ProVisual CDV-2085IR-WDR User manual

Ultra Wide Dynamic
IR Waterproof Dome Camera
User's Manual
ProVisual, INC.
www.provisualusa.com
3399 NW 72nd Ave. Suite 123
Miami, Florida 33122. United states
Phone:[phone]

1.Overview
CDV-2085IR-WDR
SW series Ultra WDR cameras are new, CCTV cameras which adopt Pixim's innovative
“SEAWOLF” image sensor chip based on Digital Pixel System ® technology. The
resolution is up to 690TVL-E and the industry-leading wide dynamic range is up to
120dB. This WDR ensures brilliant image quality under any lighting environment. The
image and color quality is also excellent in low illumination environments. This camera
series is a ultra wide dynamic range camera in the real sense using digital sampling
which can't be paralleled by average wide dynamic range cameras using older
generation CCD images. The application of 3D digital noise reduction technology
ensures higher S/N, which efficiently reduces the digital storage and transmission data
saving system cost. Fashionable and professional exterior design and special all-in-one
all directional bracket, makes round-the-clock surveillance easy and convenient.
1
2.Notes
1. Use the Appropriate Power Supply
The input power will be DC12V or DC12V/AC24V dual-power. Be sure to connect
it to the appropriate power. Wrong connection may cause malfunction and damage to
the video camera.
2. Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers. There are no user
serviceable parts inside. Ask a qualified service person for servicing.
3. Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged
by improper handling or storage.
4. Do note use strong or abrasive detergents when cleaning the camera body.
Use a dry cloth to clean the camera when dirty. In case the dirt is hard to remove
Use a mild detergent and wipe gently.
5. Do not put the camera in a place with interference.
When this camera is installed near the equipment like wireless communication
device which emits strong electromagnetic field, some irregularity such as noise
on monitor screen may happen.
2

3.Features
Ultra Wide Dynamic Range
The captured wide dynamic range is 102dB typical and can reach 120dB maximum.
3
OSD Menu
Powerful OSD menu operation function, allows for setting of various parameters and
pre-sets.
Comparison of Wide Dynamic Range camera and average camera
Average camera with BLC OFF Average camera with BLC ON Ultra Wide Dynamic Range camera
4
All directional bracket
All directional bracket, easy control.
Compatible for DC12V and AC24V voltage. which can shift to the correct
mode as per the power input.
High Effective Resolution
Image resolution as high as 690TVL-E, offering enhanced horizontal and vertical
resolution useable in existing as well as new CCTV systems.
Lower Illumination Working Capability
0.1Lux low illumination (IR OFF).
Long-effective IR Light Source Design
IR Sensnsitivity
1yr 2yr 3yr 4yr Service Life
Other brands
3D Noise Eliminating Technology
Adopts Pixim fully digitalized 3D noise reduction technology to minimize noise,
extending DVR storage by 30%+.
Long-life IR Light Source Design
Adopts high performance IR LED and heat
balance design, effectively extends the service
life of LED.
Built-in filter switch-over device, ensures the cameras work properly both in day and night.
IR-CUT
This camera adopts innovative DPS (Digital Pixel System) image sensor and image
processing technology. The sensor picks up details from each pixel based on
hundreds of samples per video frame. vs CCD's limited exposures, to ensure wider
dynamic range than is possible with analog CCD. The image quality is even
brilliant under extreme lighting conditions or changeable lighting condition.
“SEAWOLF” Image Sensor
DC12V/AC24V Dual Voltage

4.Parts instruction
CDV-2085IR-WDR
5
Focus Zoom
3
4
5
6
7
8
9
10
11
1
2
1. Dome Enclosure: to protect
camera lens and body.
2. Glass cover screw hole
3. Base
4. Wire out hole
5. Stages of a screw the lid
6. OSD
7. IR LED
8. LENS
9. LED ALARM
10. Subpanel
11. Install screws hole
Camera installation
1. Loose the 3 glass cover screws by screwdriver ,
take the glass cover out.
2. Loose the Installed setscrews , to separate the
subpanel from camera body.
3. Drill 3 holes in the position needed
in accordance with the installation hole on
the subpanel ,push the Expansion Bolt inside
then tighten the screws, make the installation
hole aim at the three screws and fix it.
4. Choose the way the wire out, if out from the ceiling,
then need a hole on it, if from the side of the camera,
then just need to loose the Stages of a screw the lid ,
get the wire out from it.
6

