Pulsar SF116-CRB User manual

1
SF116-CRB
v1.2
SF116-CRB 16-ports switch with buffer power supply
for 16 IP cameras and recorder, with recorder space
PL
Edition: 4 from 14.02.2019
Supercedes the edition: 3 from 02.07.2018 EN**
Features:
PoE uninterruptible power supply of 16 IP cameras
uninterruptible power supply of the recorder (12 V DC)
Switch 16 ports
16 PoE ports 10/100 Mb/s, (1÷16 ports) (data and power
supply)
2 port 10/100/1000 Mb/s (G1/TP, G2/TP2 ports)
2 porty 10/100/1000 Mb/s SFP (G1/SFP, G2/SFP ports)
Supports auto-learning and auto-aging of MAC addresses
(16K size)
30 W for each PoE port, supports devices complaint with
the IEEE802.3af/at (PoE+) standard
Approximate backup time: 4h
LED indication
Metal housing - color white RAL 9003, which
can accommodate 4x17 Ah/12 V batteries and
offers the possibility of recorder installation
The enclosure construction is compliant
with the requirements of the General Data
Protection Regulation GDPR (the possibility
of installing two locks with different codes)
Space for a recorder with the following
dimensions max. 400x345x80 WxHxD
warranty –2 year from the production date
Example of use.
CONTENTS
1. Technical description.
1.1 General description
1.2 Block diagram
1.3 Description of components and connectors
1.4 Technical parameters
2. Installation.
2.1 Requirements
2.2 Installation procedure
3. LED indication
3.1 Optical indication of the switch operation.
3.2 LED indication of operating status.
4. Maintenance.

2
1. Technical description
1.1. General description.
The SF116-CRB is a complete solution for uninterruptible power supply of 16 IP cameras 54 V DC power supply
and uninterruptible power supply of the DVR (12 V DC power supply). The enclosure has a battery compartment for 4x17
Ah/12 V batteries (connected in series) and a recorder. The enclosure construction is compliant with the requirements of
the General Data Protection Regulation GDPR (the possibility of installing two locks with different codes).
The main elements of this system include:
- 16 ports PoE switch
- four batteries (4 x 17 Ah/12 V, connected in series), 54 V DC uninterruptible power supply unit
- 12 V DC (DC/DC50HV) buck converter (DVR power supply)
In case of power decay, a battery back-up is activated immediately.
The approximate backup time is given assuming that all output ports are used (using typical devices and 17 Ah
batteries). The electricity consumption for own needs and the energy efficiency of the power intake track were taken into
account. The exact description of how to perform the calculations can be found at: "Approximate backup time - assumptions for
calculations".
Automatic detection of any devices powered in the PoE/PoE+ standard is enabled at the 1 –16 ports of the switch. The
G1/TP, G2/TP ports is used for connection of another network device via RJ45 connector. The switch is fitted with SFP slots;
the use of fiber optic module (GBIC) allows fiber optic transmission. The LEDs at the front panel indicate the operation status
(description in the table. 3).
The switch is housed in a metal enclosure (color RAL 9003) which can accommodate 4x17 Ah/12 V battery. The
enclosure features a micro switch tamper indicating door opening (front panel). The SF116-CRB is fitted with two LEDs on the
front panel (red LED –indicates 230 V power supply of the PSU, green LED indicates the presence of DC voltage).
The PoE technology ensures a network connection and reduces installation costs by eliminating the need to supply a
separate power cable for each device. This method allows supplying other network devices, such as IP phone, wireless
access point or router.
1.2 Block diagram.
Fig. 1. Block diagram.

3
1.3 Description of components and connectors.
Fig. 2. The enclosure view.
Table 1. Elements of the power supply.
Component No.
(Fig. 2)
Description
[1]
16 ports PoE switch
[2]
Switch mode buffer power supply unit 54 V DC PSB-3004850
[3]
DC/DC50HV converter
[4]
Output filter in the power circuit of the recorder
[5]
Tamper –terminals of tamper protection (NC)
[6]
Space for batteries (4x17 Ah/12 V)
[7]
Space for a recorder (straps for mounting the recorder)
with the following dimensions max. 400×345×80 W×H×D
[8]
L-N power supply connector 230 V, protective connector
[9]
B+, B- : battery output +BAT red, -BAT black
[10]
DVR power cord terminated with the DC 2.1/5.5 plug

