PSG Stronghold Tether Cinch Loop Series Setup guide

Part No. Weight
Rating
Max
Tether
Use With Do Not Use With
TETHCNCHEY-R 10 lbs / 4.53kg 5’ (152.40 cm) Screw drivers,
Nut Drivers,
Brushes, Scissors,
Levels, Adjustable
Wrenches, Pipe
Wrenches, Ratchets,
Hammers and much
more.
Tools with handles
that are not attached.
Tools with holes
that will damage the
tether.
Tether Cinch Loop Series
Installation and Usage Instructions
Please read instructions carefully and fully before
installation and/or usage.
Inspect tool tether hole to
assure there are no burrs
or sharp edges that could
cut the cinch loop.
Pull on the eye hole to
tighten and position to the
desired location.
Insert the rope end loop
through the tool tether hole
as shown and feed the
other end back through the
loop.
Attach tool tether to the
eye hole and begin use.
WARNINGS
ALWAYS WEAR APPROPRIATE PROTECTIVE
EQUIPMENT. DO NOT USE THIS PRODUCT ON OR
NEAR ROTATING EQUIPMENT. IMPROPER USE
COULD RESULT IN DEATH OR DISMEMBERMENT.
IF ANY CRACKS, RIPS OR TEARS ARE NOTED,
PRODUCT REPLACEMENT IS REQUIRED.
Step 1 Step 2
Step 3
TOOL SELECTION GUIDE
INSTALLATION
IMPORTANT INFORMATION:
• Dispose of if a drop is experienced
• Inspect prior to each use for the following and
discard if found:
-wearing of the rope
- degraded stitching
- fraying or cuts to the rope
- deformation of metal components
Step 4
INS-ANSITETHCNCHEY-R-R1
TETHCNCHEY
Ty-Flot, Inc. •305 Massabesic Street •Manchester, NH 03103
www.ty-ot.com •Phone: [phone] •Fax: [phone]
THE DROP STOPS HERE

INSTRUCTIONS