ProRunner X1 User manual

X1 Walk treadmill Operating Instructions
Special tips:
A. Before installation and operation, please read this operation manual carefully.
B. Please save this manual for future reference.
C. Product may vary slightly from the item pictures due to model upgrade.

１
IMPORTANT SAFETY INSTRUCTIONS
Danger–To reduce the risk of electric shock disconnect your treadmill from the electrical
outlet prior to cleaning and/or service work.
DO NOT USE AN EXTENSION CORD: DO NOT ATTEMPT TO DISABLE THE
GROUNDED PLUG BY USING IMPORPER ADAPTERS OR IN ANY WAY MODIFY THE
CORD SET.
1) Install the treadmill on a flat level surface with access to correct voltage and
frequency, grounded outlet.
2) Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both
carpet and treadmill may result.
3) Do not block the rear of the treadmill. Provide a minimum of 1 meter clearance
between the rear of the treadmill and any fixed object.
4) Place your unit on a solid, level surface when in use.
5) Never allow children on or near the treadmill.
6) When running, make sure the plastic clip is fastened on your clothing. It is for your
safety, should you fall or move too far back on the treadmill.
7) Keep hands away from all moving parts.
8) Never operate the treadmill if it has a damaged cord or plug.
9) Keep the cord away from heated surfaces.
10) Do not operate where aerosol spray products are being used or where oxygen is
being administered. Sparks from the motor may ignite a highly flammable
environment.
11) Never drop or insert any object into any openings.
12) The treadmill is intended for in-home use only and not suitable for long time
running.
13) To disconnect, turn all controls to the off position, remove the safety key, and then
remove the plug from the outlet.
14) The pulse sensors are not medical devices. Various factors, including the user’s
movement, may affect the accuracy of heart rate readings. The pulse sensors are
intended only as exercise aids in determining heart rate trends in general.
15) Use handrails provided; they are for your safety.
WARNING - Read all instructions before using this treadmill. It is important your
treadmill receives regular maintenance to prolong its useful life. Failing to
regularly maintain your treadmill may void your warranty.

２
16) Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable
for use on your treadmill. Quality athletic shoes are recommended to avoid leg
fatigue.
17) Allowed temperature: 5 to 40 degrees.
Remove the safety key after use to prevent unauthorized treadmill operation.
IMPORTANT ELECTRICAL INFORMATION
WARNING!
1) NEVER use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill.
Route the power cord away from any moving part of the treadmill including the
elevation mechanism and transport wheels.
2) NEVER operate treadmill on Generator or UPS power supply.
3) NEVER remove any cover without first disconnecting AC power.
4) NEVER expose this treadmill to rain or moisture. This treadmill is not designed for
use outdoors, near a pool, or in any other high humidity environment.
IMPORTANT OPERATION INSTRUCTIONS
1) Insert the power plug into the socket directly.
2) The constant running time is less than 2 hours. Be sure to read the entire manual
before operating your machine.
3) Understand that changes in speed and incline do not occur immediately. Set your
desired speed on the computer console and release the adjustment key. The
computer will obey the command gradually.
4) Use caution while participating in other activities while walking on your treadmill;
such as watching television, reading, etc. These distractions may cause you to
lose balance or stray from walking in the Centre of the belt; which may result in
serious injury.
5) In order to prevent losing balance and suffering unexpected injury, NEVER mount
or dismount the treadmill while the belt is moving. This unit starts with a very low
speed. Simply standing on the belt during slow acceleration is proper after you
have learned to operate this machine.
6) Always hold on to handrail while making control changes.

３
7) A safety key is provided with this machine. Remove the safety key will stop the
walking belt immediately; the treadmill will shut off automatically. Insert the safety
key will reset the display.
8) Do not use excessive pressure on console control keys. They are precision set to
function properly with little finger pressure.
9) This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety, Children should be
supervised to ensure that they do not play with the appliance.
10) Please consult your doctor at first before running, if you have one of the following
diseases:
a. Cardiopathy, hypertension, sugar diabetes, respiratory disease, smoking,
and other chronic diseases, complication disease.
b. If you are over 35 years old and heavier than common weight.
c.Women in pregnant or in breasting period.
11) Please stop exercising immediately and consult your doctor when you feel giddy,
surfeit, thorax ache or other symptoms.
12) Please drink adequate water after taking exercises on our treadmill for more than
20 minutes.
Warning: Now here we suggest that you should consult with your physician or health
professional before starting your workout, especially for the age up to 35 old or once-health
problem people. We take no responsible for any troubles or hurts if you don’t following our
specification. Treadmill will be carefully assembled and covered the motor shield, then
connect to the power.

