INTALLATION MANUAL
ENGLISH
code: AWO 610
name: Enclosure DIN1
metal enclosure for: SSWiN, KD,….
IM610
1st Edition, 02 Feb 2012
Supercedes t e: ------------------------ edition
1. Intended use:
Due to its design, t e AWO610 enclosure can be used as an integrating part of installation systems, suc as: CCTV, KD,
SSWiN, etc. T e enclosure is to be used for mounting (depending on configuration):
•system KD controller and additional modules or ot er devices adjusted for mounting on a TH/TS35 (35mm) DIN
rail
•transformer, series: TRP, TRZ, TOR
•
enclosed power supply units, series: PS, PSB
2. roduct description:
T e enclosure includes a 315mm-long DIN rail mounted to t e bottom. It is equipped wit a mounting plate, for
transformers or power supply units. T e enclosure accommodates a 17A /12V battery. Anti-tampering system indicates
an unaut orized opening of t e enclosure. T ere is also a possibility to mount an additional anti-tampering system, w ic
would prevent t e device from being ripped off t e wall (PKAZ005). In a basic version, t e enclosure is bolted in t e
faceplate wit 2 screws. T e faceplate is embossed so t at a lock assembly can be fitted. T e lock can ave t e same
code: MR027, or a different one: MR008.
T ere is an 8mm space between t e enclosure and t e wall for t e cables of t e device accommodated by t e enclosure.
3. Mounting:
T e enclosure s all be mounted by a qualified installer wit appropriate permissions and qualifications for
230V/AC installations and low-voltage installations (required and necessary for a given country). It s all be fitted in
confined spaces, according to t e environment class II, wit normal air umidity (RH=90% max. wit out condensation)
and t e temperature from -10°C to +40°C.
4. Specifications:
S ECIFICATIONS
Fitting battery 17Ah/12V
Anti-tamper protection 1x – enclosure opening
TAMPER – output ampacity (max) 500mA@50Vdc
Enclosure: IP I 20
Operating temperature -10ºC÷40ºC
Relative umidity RH – max. 90 [%]
Internal dimensions
(WxHxD)
345 x 355 x 80
[-/+2] [mm]
Additional accessories
Lock assembly, same code: MR027
Lock assembly, different code: MR008
Insulating gland M20x1,5
TAM ER, against ripping off the wall ( KAZ005)
Materials
Sheet metal DC01, thickness: 1,0mm
Rust protection
Colour: RAL 7035 grey, texture finish
Use Inside/
Surface-mounted
Net weig t ~3.80 [kg]
Gross weig t ~4.10 [kg]
