PT W5008 User manual

LIMITED WARRANTY
PERFORMANCE TOOL® extends only the following warranties, and only to original retail purchasers. These
warranties give specific legal rights. Except where prohibited by local law, the law of the State of Washington
governs all warranties and all exclusions and limitations of warranties and remedies. There may be other rights
which vary from state to state.
PERFORMANCE TOOL® warrants the product to be free from defects in materials and workmanship under normal
use and service. A defective product may be returned for a free replacement within 90 days from the date of
purchase, provided that product is returned to place of purchase immediately after discovery of defect. After 90
days and up to one year from date of purchase, PERFORMANCE TOOL® will replace at no charge any parts which
our examination shall disclose to be defective and under warranty. These warranties shall be valid only when a
sales receipt showing the date of purchase accompanies the defective product or defective part (s) being returned.
For part (s) after 90 days, please remit your request, postage prepaid to:
PERFORMANCE TOOL, P.O. Box 88259 Tukwila, WA 98138
These warranties exclude blades, bits, punches, dies, bulbs, fuses, hoses, and other consumables which must be
replaced under normal use and service. These warranties shall not apply to any product or part which is used for a
purpose for which it is not designed, or which has been repaired or altered in any way so as to affect adversely its
performance or reliability, nor shall these warranties apply to any product or part which has been subject to
misuse, neglect, accident or wear and tear incident to normal use and service.
PERFORMANCE TOOL® does not authorize any other person to make any warranty or to assume any liability in
connection with its products.
Except for warranties of title and the limited express warranties set forth above, PERFORMANCE TOOL® makes no
express or implied warranties of any kind with respect to its products. In particular, PERFORMANCE TOOL® makes
no implied warranty of merchantability and no implied warranty of fitness for any particular purpose, except that for
goods purchased primarily for personal, family or household use and not for commercial or business use,
PERFORMANCE TOOL® makes an implied warranty of merchantability (and, if otherwise applicable, an implied
warranty of fitness for a particular purpose), but only for the particular qualities or characteristics, and for the
duration, expressly warranted above.
The laws on limitation of implied warranties may differ from state to state, so the above limitations may not apply in
all cases.
PERFORMANCE TOOL® shall not be liable for consequential, incidental or special damages resulting from or in
any manner related to any product, or to the design, use, or any inability to use the product. The sole and exclusive
remedy for a defective product or part shall be the repair, or replacement thereof as provided above. The laws on
limitation of remedies or on consequential, incidental or special damages may vary from state to state, so the above
limitations may not apply in all cases.
© Copyright 2018 WILMAR CORPORATION, P.O. Box 88259 Tukwila, WA 98138
1500W INFRARED SHOP HEATER
OWNER'S MANUAL
Item Number W5008
On occasion, after printing of our literature is completed, our manufacturers may make changes and/or modifications to merchandise which will not be
reflected in this manual. Although we strive to maintain complete and accurate information, it is possible in some instances, that the product may differ slightly
from printed specifications. Illustrations are intended for reference only. Actual merchandise may vary. Wilmar is not responsible for typographical errors.
Please read these instructions carefully and retain them for future use.
ADJUSTABLE THERMOSTAT
lFor optimum comfort & auto shut-off
MOUNT TO THE WALL OR CEILING
lWith included adjustable hanging brackets
It may be necessary to periodically wipe down the heater and
reflector, depending on the placement and the amount of use.
How to clean the reflector:
1. Disconnect the power cord from the outlet. Be sure heater has
completely cooled.
2. Remove the safety bars by pressing down on the top edge and gently
pulling forward until it releases.
3. Wipe the reflector with a dry soft cloth or one treated with detergent.
MAINTENANCE