４
No.
Description
Specification
Qty
A
Walking treadmill
1
B
Remote control
1
C
Power wire
1
D
Safety key
1
E
Wrench
1
F
Lubricant Oil
20ml/bottle
1
G
Manual
1
CARTON CONTENTS:

５
1.WALKING TREADMILL
①.WALKING BELT
②.DISPALY PANEL
③.SAFETY KEY HOLE
④.WHEEL
⑤.OVERLOAD PROTECTOR BUTTON
⑥.SQUARE SWITCH
⑦.POWER SOCKET
⑧.WHEEL
2.LED WINDOW DISPLAY:
Displays time, distance, calories, steps and speed value in turn every 5 seconds.
ROGRAMS
Initial
Default Value
Set Range
Display Range
TIME(MIN:SECOND)
0
-
-
0：00--59：59(MIN)
/1：00－18：00 (HOUR)
SPEED(KM/H)
0.0
0.8
0.8-6.0
0.8-6.0
DISTANCE(KM)
0
-
-
0.0--99.9
STEP
0
-
-
0-99999
CALORIE(KCAL)
0
-
-
0--9999
FUNCTION INSTRUCTIONS
Display time Display speed Display distance Display calories Display steps

６
3.REMOTE CONTROL FUNCTIONS:
Note: If the treadmill does not respond to the remote control, you will need to resync the treadmill
and remote control. To sync the remote control with the treadmill, press witch button to switch off
the treadmill first, then press switch button to switch on the treadmill, meanwhile hold on (Keep
pressing around 5 second ) START/PAUSE button before power on till you hear one "BI" sound from
treadmill that means the remove control was connected to treadmill successfully. then user could
start work out.
1.SPEED + BUTTONS: Press this button to increase the speed.
②.SPEED – BUTTONS: Press this button to decrease the speed.
③.DISPLAY SWITCH BUTTON: When in use,you can press this button to switch
the display between time, distance, calories, steps and speed value.
④.START/PAUSE BUTTON: Press this button to start or pause the machine.
⑤.STOP BUTTON: Press this button to stop the machine.
⑥.BATTERY COVER
NOTE: When attempting to get off of the treadmill but you do not press the Start/Pause
button, the treadmill will stop automatically within 10 seconds. If you want to continue
exercising, restart the treadmill.
LUBRICATION REMINDER
Your treadmill needs lubrication maintenance every 300 KM. The system will
release a beeping sound every 10 seconds and display an “OIL” icon on your

７
display to remind you when it’s time. Please read the LUBRICATING THE
TREADMILL on Page 12 to learn the proper steps to lubricating your machine.
Apply the lubricating oil to the middle of the running deck on both sides. After
application, press and hold the STOP button for 3 seconds to clear the reminder.
POWER SAVE FUNCTION:
When the treadmill has been idle for 10 minutes, it will enter Power Saving Mode.
While the treadmill is in this mode, the window display of the computer will be
turned off. To turn it back on, press any button.
POWER ON:
Flick the power switch to this symbol to turn on the treadmill.
POWER OFF:
Flick the power switch to this symbol to turn the treadmill off at anytime. This
includes during exercise.

８
OPERATING INSTRUCTIONS

９
PROBLEM
POSSIBLE CAUSE
SUGGESTED ACTION
Treadmill will not start
Not plugged in
Plug cord into outlet
Safety Key not inserted
Insert Safety Key
Running belt not
centered
Running belt tension not
correct on the left or right
sides of the running board
Tighten the adjustment bolts on
the left and right side of the rear
roller
Computer not
working
Wires from the computer
Check wire connections
and bottom control board not
properly connected.
from the computer to the control
board.
Transformer is damaged
If the transformer is damaged,
contact customer service.
0001 ERROR:
Message failure
Wires from the computer and
bottom control board not
properly connected.
Check wire connections from the
computer to the control board. If
the wire has been punctured or
damaged, you will need to
replace it. If the problem is not
rectified, you may need to
replace the control board.
0002 ERROR: Burst
clash protection
Incoming voltage is lower
than 50% of the required
voltage.
Check that the incoming power
supply is the correct voltage.
0005 ERROR:
Current overload
protection (Self
Protecting System)
The incoming voltage is too
low or too high. The control
board is damaged.
Restart the treadmill. Check the
incoming voltage to ensure it’s
correct. Check the control board,
replace if damaged.
TROUBLE SHOOTING

