Pulsar ARAD1S User manual

INSTALLATION GUIDE
ENGLISH
Code: ARAD1S
Name: RACK 1U/270mm universal enclosure
for RACK 19" cabinets
Metallic enclosure for RACK cabinet: CCTV, KD, SSWiN, RTV, LAN
IM ARAD1S
Edition: 2 from 03.11.2021
Supersedes the edition: 1 from 20.03.2017
EN
1. Intended use:
Due to its design, the ARAD1S enclosure is intended for mounting inside RACK 19'' cabinets. This general-
purpose enclosure may serve as an auxiliary element for integrating CCTV, AC, I&HAS, RTV, LAN systems in RACK 19''
cabinets. It is intended for mounting alarm control panels, AC controllers, power supply units, batteries, etc.
2. Description
The enclosure is designed for mounting any type of electronics with small dimensions. The enclosure accommodate
it features tampering protection (against unwanted opening). To enable leading cables into the enclosure, one can buy a
cable protection conduit of any length and a cable gland. The conduits and the cable glands are available at the following
codes:
1) ARAP16P –cable gland, inside diameter 16 mm –connection between the protection conduit and the enclosure
2) ARAP21P –cable gland, inside diameter 21 mm –connection between the protection conduit and the enclosure
3) MM019 –cable protection conduit , inside diameter 16 mm
4) MM020 –cable protection conduit, inside diameter 21 mm
The ARAD1P enclosure has a space for up to 2x ARAP16P and 3x ARAP21P cable glands.

2
3. Assembling instructions:
The ARAD1S enclosure is butt mounted to RACK 19” profiles, the front part is the load-bearing part of the
enclosure. For this method of installation, a load capacity is up to 2 kg.

3
4. Accessories:
Wires can be introduced in three ways:
a) - Through rubber grommets,
b) - Using the MM019/MM020 protection tubes,
c) - Using the MM019/MM020 protection tubes and the ARAP16P/ARAP21P cable glands.
5. Specifications
SPECIFICATIONS
Tampering protection
1x –against unwanted opening of the enclosure
Max. load of TAMPER output
500mA@50 V DC
Enclosure: IP
IP 20
Operation temperature
-10ºC÷40ºC
Relative humidity RH –max.
90 [%]
Internal dimensions
(W x H x D)
390 x 40 x 265
[-/+2] [mm]
Materials
Sheet metal DC01, 1,0mm thick + front panel thickness: 1,5mm
Rust protection
Colour: RAL 9005 BLACK
Use
inside
Net weight
~2,52 [kg]
Gross weight
~2,80 [kg]
Declarations, warranty
CE, 2 years from production date
Pulsar sp. j.
Siedlec 150, 32-744 Łapczyca, Poland
Tel. [phone], Fax. [phone]
e-mail: [e-mail], [e-mail]
http:// www.pulsar.pl, www.zasilacze.pl