1. Adjustable Thermostat
2. Heating Element
3. Protective Covers
PRODUCT FEATURES
1 2
6
5
2
3
3
4
5
1
SPECIFICATIONS
Voltage:..............................................................................................120v
Frequency: ...................................................................................... 60Hz
Power: ........................................................................................... 1500W
Size: ............................................................................23.8 x 7.4 x 3.5 in.
Weight: ............................................................................................4.0 lb.
Read these safety warnings before operation.
WARNING!
• Readtheinstructionscarefullybeforeuseandsavethemanualfor
future reference.
• Removethepackagingandmakesurethattheheaterisintact.Do not
leave the packaging materials, like bags and staples, within the reach
of children.
• Alwaysdisconnecttheheaterfromthemainsupplywhennotinuse
and when cleaning.
• Donotleavetheheater“ON”unattended.
• Toavoidoverheating,donotcovertheheaterorplaceanyobjecton
or in front of the safety bar.
• Keeptheheateradistanceofatleast3feetfromanycombustible
material, such as furniture, curtains, bedding, clothes or papers.
• Keeptheheaterclean.Donotplaceanyobjectsnearorinsidethe
safety bars or heating element, as this may cause electric shock, fire,
or damage to the heater.
• Neverallowthepowercordtotouchwetorhotsurfaces,become
twisted, or be within reach of children.
• Ifthepowercordisdamaged,stopuseimmediatelytoavoiddanger,
and the damaged part must be replaced by the factory or other
similar professional.
• Donotplaceonornearahotgasorelectricburner.
• Nevertouchtheheaterwithwetordamphandsorfeet.
• Neverexposetheheatertoatmosphericconditions(rain,direct
sunlight, snow, etc).
• Donotusetheheaterforanythingotherthanitsintendeduse.This
heater is intended for household use only.
• Donotusetheheaterintheimmediatesurroundingsofwatersuch as
a bath, shower or swimming pool.
• Donotputthepowercordontheheaterwhileitisstillwarm.
• Donotconnecttheheatertoextensioncordsormultipleoutlets.
• Thesafetybarsofthisheaterareintendedtopreventdirectaccessto
heating element and must be in place when the appliance is in use.
• Thisheaterisnotequippedwithadevicetocontroltheroom
temperature. Do not use this heater in small rooms when they are
occupied by persons not capable of leaving on their own, unless
constant supervision is provided.
• Closesupervisionisrequiredwhenheaterisusednearorbychildren.
IMPORTANT SAFETY INFORMATION
Specifications are subject to change without notice
4. Safety Bars
5. Mounting Brackets
6. 8 ft. Grounded Cord

3 4
INSTALLATION ON THE WALL OR CEILING
There are four brackets and fasteners to use with the heater. There are also 4
square fastener washers (0.98 in.) in the slot on the back side of the heater.
STEP 1:
Position the square bolts inside the slot (Figure 1) with 2 of the brackets as
shown in Figure 2. Be sure the distance between the brackets matches the
distance they will be spaced on the wall. Fasten using 4 short screws. A
minimum of 16 inches is suggested.
• Thisheaterisnotintendedforusebyanyone(includingchildren)with
reduced physical, sensory, or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the heater by a person responsible for
their safety.
• Theheatermustnotbeinstalledimmediatelybelowasocketoutlet.
• Exceptforwhenmountingatahighlevel,donotusetheheaterwith a
programmer, timer or any other device that switches the heater on
automatically.
• Before moving the heater, be sure that the power supply is turned off.
IMPORTANT SAFETY INFORMATION
STEP 2:
The other 2 brackets are fastened by using the 4 long screws and their
matching plastic accessories at the appropriate distance on the wall parallel
to the floor (At least 2 yd. from the floor and at least 0.5 yd. from the ceiling)
(Figure 3).
INSTALLATION ON THE WALL OR CEILING
Figure 1.
Figure 2.
Figure 3.
STEP 3:
Join the brackets on the heater with the brackets fastened on the wall using
2 bolts and their matching washers and wing nuts (Figure 4). Install the
heater at the proper angle (in the direction of the area to be heated).
Refer to "Important Notices For Installation" on the next page.
NOTES: Angle of heater can be adjusted by partially loosening the wingnuts,
adjusting the heater angle, then retightening. Be sure the tabs interlock with the
holes in the brackets.
Electric wiring for the heater has to be done by a qualified specialist if needed.
Figure 4.
WARNING! DO NOT DIRECT HEATER AT THE CEILING, WALL OR
OTHER NEARBY SURFACE OR OBJECT.

5 6
IMPORTANT NOTICES FOR INSTALLATION
Install the heater in the horizontal position, i.e. parallel to the floor.
IMPORTANT NOTICES FOR INSTALLATION
Direct the heater in the appropriate angle.