm -
-9 -1/4ths" 16 9/16ths" - 33 1/16ths" 30 13/16ths" -
CX-3, 5dr SUV 15-+ (EU) -235mm 420mm - 840mm 783mm -
-9 -1/4ths" 16 9/16ths" - 33 1/16ths" 30 13/16ths" -
3

Fitting Kit K765
i30, 5dr Hatch 15-+ (AU) -195mm 590mm - 870mm 836mm -
-7 -11/16ths" 23 1/4ths" - 34 1/4ths" 32 15/16ths" -
i30, 5dr Hatch 15-+ (CN) -195mm 590mm - 870mm 836mm -
-7 -11/16ths" 23 1/4ths" - 34 1/4ths" 32 15/16ths" -
i30, 5dr Hatch 15-+ (EU) -195mm 590mm - 870mm 836mm -
-7 -11/16ths" 23 1/4ths" - 34 1/4ths" 32 15/16ths" -
i30, 5dr Hatch 15-+ (NZ) -195mm 590mm - 870mm 836mm -
-7 -11/16ths" 23 1/4ths" - 34 1/4ths" 32 15/16ths" -
i30, 5dr Hatch 15-+ (ZA) -195mm 590mm - 870mm 836mm -
-7 -11/16ths" 23 1/4ths" - 34 1/4ths" 32 15/16ths" -
4

Fitting Kit EN
K765
First Time Installation
●Remove parts from inside the package and
check. Contact your dealer if any parts are
missing or damaged.
●This kit fits type A, B, C and D.
●These instructions show type A crossbar
fitted. They also apply to type B, C and D.
●Use keys to remove covers.
5

Fitting Kit EN
K765
●Use hex screwdriver to reverse adjusting
screw 10 turns.
●Press adjusting screw and pull crossbar
legs out. Refer to the crossbar instructions
for crossbar adjustment method.
●Ensure each end of the crossbar is
adjusted equally.
●Attaches to factory-fitted mounting points
●Please check the front of this manual for
information relating specifically to your
vehicle.
●Adjust crossbar in or out to suit vehicle.
Refer to the crossbar instructions for
crossbar adjustment.
6

Fitting Kit EN
K765
●Tighten adjusting screw to 5 Nm (3.7 ft lb)
hand tight.
●Remove plastic clamp block by gripping bar
leg with fingers and push firmly with
thumbs until clamp block drops out behind
leg.
●Select plastic internal block (from fitting kit)
and insert into foot.
●Repeat for all legs.
7

Fitting Kit EN
K765
Fitment
●Hyundai Only
●Open or remove fixed-point covers.
Fitment
●Lift and pull ditch moulding back towards
you and remove from the vehicle.
●Mark a reference point for the front and
rear mounting points with a pen as shown.
8

Fitting Kit EN
K765
●Use drill bit supplied, to drill holes in
marked positions.
●Re-install rubber ditch mould back into roof
channel and click into place.
●Select grubscrews and screw into the
vehicle's fixed points.
●Do not over tighten.
●Repeat for all four positions.
9

Fitting Kit EN
K765
●Refer to the underside of the pad for the
part number.
●It is important to put the pads in the correct
position on the vehicle.
●Letters refer to the pad part numbers and
position.
●Pad Part Number:
A = 293A
B = 294A
C = 295A
D = 296A
●Hyundai Only
●Pad Part Number:
A = 295A
B = 296A
C = 293A
D = 294A
●Place crossbars on pads ensuring the pads
fit into the holes underneath the foot and
the grubscrew passes through the hole in
the foot.
●Repeat for all four positions.
10