7
Adjustment for camera direction
1. When the camera fixed on the ceiling , you can adjust the angle by adjustment of the 3 axis
O O O
bracket. Maximum 355 horizontal rotation, 75 vertical rotation, 35 dipping rotation.
2. Adjust ZOOM to the position you need, then adjust FOCUS to get clearer image.
3. Fix the glass cover on the camera body.
5.Dimensions
CDV-2085IR-WDR
Horizontal Rotation
Vertical Rotation
Dipping Rotation
OSD Menu Setup
Menu button for choice
Move Up And Down By Up And Down Button
Move Horizontally Or Modify Parameter By
Left And Right Button
:
:
6. OSD Menu Operation
8
Menu
Right
Left
Up
Down
*Specialists press "Left, Right, Left, Right, Down" button enter superior menu.
ATW
MEDIUM
OFF
NORMAL
OFF
DC
AUTO
ENGLISH
DEFAULT
WDR CONTROL
NORMAL METER PRESETS
BLC
WHITE BALANCE
LENS SELECT
D/N CONTROL
LANGAGE SELECT
AGC
FLUORESCENT
SAVE
(ATW/AWB)
(LOW/NORMAL/MEDIUM/HIGH)
(OFF/ON)
(LOW/NORMAL/HIGH)
(OFF/CRR/CRR2)
(MANUAL/DC)
(OFF/AUTO/GPIO)
(ENGLISH/CHINESE)
(CANCEL)
CAMERA SETUP
WD NORMAL
SAVE
PRESETS
PRE
WDR ZONE SELECT:
NORMAL METER PRESETS
WD NORMAL/SAFE AREA/ATM/LOW 1/3
CANCEL

9
WDR Control:
Press Enter to show the menu, move the cursor to WDR Control, set MEDIUM,
NORMAL, LOW, HIGH by left and right button, choose the setting for WDR in
accordance with the lighting condition, set High in strong lighting contrast to realize
higher quality image.
WDR ZONE SELECT: WD NORMAL/SAFE AREA/ATM/LOW 1/3.
BLC: Move to BLC by Up and Down button, set BLC by Left and
Right button: ON and OFF.
WHITE BALANCE:
Move to White Balance by Up and Down button, set White balance by Left and Right
button: AWB: Auto White Balance; ATW: Auto Tracking White Balance. The color's
temperature are different in different lighting condition, The color's temperature
changes in different lighting condition, so the white color in video image changes if
the lighting condition changes. AWB means cameras can compensate color
temperature automatically. In some special environment, in order to keep the same
color temperature , ATW setting can keep a fixed color temperature
AGC:
Move cursor to AGC by Up and Down button, set AGC by Left and Right Button as :
NORMAL, LOW and HIGH. Setting AGC is better for cameras to work in wider
lighting range, if the illumination is low, can set AGC high to rise the sensitivity of
cameras.
10
LENS SELECT:
Move cursor to LENS SELECT, set LENS SELECT by Right and Left button as :
MANUAL, DC:DC Automatically. MANUAL FOR MANUAL IRIS LENS, DC for
AUTO IRIS LENS.
FLUORESCENT:
Move cursor to FLUORESCENT by Up and Down button, set by Left and Right button
as: OFF, CRR2: Color Rolling Restrain. Cameras output color rolling image under
fluorescent lamp, CRR can restrain color rolling, keep the image stable.
D/N CONTROL:
Move cursor to D/N Control by Up and Down button, set D/N by Left and Right button
as: OFF, Auto, GPIO: External Control; On. The illumination is very low at night, so
we need to rise the sensitivity and improve imaging quality, then we can get better
image quality. Set D/N in accordance with different actual need.
SAVE&EXIT:
Move cursor to SAVE&EXIT by Up and Down button, set by Left and Right button
as : SAVE&EXIT, DEFAULT, CANCEL.
LANGUAGE SELECT:
Move cursor to LANGUAGE SELECT by Up and Down button, set by Left and Right
button as : ENGLISH, CHINESE.

Technical parameter:
*Specification is subject to change without prior notice
11
Tracking White Balance, Auto White Balance(ATW)
Auto Switch Over
CDV-2085IR-WDR
<450mA
Model
Sensor
Video Format
SYNC Mode
Resolution
S/N Ratio
Mini illumination
AGC
White
Balance
BLC
WDR control
Voltage
Current
Lens
Working Temperature
IR Range
Size
Weight
Mode
Automatic
NTSC
INTERNAL
690HTVL-E
0Lux,(IR-ON )
Normal / Low / High
ON, OFF
Auto White Balance 2200K~10000 K
O O
-10 C ~50 C
D/N
OFF, External Control, Auto, ON
Sensor Menu Control Power
IR CUT
850g
20 M
148( )*112( H )
2.8-12mm Auto iris
DC12V/AC24V
>50dB AGC OFF
1/3” DPS Sensor (SEAWOLF)
Image technology PIXIM 3D Noise Reduction
Ultra Wide Dynamic Range: Medium / Normal / Low / High