Sea & Sea YS-03 SOLIS User manual

YS-03
UNDERWATER STROBE
03116
03541

E-15
Connecting the Strobe
CAUTION
When shooting, set the built-in flash of the camera to the
forced-flash mode. The strobe will not fire unless the built-in
flash of the camera fires. Refer to the digital camera instruction
manual for setting the forced-flash mode.
Refer to the fiber-optic cable instruction manual before use.
When using this model together
with the SEA&SEA
DX-8000G/DX-1G/DX-2G set
（discontinued products） , please
attach the fiber-optic cable adapter
(included in the
DX-8000G/DX-1G/DX-2G) to the
housing, and then use a fiber-optic
cable.
Refer to the housing instruction manual before use.
Fiber-optic cable
adapter
The fiber-optic cable socket (for additional strobe) is not a slave
sensor. When using this strobe as a main strobe etc., another
strobe can be added using a fiber-optic cable.
Main strobe Sub-strobe
Fiber-optic cable
When using the second strobe