ProVisual CB-2085IR-WDR User manual

ProVisual, INC.
www.provisualusa.com
3399 NW 72nd Ave. Suite 123
Miami, Florida 33122. United states
Phone:[phone]
Ultra Wide Dynamic
IR Waterproof Bullet Camera
User's Manual

1. Overview
CB-2085IR-WDR
1
2.Notes
2
SW series Ultra WDR cameras are new, CCTV cameras which adopt Pixim's
innovative “SEAWOLF” image sensor chip based on Digital Pixel System ® technology.
The resolution is up to 690TVL-E and the industry-leading wide dynamic range is up to
120dB. This WDR ensures brilliant image quality under any lighting environment. The
image and color quality is also excellent in low illumination environments. This camera
series is a ultra wide dynamic range camera in the real sense using digital sampling
which can't be paralleled by average wide dynamic range cameras using older
generation CCD images. The application of 3D digital noise reduction technology
ensures higher S/N, which efficiently reduces the digital storage and transmission data
saving system cost. Fashionable and professional exterior design and special all-in-
one all directional bracket, makes round-the-clock surveillance easy and convenient.
1. Use the appropriate power supply
The input power will be AC24V or DC12V/AC24V dual-power. Be sure to connect
it to the appropriate power. Wrong connection may cause malfunction and/or damage
to the camera.
2. Do not attempt to disassemble the camera.
To avoid electric shock, do not remove screws or camera housing. There are no user
serviceable parts inside. Ask a qualified service person for servicing.
3. Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged
by improper handling or storage.
4. Do note use strong or abrasive detergents when cleaning the camera body.
Use a dry cloth to clean the camera when it is dirty. In case the dirt is hard to remove,
use a mild detergent and wipe gently.
5. Do not attempt to aim the camera at the sun.
Do not attempt to aim the camera at the sun or other extremely bright objects that
cause smear to appear irrespective of whether the camera is operating or not. This
could damage the DPS Sensor.

3.Features
3
Bracket
Elegant and solid combined type bracket, with video and power cable built-in. makes
installation convenient and reliable.
Motion Detection
Motion detection function, blue highlight LED flickers automatically, very
good warning function.
OSD Menu
Powerful OSD menu operation function, allows for setting of various parameters and
pre-sets.
4
Ultra Wide Dynamic Range
The captured wide dynamic range is 102dB typical and can reach 120dB maximum.
Long-effective IR Light Source Design
Adopts high performance IR LED and heat balance
design, effectively extends the service life of LED.
High Effective Resolution
Image resolution as high as 690TVL-E, offering enhanced horizontal and vertical
resolution useable in existing as well as new CCTV systems.
3D Noise Eliminating Technology
Adopts Pixim fully digitalized 3D noise reduction technology to minimize noise,
extending DVR storage by 30%+.
Lower Illumination
0.1Lux low illumination (IR OFF)
IR CUT
Built-in filter switch-over device, ensures the cameras work properly both in day and
night.
This camera adopts innovative DPS (Digital Pixel System) image sensor and image
processing technology. The sensor picks up details from each pixel based on hundreds
of samples per video frame. vs CCD's limited exposures, to ensure wider dynamic
range than is possible with analog CCD. The image quality is even brilliant under
extreme lighting conditions.
"SEAWOLF" Image Sensor
Comparison of Wide Dynamic Range camera and average camera
Average camera with BLC OFF Average camera with BLC ON Ultra Wide Dynamic Range camera
Long-effective IR Light Source Design
IR Sensnsitivity
1yr 2yr 3yr 4yr Service Life
Other bra nds

7
CB-2085IR-WDR
Bracket Installation Plate
12
34
Camera Installation and Adjustment
Bracket Installation Plate
Cardan Shaft
Camera Fixing Screw
Cardan Shaft Fixing Screw
Lens Adjustment
Camera Main
Body
Parts
8
1. Sunshade Screw
2. Sunshade Cover
3. Lens
4. IR LED
5. Lens Adjustment Button
6. Menu Button
7. Cooling Fan
8. Cardan Shaft
9. Bracket Installation Plate
10. Cardan Shaft Fixing Screw
11. Camera Fixing Screw
1. Set the camera installation location and fix the bracket installation plate with
expansion bolt.
2. Fix the camera main frame to bracket installation plate with screws.
3. Turn the cardan shaft and settle the camera at the required angle and then fix the
cardan shaft tightly.
4. Set OSD menu and adjust lens.
Dimension(Unit: mm)
11
MD
ENTER

