manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. PUK
  6. •
  7. Underwater Lighting
  8. •
  9. PUK HYDRODIVE MINI User manual

PUK HYDRODIVE MINI User manual

ASSEMBLY AND OPERATING INSTRUCTIONS:
HYDRODIVE MINI LED
-Power consumption : 8W
-Voltage :24 Vdc
-Color Temperature : 3000K
-Lumen output: 07lm
-Lens Type : 30°
-Insulation class: III
-IP protection: IP 8 max 1mt depth
-Gross weight: 1.1kg
Made in Italy
COD. 305001
COD. 305002
COD. 305003
COD. 305001
COD. 305002
-replace the damaged protective glass
-sostituire i vetri di protezione se
danneggiati
-die Beschädigten Schutzgläser ersetzen
-remplacer les verres de protection abimés
-glass features: plane float glass - safety tempered
-caratteristiche vetro: vetro piano float di sicurezza temperato
-Glaseigenschaften: Float-Flachglas, gehärtetes Sicherheitsglas
-caractéristiques du verre: type de verre: plan“ float” de sûreté trempé
-getting rid of as urban waste forbidden
-separate collection is mandatory when the product is at the end of its life
-è vietato lo smaltimento come rifiuto
urbano
-è obbligatoria la raccolta separata a fine vita del
prodotto
-Das Entsorgen im Hausmüll ist verboten!
-Bei Ablauf der Lebensdauer bitte beachten:
-Abfalltrennung ist Pflicht
-il est interdit l’élimination comme ordure urbaine
-le rammassage separé est obligatoir lorsque le produit est à la fin de sa vie
-very low voltage feeding with security transformer
-Class III no earth required
-alimentazione solo con
trasformatore
di sicurezza a bassis-
sima tensione
-non necessita di messa a terra di
protezione
-für den Betrieb an Schutzkleinspannung ausgelegt
-Schutzleiteranschluss nicht zulässig
-alimentation à très basse tension par transformateur
Classe III de sécurité pas de mise à la terre
-totally
dust-proof
indefinite submerged operation - max allowed
depth
1m
-
totalmente protetto contro la polvere , stagno alla sommersione -
profondità massima d’immersione 1m
-Absolut
staubdicht
Für Unterwasserbetrieb - maximale Eintauch-
tiefe
1m
-totalement protégé contre la poussière
étanche pour immersion stable - profondeur max 1m
IP68
NB: These assembly instructions must be given to end users for correct maintenance and so that they know how to change the bulb.
The appliance must not be tampered with or transformed and it must be installed and used as supplied and in compliance with the
National Rules on Installations. Any non-compliant installations will invalidate all forms of guarantee. The company cannot be held
IK 08
HYDRODIVE MEDIUM LED
-Power consumption : 1 W
-Voltage :24 Vdc
-Color Temperature : 3000K
-Lumen output: 1183lm
-Lens Type : 30°
-Insulation class: III
-IP protection: IP 8 max 1mt depth
-Gross weight: 1. kg
HYDRODIVE MAXI LED
-Power consumption : 20W
-Voltage :24 Vdc
-Color Temperature : 3000K
-Lumen output: 1478lm
-Lens Type : 30°
-Insulation class: III
-IP protection: IP 8 max 1mt depth
-Gross weight: 2kg
COD. 305003
WARNING: THIS LUMINAIRE MUST BE USED ONLY UNDER WATER, THEREFORE CAN’T WORK OUT OF WATER
-feeding must be done through a safety power (SELV) providing 2 V DC stabilized secondary tension.
The floodlight is supplied by us with the led pre-installed and connected with 3 meters cable section 2x1mm2 according CENELEC
HD 22.16.S1
(for AD8 water submersion).
The cable and the fixture must not be tampered with for any reason.
-max. installation depth 1m.
Relamping and maintenance:
-The relamping must be done with maximum attention avoiding to dirty the sealing gasket and its contact surface. It is therefore
necessary before
opening the fixture to carefully wipe the floodlight then unscrew the round frame by the proper key
-If the gasket is damaged, deformed or not in perfect conditions it is necessary to change it
-it is essential to do a frequent cleaning of the glass and of the outer surface of the fixture to avoid build up of mud and dirtiness
resulting in dangerous
overheating due to uncorrect light and heat dissipation. Clean carefully the glass screen removing limestone deposits by means of a
scraper.
LE VERSION - RISK GROUP 2:
CAUTION: Possibly hazardous optical radiation emitted from this product. o not stare at operating lamp. May be harmful to the
eye.The replacement must be done by a qualified electrician.
INSTALLATION:
-SWITCH-OFF THE POWER SUPPLY BEFORE CARRYING OUT ANY MAINTENANCE OPERATION
1-Unscrew the two screws of the bracket using the hexagonal key included in the package, then remove the bracket
2-choice the fixation point correspondant to the feeding point.
3–making two holes for the fixing bracket using anchors (type fischer) not included in the package, for the dimensions see the dra-
wing
-making the appropriate electrical connection.
5-reassembling the lamp body with the bracket tighten the external screws and making the desired orientation.
Wiring for 24Vdc

This manual suits for next models

2

Popular Underwater Lighting manuals by other brands

Hayward ColorLogic® 4.0 installation guide

Hayward

Hayward ColorLogic® 4.0 installation guide

Nitelighter NL35 Installation & operation manual

Nitelighter

Nitelighter NL35 Installation & operation manual

Hayward 7016849 user guide

Hayward

Hayward 7016849 user guide

Alpine Power Beam PLM120 instruction manual

Alpine

Alpine Power Beam PLM120 instruction manual

Shadow-Caster COLOR CASTER SCR-24-CC operating instructions

Shadow-Caster

Shadow-Caster COLOR CASTER SCR-24-CC operating instructions

Messner UWL 1275/Tec operating instructions

Messner

Messner UWL 1275/Tec operating instructions

RGBlue System 01/02:re instruction manual

RGBlue

RGBlue System 01/02:re instruction manual

Seliger AQUA-STAR operating instructions

Seliger

Seliger AQUA-STAR operating instructions

Astral Pool RGB LUMIPLUS MANUAL FOR ELECTRICAL CONNECTION

Astral Pool

Astral Pool RGB LUMIPLUS MANUAL FOR ELECTRICAL CONNECTION

Sea & Sea YS-D3 DUO instruction manual

Sea & Sea

Sea & Sea YS-D3 DUO instruction manual

Sea & Sea YS-03 SOLIS instruction manual

Sea & Sea

Sea & Sea YS-03 SOLIS instruction manual

LIGMAN FUNEN 2 installation manual

LIGMAN

LIGMAN FUNEN 2 installation manual

NORBIT AQUA FCL600 quick guide

NORBIT

NORBIT AQUA FCL600 quick guide

hentech HT001BL-T1 instruction manual

hentech

hentech HT001BL-T1 instruction manual

PXM PxAqua 3 SF 12V user manual

PXM

PXM PxAqua 3 SF 12V user manual

LIGMAN FUNEN 1 instruction manual

LIGMAN

LIGMAN FUNEN 1 instruction manual

Wibre 4.0291 installation manual

Wibre

Wibre 4.0291 installation manual

Lumitec Kraken 101638 installation instructions

Lumitec

Lumitec Kraken 101638 installation instructions

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.