ProsKit SS-206 User manual
Thank you for purchasing the SS-206/SS-207 Temperature-Controlled Soldering Station.
Please read this manual before operating the SS-206/SS-207 the manual in a safe, easily accessible
place for future reference.
Features
• Comply with CE, ESD safe certification.
• Temperature range 200 - 480ºC (392-896℉)
• Soldering iron handles are insulated and ergonomic-designed for ease and comfort.
• CPU Control, ceramic heater offer stable power and fast thermal recovery
• Celsius or Fahrenheit temperature unit selection
• Control IC modular design for easy and quickly repair.
• Stackable to conserve bench space
Packing List
Please check the contents of the Soldering station package and confirm that all the items listed below are
included.
Soldering Station………..…………1 Iron Stand（with cleaning sponge）….………………..1
Soldering Iron………………………1 User’s Manual……………….……………………………1
Power Cord…………………………1
Precautions
In this instruction manual, "caution" are defined as follows.
CAUTION:
Misuse may potentially cause injury to the user or physical damage to the objects involved.
For your own safety, be sure to comply with these precautions.
When the power is on, the tip temperature is between 200°C/392°F and 480°C/ 896°F. Since mishandling
may lead to burns or fire, be sure to comply with the following precautions.
Do not touch the metallic parts near the tip.
Do not use the product near flammable items.
Advise other people in the work area that the unit can reach a very high temperature and should be
considered potentially dangerous.
Turn the power off while taking breaks and when finished using the unit.
Before replacing parts or storing the unit, turn the power off and allow the unit to cool to room
temperature.
To prevent damage to the unit and ensure a safe working environment, be sure to comply with the
following precautions.
Do not use the unit for applications other than soldering.
Do not rap the soldering iron otherwise subject the iron to severe shocks.
Do not modify the unit.
Use only genuine replacement parts.
Do not wet the unit or use the unit when your hands are wet.
The soldering process will produce smoke, so make sure the area is well ventilated.
While using the unit, don't do anything which may cause bodily harm or physical damage.
1
Names of Parts
Calibrator
Temperature
display
Power switch
℃/ ℉Switch
Soldering iron
Temperature
control knob
Soldering iron
rece
p
tacle
Heater lamp
SS-207
SS-206
Temperature
control knob
Calibrator
Power switch
Heater lamp
Soldering iron
Soldering iron
rece
p
tacle
Soldering
iron stand
Cleaning
sponge
2
Specification
Model No. SS-206B SS-206E SS-206H SS-206E7
Display Analog
Voltage(V) AC 110V/220V Switch AC 127V/240V Switch
Power consumption 60W
Output voltage 24VAC
Heater Ceramic heater
Temperature range 200℃-480℃(392℉-896℉)
Station size (mm) 115x95x130
Standard Plug B type E type H type E type
Fuse 250V / 2A
Replacement heater 9SS-900-HT
Replacement handpiece 5SS-200-IRON
Individual packing Color Box
Model No. SS-207B SS-207E SS-207H SS-207E7
Display Digital
Voltage(V) AC 110V/220V Switch AC 127V/240V Switch
Power consumption 60W
Output voltage 24VAC
Heater Ceramic heater
Temperature range 200℃-480℃(392℉-896℉)
Station size (mm) 115x95x130
Standard Plug B type E type H type E type
Fuse 250V / 2A
Replacement heater 9SS-900-HT
Replacement handpiece 5SS-200-IRON
Individual packing Color Box
Replacement Tips:
Setting up & operating the Soldering Station
3
Warning:
Before use, please make sure the AC voltage, and turn the AC 110/220V switch to the correct position.
CAUTION: the sponge is compressed. It will swell when moistened with water.
A. Iron Holder
Before using the unit, dampen the sponge with the water and squeeze it dry.
CAUTION: Be sure to turn off the power switch before connecting or disconnecting the soldering iron.
Failure to do so may damage the P.W.B.
B. Connections
1. Connect the soldering iron cord into the receptacle.
2. Place the soldering iron on the iron holder.
3. Plug the power cord into the power supply. Be sure to ground the unit.
SS-206 SS-207
C. Set the Temperature
1. Turn the power switch on.
2. Set the temperature control knob to the desired temperature.
3. The heater lamp blinks on and off when the tip temperature reaches the set temperature. The unit is
now ready to perform soldering work.
4. Lock the knob. (Only for SS-206 Model as shown)
．Set the control knob to desired temperature.
．Tighten the screw of inside control knob by Phillips screwdriver.
．Release screw anticlockwise before reset temperature.
For user convenience, and soldering efficiency, two stations can be stacked securely.
CAUTION: The soldering iron must be placed on the iron holder when not in use.
Tip maintenance and use
Tip temperature
High soldering temperature can degrade the tip. Use the lowest possible soldering temperature.
The excellent thermal recovery characteristics ensure efficient and effective soldering even at low
temperatures. This also protects the soldered items from thermal damage.
Cleaning
4
This manual suits for next models
6