4
Fig. 3. The view of the switch.
Table 2. Elements of the switch
Component No
(Fig. 3)
Description
[1]
16 x PoE port (1÷16)
[2]
2 x UPLINK ports (G1/TP, G2/TP)
[3]
2 x UPLINK ports (G1/SFP, G2/SFP)
[4]
Yellow PWR LED –the main supply of the switch
[5]
LED lights –PoE power status at the PoE sockets
LINK/ACT –LAN connection status
[6]
(DC INPUT) power supply socket
1.4 Technical parameters
- parameters of the switch (tab.3)
- electrical parameters (tab.4)
- mechanical parameters (tab.5)
- operation safety (tab.6)
- operating parameters (tab.7)
Table 3. Parameters of the switch
Ports
16 x PoE (10/100 Mb/s) (RJ-45)
2 x UPLINK (10/100/1000 Mb/s) (RJ-45)
2 x UPLINK (10/100/1000 Mb/s) (SFP)
with connection speed auto-negotiation and MDI/MDIX Auto Cross)
PoE power supply
IEEE 802.3af/at (1÷16 ports), 54 V DC / 30 W at each port *
Protocols, Standards
IEEE802.3, 802.3u, 802.3x CSMA/CD, TCP/IP
Bandwidth
14,8Gbps
Transmission method
Store-and-Forward
Optical indication of
operation
Switch power supply;
Link/Act;
PoE Status
*The given value of 30 W per port is the maximum value. The total power consumption should not exceed 192 W.
Table 4. Electrical parameters
Mains supply
~200-240 V; 50 Hz
Current up to
1,5 A
Supply power
267 W
Output current at the PoE ports (RJ45)
16 x 0,6 A ΣI=4 A (max.)
Output voltage at the PoE ports (RJ45)
44÷54 V DC
Power supply output current of the recorder
4 A
Power supply output voltage of the recorder
12 V DC
Battery charge current
0,5 A max. (+/-5 %)
Approximate backup time
4h
Short-circuit protection SCP and overload protection OLP
electronic, automatic recovery
PSU current consumption
0,25 A
Battery circuit protection SCP and reverse
polarity connection
melting fuse
Deep discharge battery protection UVP
U<38 V (± 5 %) –disconnect of connection battery

5
Table 5. Mechanical parameters
Dimensions
W=525, H=680, D+D1=165+14 [+/- 2 mm]
W1=530, H1=685 [+/- 2 mm]
The dimensions of the recorder
compartment
W2=400, H2=345, D2=80 [+/- 2mm]
The dimensions of the battery
compartment
370x180x80 (WxHxD)
Gross/Net weight
17,0 / 18,1 kg
Enclosure
Steel plate, DC01 1,0mm color white RAL 9003
Closing
Cheese head screw x 2 (at the front)
The possibility of installing two locks with different codes.
Connectors
Power supply of the cameras: RJ45 socket
Power supply for recorder: DC2,1/5,5 plug
battery output BAT: 6,3F-2,5
TAMPER output: wires
Table 6. Operation safety
Protection class PN-EN 609501:2007
I (first)
Protection grade PN-EN 60529: 2002 (U)
IP20
Electrical strength of insulation:
- between input and output circuits of the PSU
- between input circuit and protection circuit
- between output circuit and protection circuit
3000 V AC min.
1500 V AC min.
500 V AC min.
Insulation resistance:
- between input circuit and output or protection circuit
100 MΩ, 500 V DC
Declarations
CE
Table 7. Operating parameters
Operating temperature
-10 ºC...+40 ºC
Storage temperature
-20 ºC...+60 ºC
Relative humidity
20 %...90 %, without condensation
Vibrations during operation
unacceptable
Impulse waves during operation
unacceptable
Direct insulation
unacceptable
Vibrations and impulse waves during transport
According to PN-83/T-42106
2. Installation
2.1. Installation procedure
The device shall be mounted in confined spaces, according to the environment class II, with normal air humidity
(RH=90 % max. without condensation) and the temperature from -10 °C to +40 °C. Ensure the free flow of air around the unit.
The PSU shall work in a vertical position that guarantees sufficient convectional air-flow through ventilating holes of the
enclosure.
Before installation, prepare a Switch'a load balance. The given value of 30 W per port is the maximum value referring to a
single output. The total power consumption should not exceed 192 W. The increased demand for power is particularly evident
in the case of cameras with heaters or infrared illuminators - when launching these features, the power consumption increases
rapidly, which may adversely affect the operation of the switch. As the device is designed for a continuous operation and is not
equipped with a power-switch, therefore an appropriate overload protection shall be guaranteed in the power supply circuit.
Moreover, the user shall be informed about the method of unplugging (usually through assigning an appropriate fuse in the
fuse-box). The electrical system shall follow valid standards and regulations.