9
ENTER: Enter or exit menu
Move up and down by Up and Down button
Move horizontally or modify parameter by Left and Right button
OSD Menu Setup
6. Menu Operation
WDR Control:
Press Enter to show the menu, move the cursor to WDR Control, set MEDIUM,
NORMAL, LOW, HIGH by left and right button, choose the setting for WDR in
accordance with the lighting condition, set High in strong lighting contrast to realize
higher quality image.
WDR ZONE SELECT: WD NORMAL AREA/ATM/LOW 1/3.
10
BLC: Move to BLC by Up and Down button, set BLC by Left and
Right button: On and Off.
WHITE BALANCE:
Move to White Balance by Up and Down button, set White balance by Left and Right
button: AWB: Auto White Balance, ATW: Auto Tracking White Balance. The color's
temperature are different in different lighting condition, The color's temperature
changes in different lighting condition, so the white color in video image changes if
the lighting condition changes. AWB means cameras can compensate color
temperature automatically. In some special environment, in order to keep the same
color temperature , ATW setting can keep a fixed color temperature
AGC:
Move cursor to AGC by Up and Down button, set AGC by Left and Right Button as :
NORMAL, LOW and HIGH. Setting AGC is better for cameras to work in wider
lighting range, if the illumination is low, can set AGC high to rise the sensitivity of
cameras.
*Specialists press "Left, Right, Left, Right, Down" button enter superior menu.
ATW
MEDIUM
OFF
NORMAL
OFF
DC
AUTO
ENGLISH
DEFAULT
WDR CONTROL
NORMAL METER PRESETS
BLC
WHITE BALANCE
LENS SELECT
D/N CONTROL
LANGAGE SELECT
AGC
FLUORESCENT
SAVE
(ATW/AWB)
(LOW/NORMAL/MEDIUM/HIGH)
(OFF/ON)
(LOW/NORMAL/HIGH)
(OFF/CRR/CRR2)
(MANUAL/DC)
(OFF/AUTO/GPIO)
(ENGLISH/CHINESE)
(CANCEL)
CAMERA SETUP
WD NORMAL
SAVE
PRESETS
PRE
WDR ZONE SELECT:
NORMAL METER PRESETS
WD NORMAL/SAFE AREA/ATM/LOW 1/3
CANCEL

11
LENS SELECT:
Move cursor to LENS SELECT, set LENS SELECT by Right and Left button as :
MANUAL, DC:DC Automatically. MANUAL FOR MANUAL IRIS LENS, DC for
AUTO IRIS LENS.
FLUORESCENT:
Move cursor to FLUORESCENT by Up and Down button, set by Left and Right button
as: OFF, CRR2: Color Rolling Restrain. Cameras output color rolling image under
fluorescent lamp, CRR can restrain color rolling, keep the image stable.
D/N CONTROL:
Move cursor to D/N Control by Up and Down button, set D/N by Left and Right button
as: OFF, Auto, GPIO: External Control; On. The illumination is very low at night, so
we need to rise the sensitivity and improve imaging quality, then we can get better
image quality. Set D/N in accordance with different actual need.
SAVE&EXIT:
Move cursor to SAVE&EXIT by Up and Down button, set by Left and Right button
as : SAVE&EXIT;DEFAULT,CANCEL.
LANGUAGE SELECT:
Move cursor to LANGUAGE SELECT by Up and Down button, set by Left and Right
button as : ENGLISH, CHINESE.
285 * 96* 125
Technical parameter:
*Specification is subject to change without prior notice
12
Tracking White Balance, Auto White Balance(ATW)
Auto Switch Over
CB-2085IR-WDR
<600mA
Model
Sensor
Video Format
SYNC Mode
Resolution
S/N Ratio
Mini illumination
AGC
White
Balance
BLC
WDR control
Voltage
Current
Lens
Working Temperature
IR Range
Size
Weight
Mode
Automatic
NTSC
INTERNAL
690HTVL-E
0Lux,(IR-ON )
Normal / Low / High
ON, OFF
Auto White Balance 2200K~10000 K
O O
-10 C ~50 C
D/N
OFF, External Control, Auto, ON
Sensor Menu Control Power
IR CUT
1100g
50 M
2.8-12mm Auto iris
DC12V/AC24V
>50dB AGC OFF
1/3” DPS Sensor (SEAWOLF)
Image technology PIXIM 3D Noise Reduction
Ultra Wide Dynamic Range: Medium / Normal / Low / High