１０
A moving part of the treadmill
is stuck and therefore the
motor is unable to rotate
properly.
Inspect moving parts of the
treadmill to ensure that they are
operating correctly. Check the
motor, listen for strange noise
and check for a burning smell.
Replace the motor if necessary.
0006 ERROR: Motor
Abnormality
The motor wire is not
connected or the motor is
damaged.
Check motor wires to see if the
motor is connected. If the wire
has been punctured or damaged,
you will need to replace it. If the
problem is not rectified, you may
need to replace the motor
0008 ERROR:
Control Board
Abnormality
The control board is not
connected.
Check the upper and middle
wires to see if the control board is
connected. If the wire has been
punctured or damaged, you will
need to replace it. If the
problem is not rectified, you may
need to replace the control board.
0009 ERROR:
Inversion error
The treadmill sets upright or
not placed horizontally
Adjust the treadmill and place it
horizontally.
The wires of the control board
can not connect well, replace a
new control board.
0010 ERROR:Motor
Abnormality
The motor is damaged or a
moving part of the treadmill is
stuck and therefore the motor
is unable to rotate properly.
Inspect moving parts of the
treadmill to ensure that they are
operating correctly.
Replace the motor if necessary.

１１
1.Clean the machine
2、Adjust the walking belt
3、Walking belt lubricant:
General cleaning will help prolong the life and
performance of your treadmill. Keep the unit clean
and maintained by dusting the components on a
regular basis. Clean both sides of the running belt
to prevent dust from accumulating underneath the
belt. Keep your running shoes clean so that dirt
from your shoes does not wear out the running
board and belt. Clean the surface of the running
belt with a clean damp cloth.
Place the treadmill on level ground and set it at
4kmph to check if the Walking
Belt (No. C07) drifts.
1.If the Walking Belt (No. C07) moves to the left,
turn the adjusting bolt on
the left side 1/2 turn clockwise,
2.If the Walking Belt (No. C07) moves to the right,
turn the adjusting bolt on
the right side 1/2 turn clockwise,
3.If the Walking Belt (No. C07) will loosen. To
tighten the belt turn the Left &Right side
adjustment bolts 1/2 turn clockwise.
Lubricating the walking board and walking belt is
essential as the friction between the two affects the
life span and function of the treadmill, therefore it is
suggested that the running board and belt be
inspected regularly.
1.Raise the belt up on one side and apply lubricant
to the running deck. Use a
rag to thoroughly wipe the lubricant over the running
deck.
2.Repeat this process for the other side.
MAINTENANCE & CARE

１２
EXPLODED DRAWING

１３
No.
Description
Specification
Qty
No.
Description
Specification
Qty
A01
Main frame
1
D15
Screw
ST2.5*6.0
8
A02
Running board
strengthen tube
1
D16
Screw
ST2.9*6
5
B01
Front roller
1
D17
Spring Washer
8
2
B02
Rear roller
1
D18
Flat Washer
8
2
B03
Allen wrench
5mm
1
D19
Washer
8
2
B04
Safety key plate
1
D20
Washer
6
3
C01
Motor top cover
1
D21
Screw
ST4.2*12(head with
washer)
5
C02
Motor bottom cover
1
D22
Screw
ST4.2*20
2
C03
Foot pad
2
D23
Bolt
M6*25
2
C04
Left End Cap
1
E01
Console
1
C05
Right End Cap
1
E02
Control Board
1
C06
Side Rail
2
E03
Console
communication wire
1
C07
Running Belt
1
E04
Remote control
1
C08
Rubber cushion
6
E05
AC Single Line
Blue
1
C09
Motor Belt
1
E06
AC Single Line
Brown
2
C10
C shape foot pad 2
2
E07
Speed sensor
1
C11
Big rubber washer
1
E08
Safety key
1
C12
Adjustable wheel
2
E09
Motor
1
C13
Console board cover
1
E10
Overload Protector
1
C14
Optical grating
1
E11
Square Switch
1
D01
Nut
M8
2
E12
Running board
1
D02
Nut
M6
4
E13
Magnetic Ring
1
D03
Bolt
M8*40
2
E14
Magnetic Core
1
D04
Bolt
M8*15
2
E15
Power Wire
1
D05
Bolt
M6*46
2
E16
AC Single Line
Blue
1
D06
Bolt
M6*45
1
E17
AC Single Line
Brown
1
PARTS LIST

１４
D07
Bolt
M6*55
2
E18
Grounding Wire
1
D08
Bolt
M6*28
2
E19
Power socket
1
D09
Bolt
M5*16
4
F01
AC Single Line
Optional
1
D10
Bolt
M5*12
2
F02
AC Single Line
Optional
1
D11
Screw
ST4.2*50
6
F03
Grounding Wire
Optional
1
D12
Screw
ST4.2*12
2
F04
Filter
Optional
1
D13
Screw
ST2.9*8.0
2
F05
Screw
ST4.2*12,Optional
2
D14
Screw
ST2.9*8.0
2
F06
Screw
ST4.2*12,Optional
1