6
2.2. Installation procedure
Before installation, cut off the voltage in the 230 V power-supply circuit.
To switch power off, use an external switch, in which the distance between the contacts of all
poles in the disconnection state is not less than 3mm.
1. Mount the PSU in a selected location and connect the wires.
2. Connect the power cables (230 V) to L-N clips of the PSU.
The shock protection circuit shall be performed with a particular care, i.e. the yellow and green
wire coat of the power cable shall stick of the terminal - marked with ‘ ‘symbol on the PSU
enclosure. Operation of the PSU without the properly made and fully operational shock protection
circuit is UNACCEPTABLE! It can cause a device failure or an electric shock.
3. Connect the ground wire to the terminal marked with the symbol (power supply module connector). Connect the
ground wire to the clip marked by the earth symbol . Use a three-core cable (with a yellow and green PE protection
wire) to make the connection. Lead the cables to the appropriate clips through the insulating bushing of the connection
board.
4. Connect the power (230 V).
5. Connect the battery pack according to the drawing:
- battery output (+): BAT+ cable / red,
- battery output (-): BAT –cable / GND / black.
Caution! Connect 4x17 Ah/12 V batteries in series
6. Connect the camera cables to the RJ45 connectors (PoE connectors –sockets RJ45 from 1 to 16).
7. Connect the remaining LAN devices to RJ45 or SFP connectors (using a GBIC)
(G1/TP or G1/SFP and G2/TP or G2/SFP)
CAUTION! G1/TP and G1/SFP connectors can not operate simultaneously
CAUTION! G2/TP and G2/SFP connectors can not operate simultaneously
8. Connect the power supply of the DVR –DC plug 5,5/2,1.
9. Check the optical indication of the switch operation.
10. After installing and checking proper working, the enclosure can be closed.
Connection schemes

7
3. LED indication.
3.1 Optical indication of the switch operation.
OPTICAL INDICATION OF THE SWITCH's POWER SUPPLY
YELLOW LED LIGHT (Power)
Indication of the switch's
power supply
OFF –no power supply of the switch
ON –power supply on, normal operation
OPTICAL INDICATION OF THE SWITCH's POWER SUPPLY (1÷16)
GREE LED LIGHT (LINK)
The connection status of LAN devices,
10 Mb/s or 100 Mb/s
and data transmission
OFF- no connection
ON - the device is connected; 10 Mb/s or 100 Mb/s
Blinking –data transmission
GREEN LED LIGHT (PoE)
Indication of the PoE power supply at the
RJ45 ports
OFF- no power supply at the RJ45 port (the device is not connected or not compliant with the
IEEE802.3af/at standard)
ON –supply
Blinking –short-circuit or output overload
OPTICAL INDICATION AT THE UPLINK PORTS (G1/TP, G2/TP, G1/SFP, G2/SFP)
GREEN LED LIGHT
No light (OFF) - no connection or LAN device is not connected
ON - LAN device connected (port busy, do not connect the device)
Blinking –data transmission (do not connect the device, even if the slot is empty)
CAUTION! G1/TP and G1/SFP sockets can not operate simultaneously
CAUTION! G2/TP and G2/SFP sockets can not operate simultaneously
3.2 LED indication of operating status.
The PSU is equipped with two diodes on the front panel:
RED LED:
on –the PSU is supplied with 230 V
off –no 230 V supply
GREEN LED:
on –DC voltage in the AUX output of the PSU
off –no DC voltage in the AUX output of the PSU
Installation example of the SF116-CRB with batteries and the recorder
(DVR and accumulators are not included)

8
4. Maintenance.
Any and all maintenance operations may be performed following the disconnection of the PSU from the power supply
network. The PSU does not require performing any specific maintenance measures, however, in case of significant dust rate, its
interior is recommended to be cleaned with compressed air. In case of fuse replacement, use a replacement of the same
parameters.
WEEE LABEL
Waste electrical and electronic equipment must not be disposed of with normal household waste.
According to the European Union WEEE Directive, waste electrical and electronic equipment
should be disposed of separately from normal household waste .
The power supply unit is adapted for a sealed lead-acid battery (SLA). After the operation period it must not be disposed of but recycled according to the
applicable law.
Pulsar sp. j.
Siedlec 150, 32-744 Łapczyca, Poland
Tel. [phone], Fax. [phone]
e-mail: [e-mail], [e-mail]
http:// www.pulsar.pl, www.zasilacze.pl