ProxiMity UV-Clean UVC-SM User manual
Made in the U.S.A
proximitysystems.com/uvclean
Proximity UVC-SM
PRODUCT GUIDE
REV C /2019
Made in the U.S.A
REV C /2019
1. Quick Guide
2. Quick Set-up
3-4. Set-Up
6. Safety & Disposal
7. How it Works:
Cleaning
Date & Time
8. How It Works:
Records
9. Warranty
Proximity UVC-SM
CONTENTS
Proximity UVC-SM
QUICK GUIDE
REV C /2019
2
1
36
5
Rear View
Front View
Power Cable
5mm , USB-A
DC 5V Power Supply
4
1. Status
Indicator
For Task Light
4. Daisy-Chain
Receptacle
6. Micro-USB
Data
Receptacle
feature
of the LED task Light
Inlet & outlet for
DC 5V supply
included, 5mm jack
Retrieve cleaning
stored internally
5. Power
Receptacle
UVC Unit
Stand
Bracket
P1
Screw
2X
White Blink = Memory Full
Blue Blink = Bulb Failure
White = On, Stand By
Blue = Cleaning
Micro-USB
Data Cable
thin monitors
3/32” Allen Key
Proximity UVC-SM
QUICK SET-UP
REV C /2019P2
Power the device by plugging in the power cable to the supplied adapter, or another
USB 3.0 device with output power of 900 mA.
Set-up is complete.
A USB port, 3.0 or newer.
device is at room temperature only.
More details can be found in this guide if needed.
Check List for Quick Set-Up
Maintenance
Proximity UVC-SM
SET-UP
REV C /2019P3
Place the between
the UVC device and
the main bracket.
Not behind bracket.
( A. ) ( B. )
Plug In Power.
Plug In Power
(supplied adapter
or a USB 3.0.)
data cable and connect to a PC.
Proximity UVC-SM
SET-UP
REV C /2019P4
Two sided adhesive is preinstalled.
Remove the adhesive paper.
. Between the
UVC device and
the main
bracket.
Aligning the rear of the tab
with the front face of the monitor
or device, press down on the metal
Adhere the bracket into place
at the back of the panel
bracket with the included self-adhesive tape.
for
thin
monitor:
Plug In Power.
Plug In Power
(supplied adapter
or a USB 3.0.)
data cable and connect to a PC.
Proximity UVC-SM
DISINFECTION
REV C /2019P5
Area
0o
15o
Rotational Adjustment for Tilt
-
Max.
12.00”
28.00”
10.00”
24.00”
13.00
20.00
20.00
7.00
Proximity UVC-SM
SAFETY & DISPOSAL
REV C /2019P6
Appropriate use of this product is expected and is the responsibility of the purchaser of this product.
This product uses UV-C light. Eyes and skin should be kept from exposure.
Do not use this device on people, food, or pets.
Keep out of Reach of Children. This product is not a toy.
or other local household waste programs.
outdoors.
As suggested by the EPA, do not vacuum up broken glass unless it is the only remaining debris. The same
www.lamprecycle.org/state-local-laws
When done, this prevents mercury from entering the environment and reuse of glass, and metal is possible.
waste programs.
UV Bulb
Locate centers near you: search.earth911.com
EPA www.epa.gov
Federal Universal Waste Rule
Resources
www.lamprecycle.org
baeryresponsibility.org/baery-recycling
Proximity UVC-SM
HOW IT WORKS
REV C /2019P7
It has . can be found in the , under the Home tab.
cleaning cycles and relays the need to run a cleaning cycle when people come and go.
is 240 or 300 seconds.
Save to Device
Cleaning
Set Device To Local Date & Time
located on the Home tab.
Date & Time
(1)
(2)
Proximity UVC-SM
HOW IT WORKS
REV C /2019P8
The area under the lists the number of records stored. Also, the percentage of the
This will permanently eliminate the logged events stored within the UV-Clean device memory.
• Date
• Time
clean me (page 4).
Completed
Interrupted
Bulb Failure: The UV light did not produce UV during the event
If the table (3) is blank, mouse over and click the Refresh From Device
Records
(3)
(4)
Proximity UVC-SM
WARRANTY TERMS
REV C /2019P9
3”
15°
3.1”
2”
6.13”
6”
1.7” 1.4”
6.13”
5.5”
.76”
2.3”
Limited Warranty
Proximity System, Inc (hereaer referred to as ‘Proximity) warrants its manufactured products
t
o be free of defects in materials and workmanship under normal use and service to the original
p
urchase for two (2) years from the date of purchase. Unauthorized modicaon or alteraon of the
p
roduct, improper installaon, and failures from inadeuate inspecon, maintenance or abuse of the
p
roducts will void this warranty. If any Proximity manufactured product is or becomes defecve during
t
he warranty period, Proximity will, at its opon, either repair, exchange or replace defecve unit. The
p
urchaser should contact our Service Department for service. Proximity reserves the right to make
d
esign changes in manufactured products built and/or sold by them at any me without incurring any
o
bligaon to make the same or similar changes to previously designed/built and delivered units.
P
roximity reserves the right to charge for replacement warranted parts or those parts which are found
t
o have failed due to unauthorized modicaon or alteraon of the product, improper installaon,
i
nadeuate inspecon or maintenance, damage in transit, or abuse of the product. Photos and or
a
ddional informaon may be reuested to idenfy defecve parts. Proximity reserves the right to
m
ake modicaons and improvements to products that may create slight dierences in the manual
d
escripons and illustraons.
This guide and any informaon provided are the property of Proximity Systems and not for re-
u
se or publicaon without wrien consent from Proximity Systems.
Proximity Systems, Inc
11301 Boudreaux Rd.
Tomball, TX 77675-7431
E-Mail Address: CustomerService@proximitysystems.com
1-800-437-8111
Table of contents
Other ProxiMity Medical Equipment manuals
Popular Medical Equipment manuals by other brands
TurboMed
TurboMed XTERN FOOT DROP ORTHOTIC KIT Guideline
4healthcare
4healthcare 4H415E60 User instruction manual
Bubble Wall
Bubble Wall 500WM Assembly instruction
ARJO HUNTLEIGH
ARJO HUNTLEIGH Streamline 2211 Instructions for use
I-Tech
I-Tech UT2 user manual
Contec Medical Systems Co.
Contec Medical Systems Co. ESA0015 user manual
